Distibuted Control System (DCS) Fiber Ring Upgrades

Introducing the Rod Sentinel. Sivam has designed and patented the first fail safe, surface controlled subsurface safety valve for sucker rod application called rod sentinel - an innovative technology that changes the game in dual barrier policy of the oil and gas market. This Sivam safety valve can be applied in all sucker rod completed wells where it is necessary to comply with the dual barrier policy. The Rod Sentinel SCSSSV can be installed in landing nipple for 2.81 inches surface controlled wireline retrievable insert valves with standard profiles. The Rod Sentinel SCSSSV lock mandrel has been designed to be installed and retrieved by the sucker rod string in combination with the pump plunger so it completely avoids the cost and risk of a workover. The beam pump safety valve was designed in compliance with the fail-safe concept. Control line pressure keeps the valve open and when the pressure fails the preloaded power spring in the valve pushes the sealing pads within the cone housing and the valve closes using the same hydraulic control line technology as a conventional SCSSSV.

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Introducing the MHA Motorhead Assembly from Marlin Oil Tools: A Comprehensive Downhole Solution for Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present the MHA Motorhead Assembly, an innovative downhole tool designed to enhance the efficiency and safety of coiled tubing operations within the oil and gas sector. As a versatile component of the Bottom Hole Assembly (BHA), the MHA Motorhead Assembly is engineered to operate seamlessly with or without a motor, offering flexibility for a wide range of well intervention tasks. Featuring key components like the Back Pressure Valve (BPV), Hydraulic Disconnect (HDI), and Dual Circulation Sub (DCS), the MHA is your all-in-one solution for optimized downhole performance. Key Features of the MHA Motorhead Assembly: Versatile Use: Whether installed above a motor or run independently, the MHA provides critical functionality for well intervention operations. Comprehensive Assembly: Includes essential parts such as the BPV for well pressure control, the HDI for secure and efficient tool separation, and the DCS for enhanced fluid management. Enhanced Operational Safety: The inclusion of a Back Pressure Valve ensures controlled pressure conditions, minimizing the risk of blowouts or other well control issues. Reliable Disconnect Capability: The Hydraulic Disconnect allows for a swift and safe disengagement from the lower BHA components under challenging conditions, enhancing operational safety and flexibility. Improved Fluid Circulation: The Dual Circulation Sub enables operators to manage downhole fluid dynamics effectively, optimizing well cleaning and treatment processes. Elevate your coiled tubing operations with the MHA Motorhead Assembly from Marlin Oil Tools, a leading-edge downhole solution tailored for the oil and gas industry. Designed for versatility and efficiency, the MHA integrates critical components like the BPV, HDI, and DCS into a single assembly, streamlining your BHA configuration for various well intervention scenarios. Whether conducting well cleanouts, stimulations, or other interventions, the MHA Motorhead Assembly offers the reliability, safety, and performance necessary to achieve operational success. Opt for the MHA from Marlin Oil Tools for a comprehensive approach to downhole challenges. Why Choose the MHA Motorhead Assembly from Marlin Oil Tools? Operational Versatility: Adapts to different well intervention needs with or without a motor, ensuring broad application scope. Integrated Safety Features: Combines pressure control, secure disconnection, and fluid management into one assembly for enhanced safety. Streamlined BHA Integration: Simplifies the BHA setup, reducing the need for multiple tools and ensuring compatibility across operations. Enhanced Efficiency and Safety: Delivers improved operational outcomes with built-in safety mechanisms, minimizing risks and enhancing performance. The MHA Motorhead Assembly by Marlin Oil Tools represents the forefront of innovation in coiled tubing tool technology, providing operators with a versatile, safe, and efficient solution for maximizing well intervention results. Incorporate the MHA into your coiled tubing operations to ensure superior downhole performance and operational success.

Introducing the KNJ Knuckle Joint from Marlin Oil Tools: The Essential Downhole Tool for Enhanced Flexibility in Well Intervention Operations Marlin Oil Tools proudly presents the KNJ Knuckle Joint, a state-of-the-art downhole tool engineered to provide unparalleled flexibility to the Bottom Hole Assembly (BHA) during well intervention tasks. Designed to navigate through the most challenging sections of the well, including sharp narrows, thresholds, and various obstacles, the KNJ Knuckle Joint is an indispensable tool for ensuring the success and efficiency of well interventions. Key Features of the KNJ Knuckle Joint: Superior BHA Flexibility: The KNJ Knuckle Joint significantly enhances the flexibility of the BHA, enabling it to easily navigate through complex wellbore geometries. Overcomes Downhole Obstacles: Specifically designed to aid in overcoming difficult wellbore obstacles, the KNJ ensures smooth passage in areas that would otherwise pose significant challenges. Seamless Integration: The KNJ Knuckle Joint integrates seamlessly with other downhole tools within the BHA, providing a cohesive solution for well intervention operations. Optimized Well Intervention: By allowing for enhanced maneuverability and flexibility, the KNJ Knuckle Joint optimizes well intervention procedures, reducing the risk of tool sticking and minimizing the need for additional runs. SEO Optimized Description for Marlin Oil Tools’ KNJ Knuckle Joint: Elevate your well intervention capabilities with the KNJ Knuckle Joint from Marlin Oil Tools, a leading-edge solution designed to enhance the flexibility and maneuverability of the BHA in challenging wellbore environments. Tailored for navigating sharp narrows, thresholds, and other downhole obstacles, the KNJ Knuckle Joint is essential for any operation requiring advanced BHA adaptability. Its seamless integration with other downhole tools ensures a comprehensive approach to well intervention, making the KNJ Knuckle Joint a must-have for overcoming complex well geometries and optimizing intervention success. Why Choose the KNJ Knuckle Joint from Marlin Oil Tools? Enhanced Operational Flexibility: Maximizes BHA adaptability to navigate complex wellbore paths efficiently. Critical for Challenging Wellbores: Designed to tackle the most difficult downhole conditions, ensuring smooth operation. Increases Intervention Success: Reduces the likelihood of tool sticking and operational delays, enhancing overall success rates. Versatile and Reliable: A versatile tool that offers reliability and performance, crucial for a wide range of well intervention scenarios. The KNJ Knuckle Joint by Marlin Oil Tools represents the pinnacle of downhole tool innovation, offering operators the flexibility and reliability needed to tackle the most challenging well intervention tasks. Incorporate the KNJ Knuckle Joint into your well intervention toolkit to achieve superior performance and operational efficiency.

The spill kit contains, 5 Oil-Only Absorbent Pads, 3 Oil-Only Absorbent Pillows, 2 Oil-Only Absorbent Socks (3"x4'), Disposal bags, Nitrile gloves. This spill kit for effective and efficient cleanup and containment of oil-based spills in various settings. The kit, equipped with Oil-Only Absorbent Pads, Pillows, Socks, disposal bags, and Nitrile gloves, provides a comprehensive solution for managing and addressing oil spills. It can be particularly useful in industrial facilities, storage areas, transportation operations, or any environment where oil-based liquids are handled. The spill kit has a total absorption capacity, capable of soaking up 15 liters (3.87 gallons) of liquid. This means that oil-based spills, the combined capabilities of the Oil-Only Absorbent Pads, Pillows, and Socks within the kit allow for the containment and absorption of up to 15 liters of spilled liquids. This substantial capacity ensures that the spill kit is well-equipped to handle moderate to sizable spills, making it a reliable and effective solution for various industrial and environmental settings. Oil-Only Absorbent Pads Oil-Only Absorbent Pads are highly effective for the rapid cleanup of oil-based spills. Made from polypropylene material, these pads are specifically engineered to selectively absorb oils while repelling water. The pads boast a fine-fiber construction, allowing for quick absorption and retention of oil-based liquids. With a size of 12” x 12”, these pads are versatile and can be used in various settings, including industrial facilities, automotive workshops, and marine environments. Oil-Only Absorbent Pillows Oil-Only Absorbent Pillows are strategically deployed on oil-based spills for rapid absorption. Their polypropylene construction ensures targeted cleanup, selectively absorbing oils while repelling water. These pillows contribute to the efficiency and environmental responsibility of spill response in workplaces where oil-based liquids are handled. Oil-Only Absorbent Socks (3"x4') Oil-Only Absorbent Socks are placed to create a barrier, containing, and preventing the spread of oil-based spills. It allows to adapt to different surfaces, ensuring efficient and targeted spill response. These socks are integral components of spill kits and are valuable in various industries where oil-based liquids are handled. Usage of Disposal bags Disposal bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met oil-based spills. Nitrile gloves Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. Applications: • Integral part of spill kits • Used in industrial facilities, and areas handling oil-based liquids.

Secure Your Business with Security System Leasing from CWB National Leasing Enhancing Safety and Peace of Mind with Advanced Security Solutions In today's business world, the security of your premises, assets, and personnel is paramount. Leasing security systems through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and comprehensive solution for businesses seeking to bolster their security measures. Here’s how leasing security systems can benefit your business: 1. Rapid Access to Cutting-Edge Security Technology CWB National Leasing understands the critical importance of security in your business operations. They offer a swift leasing process, with decisions typically made within 48 hours of your application. This ensures that your security systems can be delivered and installed quickly, providing immediate enhancement to your security measures. 2. Increased Financial Flexibility Leasing security systems with CWB National Leasing enhances your buying power. It allows you to conserve capital by opting for manageable periodic payments over a significant upfront purchase. The flexibility to add extra features or accessories to your security systems for a small payment increase enables customization to meet specific security needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your security systems start contributing to your business’s safety while they're being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, essential for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in revenue, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing security systems can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease security systems through CWB National Leasing is a strategic decision that equips your business with essential safety tools while maintaining financial flexibility. It ensures access to the latest security technology, vital for protecting your business assets and personnel, without the financial strain of a large upfront investment. This leasing approach enables enhanced security, peace of mind, and a safe working environment, contributing significantly to the overall well-being and success of your business.

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.

Revolutionizing Wireless Connectivity in the Oil and Gas Industry with Nulux Network Solutions In an era where instant and reliable connectivity is paramount, especially in the meticulous domain of the oil and gas industry, seamlessly integrated wireless networks are not a luxury but a necessity. Navigating through the intricate operational matrices and colossal data, Nulux Network Solutions proffers unparalleled WiFi setup services, ensuring your wireless connectivity is robust, reliable, and resilient. Nulux: A Vanguard in Wireless Solutions Through our profound expertise in devising wireless systems and infrastructure, Nulux has become synonymous with impeccable wireless communication links. Whether it’s through point-to-point or multipoint radio networks, tower construction/rigging, or mesh networks, our dedicated team ensures that geographical and physical impediments become inconsequential in your communication and data transmission endeavors. Wi-Fi Access Points: A Linchpin of Operational Efficacy Navigating through bustling work environments in the oil and gas sector necessitates the deployment of wireless networks that are not only widespread but also impeccable in terms of performance and reliability. With Nulux’s unparalleled experience in the design and deployment of wireless networks, seamless connectivity transcends your office and permeates every corner of your operation - whether it be the warehouse, facility floor, or field sites. Deciphering Point to Point and Multipoint Configurations In the context of wireless networking: Point to Point (P2P) networks furnish a direct linkage between two nodes, ensuring streamlined communication and data transmission between them. This configuration, touted for its enhanced security, due to the dedicated nature of the connection, and increased productivity, ensures your data travels securely and uninhibited from one point to another. Multipoint configurations, on the other hand, establish a connection amongst more than two points, with a single line shared amongst multiple nodes. This configuration can be particularly beneficial in scenarios that demand centralized data access across various points. The Nulux Promise: Connectivity Beyond Boundaries Tethering on our commitment to ensuring your operations are perpetually connected and data transmissions are ceaselessly secure and reliable, our WiFi setup services promise: Ubiquitous Connectivity: Ensuring every node, regardless of its geographical positioning, is perpetually connected. Robust Security: Safeguarding your data transmissions against potential cyber threats and ensuring they traverse through a secure network. Operational Efficiency: Through our WiFi setups, we ensure your operational matrix, be it documentation review, QA-QC, or project planning, is continually enhanced and refined. Cost-Effective Solutions: Ensuring your wireless network, whether it be a point to point or multipoint configuration, is not only operationally beneficial but also financially viable. In the intricate and operationally critical realm of the oil and gas industry, ensuring your wireless connectivity is not only robust but also reliable and secure, is paramount. With Nulux Network Solutions, you’re not merely adopting a WiFi setup; you’re embedding a network that promises operational excellence, secure data transmissions, and an enhanced operational matrix. Connect with Nulux today and ensure your operations are always connected, your data transmissions always secure, and your wireless network is always reliable.

EnviroBlu is highly regarded for its cleaning effectiveness. It's designed as a powerful cleaner and degreaser that works well in industrial environments. The product's formulation allows it to break down dirt and grime at the molecular level, ensuring fast and reliable cleaning results. The 1-liter bottle's handy size also makes it convenient for spot cleaning and smaller tasks, offering a practical solution for maintaining hygiene and cleanliness in various industrial environments without the need for larger, bulkier containers. The 1-liter EnviroBlu cleaner- for maintaining hand tools and small equipment parts, and relatively small surfaces for daily use. Choose 1-liter EnviroBlu cleaner - for your hand tool and small equipment cleaning needs. Our 1-litre bottle delivers powerful cleaning performance while protecting the environment.

Introducing the X-SPAN Tubing/Casing Patch System from ID OILTOOLS! This proven, durable and dependable system is the solution you've been looking for to seal perforations, holes, splits, corrosion or leaks of any kind in all types of tubulars. The X-SPAN system is incredibly versatile and can be deployed using a myriad of methods in virtually any type of well bore. It's the economical and reliable solution for a wide range of applications, including shutting off unwanted water or gas influx, zonal protection for frac-through applications, repairing tubular leaks from pin holes to collar leaks, repairing corroded or eroded tubing or casing, as well as isolating frac ports and auxiliary tools in horizontal wells. With its large bore, the X-SPAN system allows for easy passage of service tools including bridge plugs, drop balls, seal bore assemblies, logging tools and perforating systems. Plus, its minimal surface equipment required for deploying the patch and rigless intervention results in significant savings for the operator. The metal-to-metal X-SPAN seal is proven technology engineered for high temperature applications while yielding the highest burst and collapse pressure ratings in the industry. The X-SPAN Tubing Casing Patch can be deployed to protect up to 300ft (91m) sections of tubing or casing on a single trip. Multi-trip stackable systems are available to span intervals longer than 300ft (91m). At ID OILTOOLS, we understand that extreme well bore environments require premium alloys. That's why we offer custom sized X-SPAN systems designed using premium alloys to meet your specific needs. Choose the X-SPAN Tubing/Casing Patch System from ID OILTOOLS for proven, reliable and versatile tubular repair solutions. Contact us today to learn more!

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.

SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT

ELEKS: Your Ultimate Nearshore Software Development Partner Unlock the potential of nearshore software development with ELEKS – your gateway to building top-tier technology solutions across borders. With 11 delivery centers spanning 8 countries, we offer you a seamless collaboration experience that transcends geographical barriers and propels your projects to new heights. ELEKS Nearshore Software Development: The Future of Collaboration Time Zone and Geographical Alignment: Experience a level of synchronicity that offshore development can't provide. ELEKS nearshore software development ensures smooth communication, collaboration, and project delivery. Our nearshore advantage means regular onsite visits and a working partnership that's as cohesive as it is efficient. Unified Cultural Approach: Integration goes beyond technology – it's about embracing culture. Our experts seamlessly blend with your in-house team, adopting your unique ethos. Beyond that, we transfer vital process and behavior-change knowledge, ensuring a truly unified and synergistic approach. Faster Product Launch: Elevate your go-to-market strategy with ELEKS as your nearshore development partner. Our streamlined processes and collaborative approach mean you can launch your product twice as fast. Time is of the essence in today's dynamic market – we help you seize it. Superior Quality of Work: Satisfaction is not a target; it's a standard. At ELEKS, we never rest until you're completely satisfied. Our unmatched client satisfaction rating of 97% speaks volumes about our commitment to excellence. Trust us to deliver top-notch results. Access to Top Talent: ELEKS' talent pool boasts 2000+ multi-skilled specialists rooted in math and physics. This means you can assemble the perfect team to bring your vision to life. The right talent is the foundation of success – with us, it's a given. Dedicated Team: Complexity meets capability with our dedicated teams. We handpick specialists with tailored skills to flawlessly execute your software vision. No matter how intricate your project, our experts are up to the task. ELEKS Global Presence: Spanning 18 locations across three continents, ELEKS ensures swift and streamlined communication. With us, you'll experience the efficiency and cost-saving benefits of offshore development coupled with accessible, onsite collaboration. ELEKS Nearshore Software Development: Where Innovation Meets Excellence Our Nearshore Software Development Services: Our portfolio is a testament to three decades of innovation and expertise. With a wide range of market-leading software and consultancy services, we cater to global clients with diverse needs. What Sets ELEKS Apart? • Nearly three decades of custom software development excellence • Extensive technology consulting prowess • Deep strategic product design proficiency with a UX-certified team • One of Ukraine's largest data science teams • Mitigate investment risk with MVP development • Trailblazing technological innovation through our in-house R&D lab Nearshore vs. Offshore vs. Onshore: A Winning Formula with ELEKS When scaling or upskilling is the name of the game, onshore development can be effective but pricey. Offshore options save you time and money, but often come with control trade-offs. ELEKS introduces the winning formula: nearshore development. It blends cost efficiency with quality, offering streamlined communication and onsite visits without compromising savings. ELEKS Nearshore Software Development: Your Bridge to Innovation Experience the best of both worlds – a nearshore team that combines accessibility with efficiency. ELEKS empowers you to transcend borders, embrace innovation, and redefine success. With us, your nearshore journey is a step towards a more collaborative and prosperous future.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Streamlining OCTG Tubular Goods Management with PipeDNA: Boosting Efficiency and Reliability Efficient management of OCTG (Oil Country Tubular Goods) is critical in the oil and gas industry to ensure the success of drilling and production operations. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage their OCTG tubular goods, increase visibility, and optimize their operations for enhanced efficiency and reliability. Comprehensive Inventory Management and Tracking: PipeDNA offers a comprehensive inventory management and tracking system specifically tailored for OCTG tubular goods. Gain full visibility into your OCTG inventory, including utilization, activity, and trends. By monitoring the status and location of each OCTG pipe, stakeholders can proactively plan for upcoming drilling projects, streamline logistics, and optimize inventory levels. PipeDNA enables accurate tracking, reducing the risk of stockouts, minimizing downtime, and maximizing operational efficiency. Efficient Logistics Management: With PipeDNA, stakeholders can efficiently manage all aspects of logistics operations related to OCTG tubular goods. From shipments to status tracking and documentation, PipeDNA simplifies the entire process, ensuring seamless coordination across multiple locations and parties involved. Furthermore, the platform facilitates pipe bundling, enabling stakeholders to optimize transportation and storage, minimizing costs and improving overall efficiency. Streamlined Inspection Management: PipeDNA's inspection management feature provides a centralized platform to manage inspection jobs for OCTG tubular goods across multiple sites. With real-time tracking and status updates, stakeholders can monitor the progress of inspection jobs, ensuring timely completion and adherence to quality standards. Additionally, the platform enables the management of inspection profiles, allowing for efficient scheduling, tracking, and reporting of inspection activities. Automated Tally Operations: Pipe tallying is a crucial process in OCTG tubular goods management, and PipeDNA simplifies this operation with automated tally operations. Stakeholders can create and manage tally operations within the platform, streamlining the process and eliminating manual calculations. By automating pipe tally jobs and workflows, PipeDNA saves time, reduces errors, and ensures accurate and up-to-date tally results, enhancing overall operational efficiency. Enhanced Identification and Traceability: PipeDNA offers quick and accurate identification of OCTG tubular goods, providing stakeholders with essential pipe details, activity history, and traceability documentation. With seamless integration of popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables easy identification and tracking of each pipe, ensuring precise inventory control and reducing the risk of misplaced or misused OCTG tubular goods. This enhanced traceability minimizes downtime and improves resource allocation. Designed for the Oil and Gas Industry: PipeDNA was specifically designed for stakeholders across drilling, manufacturing, and oilfield services, catering to their unique needs in OCTG tubular goods management. Whether you are a drilling contractor, oilfield rental company, oilfield and inspection service provider, steel pipe manufacturer, or pipe distribution and storage provider, PipeDNA offers tailored solutions to streamline your OCTG operations and drive efficiency. Leveraging Emerging Technologies: At its core, PipeDNA harnesses the power of today's emerging technologies to optimize OCTG tubular goods management processes. The platform seamlessly integrates with popular barcode standards, such as UPC, EAN, and QR codes, enabling efficient barcoding and labeling. Moreover, PipeDNA is RFID ready, supporting the integration of RFID technologies for accurate asset tracking. The platform also facilitates IoT data integration using the MQTT standard, enabling fast and reliable sensor data integration for enhanced decision-making. PipeDNA revolutionizes OCTG tubular goods management in the oil and gas industry, providing a smart cloud-based platform that enhances efficiency, reliability, and visibility. With its comprehensive inventory management, streamlined logistics operations, automated tallying, and robust identification and traceability features, PipeDNA empowers stakeholders to optimize their OCTG operations and make informed decisions based on real-time data. Leverage the power of PipeDNA and take your OCTG tubular goods management to new heights of efficiency and reliability.

Houston Digital Instruments (HDI Gauges) proudly introduces the HDI 1522 Choke Position Indicator System, a cutting-edge solution designed to monitor choke position with unparalleled accuracy in the oil and gas industry. With its solid-state electronic technology and versatile adaptability, the HDI 1522 offers exceptional performance, safety, reliability, and low maintenance for users. Let's explore the features and benefits of this innovative choke position indicator. Precise Monitoring with Advanced Technology: The HDI 1522 Choke Position Indicator System utilizes solid-state electronic technology to provide precise monitoring of choke position in 1% increments, ranging from 0% to 100%. This high level of accuracy enables operators to have real-time visibility and control over choke operations, optimizing production efficiency and safety protocols. Adaptability for Various Chokes: The HDI 1522 can seamlessly adapt to a wide range of chokes commonly used in the oil and gas industry. Whether it's a linear potentiometer, rotary potentiometer, or retractable potentiometer, the HDI 1522 accommodates different choke types, ensuring compatibility and flexibility for diverse operational requirements. This adaptability eliminates the need for multiple indicators, simplifying equipment management and reducing costs. Air Line-Free Design: One of the standout features of the HDI 1522 is its air line-free design. Unlike traditional choke position indicators that require air lines, the HDI 1522 operates without the need for air lines, minimizing complexity and potential issues associated with air line maintenance. This streamlined design enhances reliability and reduces downtime, contributing to improved operational efficiency. Safety, Reliability, and Low Maintenance: HDI Gauges are renowned for their commitment to safety, reliability, and low maintenance, and the HDI 1522 is no exception. Constructed with durable materials, including impact-modified, UV-stabilized polycarbonate/PBT alloy, the gauge provides long-lasting performance in challenging industrial environments. The gauge head's operating temperature range of -40°F to 176°F (-40°C to 80°C) ensures reliable operation in extreme conditions. Additionally, the HDI 1522 features a gasket seal for electronics protection, safeguarding the system from external elements and prolonging its lifespan. User-Friendly Display and Configuration Options: The HDI 1522 incorporates a user-friendly 3-digit digital display, offering clear visibility of choke position. The display includes a 0-100% scale and a linear analog bar graph, allowing operators to monitor choke position at a glance. A low battery indicator ensures timely battery replacement, preventing interruptions in monitoring operations. The gauge's viewing distance of 15 feet enables operators to access choke position information conveniently. The HDI 1522 also provides versatile configuration options to meet specific user requirements. These options include 4-20mA output (additional barrier required), 0-1 volt output, slave/secondary display capability, and serial output, enabling seamless integration with other indicator gauges and control systems. HDI Gauges' expertise and support ensure that clients can customize their HDI 1522 for optimal functionality and compatibility. Industrial Grade Design for Explosive Atmospheres: Safety is paramount in the oil and gas industry, especially in explosive atmospheres. The HDI 1522 is specifically designed to meet industrial-grade standards and can be safely deployed in explosive atmospheres. Its panel-mounted gauge with remote sensor connections enhances operational safety while complying with stringent industry regulations. The HDI 1522 Choke Position Indicator System from HDI Gauges revolutionizes choke position monitoring in the oil and gas industry. With its solid-state electronic technology, adaptability to various choke types, air line-free design, and robust construction, the HDI 1522 ensures accurate and reliable choke position monitoring, enhancing operational efficiency and safety. Experience the power of precision with the HDI 1522 Choke Position Indicator System and unlock greater control over your choke operations. Contact HDI Gauges today to explore how the HDI 1522 can elevate your oil and gas operations.

Half moon sheaves are designed to be used in conjunction with Sivam spooling units. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage.

Harmonizing Field Operations with Nulux Network Solutions: Elevating Field-bus Cabling in the Oil and Gas Sector The labyrinthine networks of the oil and gas industry necessitate not only precise and accurate communication but also a robust data transfer pathway that remains unflinchingly reliable amidst the operationally intense environments. Nulux Network Solutions, seasoned with two decades of expertise, introduces meticulous and operationally integral Field-bus Cabling Solutions. Why Nulux Shines in the Networking Cosmos When your business demands a network infrastructure that serves as an impervious and ever-reliable backbone, the bespoke solutions provided by Nulux ascertain that your operations remain perennially seamless. Our extensive experience spans myriad industrial projects, including crucial DCS network upgrades across North America, establishing us as a linchpin in telecommunication and networking sectors. Championed by a team devoutly centered around unyielding perfectionism, Nulux not only provides but enhances copper cabling systems, ensuring they are not merely conduits but formidable and resolute pathways for your data to traverse through. Crafting Copper Networks with Nuanced Precision At Nulux, our copper network services are not confined to mere installation but envelop a 360-degree solution space that guarantees: Meticulous design, planning, and installation of new/existing networks Strategic upgrades to bolster operational efficiency Bespoke solutions catering to voice, data, and video services Tailored approaches meeting your distinct requirements Sustained technical support across your project’s lifecycle Copper, as a medium, brings forth myriad benefits to your network infrastructure, including high-bandwidth transmission (up to 10 Gbps), pronounced reliability, effortless installation, cost-effectiveness, and the inherent flexibility, reliability, and durability essential for operationally intense industries. Nulux’s Field-bus Cabling Solutions: A Nexus between Technology and Operational Excellence Your field-bus networks are not mere communication channels but the vital sinews that link your operational components into a cohesive and synchronous unit. Nulux’s Field-bus Cabling solutions are meticulously crafted, ensuring: Operational Harmony: Linking your diverse field devices and controllers into a synchronized operational entity Data Integrity: Ensuring data packets traverse through your networks with fortified security and integrity Reduced Downtime: Minimizing operational disruptions through a reliable and constant communication channel Enhanced Diagnostics: Facilitating real-time data transfers that enable precise control and diagnostics Scalability: Providing a network that evolves in tandem with your operational expansions and technological integrations Entrust Your Operations with Nulux In the relentless and unforgiving operational theatres of the oil and gas industry, where every byte of data is pivotal, Nulux’s Field-bus Cabling Solutions stand as a silent sentinel ensuring your operations are perpetually communicated, coordinated, and controlled with unyielding reliability. With an in-depth understanding of what truly fuels operational competitiveness in your industry, our hard-working team assures that while you steer your focus towards your core operations, your field-bus network functions as an unwavering, steadfast, and efficient data highway. Invigorate your operations with Nulux Network Solutions, ensuring every device, controller, and operational node in your field is perpetually in symphony, dictating a future where your operations and network are in seamless unison. Reach out to Nulux Network Solutions for an initial consultation and begin a journey where your field-bus network becomes a catalyst for operational excellence and reliability.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.