¿No tienes una cuenta? Únete gratis
Para publicidad en
¿Interés en convertirse en vendedor? Obtener información
¿No tienes una cuenta? Únete gratis
Para publicidad en
¿Interés en convertirse en vendedor? Obtener información
¿Nuevo aquí? Regístrate
¿No tienes una cuenta? Únete gratis
Para publicidad en
¿Interés en convertirse en vendedor? Obtener información
¿Nuevo aquí? Regístrate
SC-2 Packer
También conocido como:
Sealbore PackerBuy
Made to Order
Product
New
API
Sea Freight
Título:
SC-2 Retrieable PackerNúmero de modelo:
SC-2Disponibilidad:
Made to OrderTiempo de entrega (semanas):
3 weeksChoose
Midastream Supply Company en Airdrie
Para información sobre productos o servicios, personalización u otras preguntas
Tipo de transacción
BuyCondición
NewPeso
Less than 100 lbsUbicación
CanadaTipo de compañía
Product ProviderGarantía de calidad
APIPrecio
Request for Quote Dependant on SpecMaterial
SteelNombre de la marca
BakerEnvío
Land FreightNotas
Retrievable SC-2 PackerFXE 2-7/8 inch Wireline Retrievable Surface Controlled Subsurface Safety Valve
WR-SCSSSV FXEMidastream Supply Company en Airdrie
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
C-1 Single Grip Invertible Packer
C-1 Baker PackerMidastream Supply Company en Airdrie
The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position.
Buy
In Stock
Product
API
Sea Freight
Premier Production Packer with Striker
Premier Striker PackerMidastream Supply Company en Airdrie
The Premier™ Packer with Striker™ interventionless packer setting system is a proven product for interventionless actuation of the Premier packer. It is the new class of “removable” packers designed for wells that demand the sealing performance of a permanent packer and the flexible workover options of a traditional retrievable packer. Because the Premier can be remotely actuated, rig time/cost is reduced and risks associated with standard well intervention setting methods, are minimized. This results in a cost-savings benefit for the operator. The Striker system is a device that generates packer setting force from hydrostatic well pressure. As a secondary or contingent setting method, it can also be set by hydraulic pressure. The Striker modular design is a derivation of the innovative and successful SB- 3H™ hydrostatic/hydraulic retainer production packer. It can be removed on the production string by cutting the mandrel with a chemical or mechanical cutting tool. The Premier system offers unique high-performance and multiple-removal options for high-cost intervention completions. We can source from current stock or direct from the manufacturer.
Buy
Made to Order
Product
New
API
Sea Freight
Capillary Deliquification Safety System
Cap StringMidastream Supply Company en Airdrie
In mature fields, liquid loading of gas wells is a common problem. In the short term, this can lead to decreased production, and if not managed correctly, can ultimately reduce overall reservoir recovery. One option for managing the problem is the use of surfactants as foaming agents to artificially unload the well. The preferred method would allow automatic and continuous delivery of these surfactants. The capillary deliquification safety system facilitates delivery of surfactants or other chemicals and liquids to a specified point within the completion, while maintaining the purpose and functionality of a downhole safety device. The deliquification safety system can be installed in an existing completion with the appropriate safety valve landing nipple (SVLN) profile — either a dedicated SVLN or within a tubing-retrievable safety valve (TRSV) in which the control system communication is activated to operate an installed wireline-retrievable safety valve (WLRSV). The system’s injection feature operates via the WLRSV control system. When control-line pressure reaches a predetermined pressure, a regulator installed below the WLRSV opens, allowing chemical injection to occur. Use of the existing control line provides a cost-effective method of installing a semi-permanent injection system without the need to modify the wellhead. The WLRSV is designed to shut in the well at a point below the surface and is opened with hydraulic control pressure. In this application, the applied chemical injection pressure maintains the safety valve in the open position during injection, and the valve closes when injection is stopped. Applications » Chemical injection for gas well deliquification or scale treatment purposes » Available for landing nipples/TRSVs with 2.75-in. and larger sealbores Features » Field-proven WLRSV » Equalizing or non-equalizing-type flapper closure *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Mud pump for circulating and drilling in extreme conditions
Mud Circulation SystemMidastream Supply Company en Airdrie
The Bomco Triplex Mud Pump has a herringbone design and is interchangeable with the Continental Emsco FB model. Mud pumps serve as the heart of the mud circulating system. Reciprocating piston pumps (also called slush pumps or power pumps) are widely used for drilling oil and gas wells. The advantages of the reciprocating positive-displacement pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameters of the compression cylinders (pump liners) and pistons. A pump that has single-action strokes in three cylinders is called a triplex pump.
Buy
In Stock
Distributor
New
API
Sea Freight
Surface Controlled Subsurface Safety Valve FRN 6-5/8 inch
WR-SCSSSV FRNMidastream Supply Company en Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company en Airdrie
The WL™packer is a new wireline-set, retrievable, high-performance production packer, run in combination with the L-10 on/off tool. The WL can be run as a temporary bridge plug by installing a blanking plug in the L-10 seal nipple, above the packer. This enables remedial or stimulation work above the packer. The plug can then be removed with conventional wireline methods, allowing production of the well to be resumed.
Buy
Made to Order
Product
New
API
Sea Freight
Firewater pump for offshore platforms and onshore installations
Firewater PumpMidastream Supply Company en Airdrie
Fire pumps are an essential part of many water-based fire protection systems. They are used to increase the pressure (measured in psi and bar) of a water source when that source is not adequate for the system it's supplying. As part of a fire sprinkler system, a fire pump receives water from either an underground water supply or a water tank, lake, or reservoir, and is powered by electricity or diesel fuel. The high-pressure supplied by the pump distributes water through the sprinkler system and hose standpipes. Fire pumps are typically made with non-corrosive internal parts to avoid clogging due to corrosion.
Buy
Made to Order
Product
New
ASME
Sea Freight
Midastream Supply Company en Airdrie
The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company en Airdrie
Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required.
Buy
In Stock
New
Midastream Supply Company en Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Midastream Supply Company en Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Wireline Retrievable FRN 4.5 inch SCSSSV
WR-SCSSSV 4.5Midastream Supply Company en Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
The Baker Hughes SC-2™ retrievable packer is a high-performance, retrievable, sealbore packer. It can be run and set on electric wireline, slick line/tubing with the same setting tools used for the D packer. We can source from current stock or direct from the manufacturer.
Envío:
Sea freight - Land freight | International shipment of items may be subject to customs processing and additional charges.
Situado en:
Canada
Provix en New Lowell
Enhance Your Mining Operations with Wisdom's KL5MS Corded Miner's Cap Lamp from Provix Provix is proud to introduce the Wisdom KL5MS Corded Miner's Cap Lamp, a top-tier lighting solution engineered to meet the rigorous needs of the mining industry. Combining advanced technology with user-focused design, the KL5MS ensures both safety and efficiency for miners under the most challenging conditions. Powerful and Efficient Illumination The KL5MS boasts a high-capacity 7,800mAh battery, delivering a continuous discharging time of 13 hours. It features a main light LED with a working voltage of 3.0V, current of 640mA, and power of 1.92W. This efficient configuration provides a luminous flux of 340 lm, along with an impressive initial lighting degree of 18,000 lx at 1 meter, ensuring excellent visibility in dark mining environments. Durability and Longevity Designed for the long haul, the KL5MS has a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery's life span extends to 1,200 cycles under normal working conditions, underscoring the lamp's reliability and long-term performance. Safety as a Priority Safety is paramount in mining, and the KL5MS is crafted with this in mind. It is explosion-proof, adhering to ATEX GROUP II standards, and has an IP68 waterproof rating. Additionally, the lamp features a short circuit protection time of less than 320 μs, further enhancing its safety profile. Ergonomic Design for Comfort The KL5MS is designed with the comfort of the miner in mind. Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), it offers ease of use and mobility. The compact dimensions of the battery box (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure that it is not cumbersome during extensive use. Quick and Convenient Charging With a charging time of just 4 to 7.5 hours, the KL5MS is ready for use quickly, reducing downtime and enhancing productivity. The USB charging feature adds an extra layer of convenience, allowing for easy charging in various settings. Get Yours Today Upgrade your mining gear with the Wisdom KL5MS Corded Miner's Cap Lamp for improved visibility, safety, and efficiency. Contact Provix for more information, visit our website at www.provix.net, or come see us in person. The Wisdom KL5MS is your key to safer, more efficient mining operations.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
PipeDNA en Houston
Enhancing Tubular Inspection Management with PipeDNA: Streamlining Quality Assurance in the Oil and Gas Industry In the oil and gas industry, ensuring the quality and integrity of tubular products is of paramount importance. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to effectively manage and streamline tubular inspection processes, enabling enhanced quality assurance and compliance. Efficient Management of Inspection Jobs: PipeDNA provides a comprehensive solution for managing inspection jobs across multiple sites. Stakeholders can easily create and track inspection jobs, monitor their status, and manage inspection profiles within the platform. This streamlined approach eliminates manual and time-consuming processes, ensuring efficient coordination and effective allocation of inspection resources. Real-time Job Status and Reporting: With PipeDNA, stakeholders can access real-time updates on the status of inspection jobs. The platform enables instant communication and collaboration between inspectors, supervisors, and other relevant parties involved in the inspection process. By providing a centralized hub for reporting and documentation, PipeDNA enhances transparency and allows for swift decision-making based on accurate and up-to-date information. Tailored Inspection Profiles: PipeDNA allows stakeholders to create and manage inspection profiles specific to their tubular products. Customizable inspection profiles enable stakeholders to define the required tests, measurements, and criteria for each type of tubular product. By tailoring inspection profiles to their unique needs, stakeholders can ensure adherence to industry standards and regulatory requirements, ultimately guaranteeing the quality and safety of their tubular assets. Seamless Integration of Inspection Data: PipeDNA offers seamless integration of inspection data, eliminating the need for manual data entry and reducing the risk of human errors. The platform allows for the integration of manufacturing data, ensuring that inspection results are directly linked to the production process. By automating the transfer of data, PipeDNA enables stakeholders to maintain accurate and reliable records, enhancing traceability and facilitating data-driven decision-making. Enhanced Identification and Traceability: PipeDNA's identification and traceability features provide stakeholders with quick and accurate pipe identification, detailed pipe information, activity history, and traceability documentation. By integrating popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables seamless identification and tracking of each tubular product. This enhanced traceability minimizes the risk of errors, supports efficient recalls if necessary, and ensures compliance with industry regulations. Leveraging Emerging Technologies: PipeDNA leverages today's emerging technologies to optimize tubular inspection management. The platform supports barcoding and labeling systems, integrating popular barcode standards for efficient identification and tracking. PipeDNA is RFID ready, allowing for integration with RFID technologies such as labels and asset tags, further enhancing asset tracking and traceability. Additionally, PipeDNA supports IoT data integrations using the MQTT standard, enabling fast and reliable sensor data integration for enhanced inspection processes. PipeDNA revolutionizes tubular inspection management in the oil and gas industry, providing a smart cloud-based platform that streamlines quality assurance processes. By offering efficient management of inspection jobs, real-time status updates, tailored inspection profiles, seamless data integration, and enhanced identification and traceability, PipeDNA empowers stakeholders to ensure the highest level of quality and compliance in their tubular assets. Embrace PipeDNA and elevate your tubular inspection management to new levels of efficiency and reliability.
Service
Currently in Use
Service
New
API
Air Freight
Nulux Networks en Edmonton
Amplifying Control Room Capabilities through Robust Wireless Links by Nulux Network Solutions In the thriving pulse of the oil and gas industry, where operational precision and data integrity are pivotal, control rooms emerge as the neural centers orchestrating myriad operations with absolute finesse. At Nulux Network Solutions, we understand the paramount importance of seamless, secure, and robust communication for control rooms, ensuring that your operational harmony remains undisturbed amidst the cacophony of challenges posed by distance, terrain, and environmental factors. Nulux’s Control Room Wireless Links – Ensuring Uninterrupted Operative Symphonies Navigating through the technological and operational challenges, Nulux’s Control Room Wireless Links ensure that your data – the critical nerve of decision-making processes – travels seamlessly across the challenging terrains and distances, bridging your control room with the various operational nodes dispersed across diverse geographic locales. Wireless Connectivity – The Nulux Difference Our wireless solutions are meticulously crafted, ensuring: Seamless Connectivity: Bridging the communication gaps through point-to-point and multipoint configurations, tailored to meet your unique operational dynamics and challenges. Enhanced Reliability: With proven expertise in implementing robust wireless systems, we ensure that your control room is always in sync with the on-field operations, mitigating downtimes and enhancing decision-making processes. Optimized Cost-Effectiveness: Deploying wireless links that negate the need for extensive hardwired infrastructures, thereby ensuring that your operational efficiencies are not burdened by exorbitant capital expenditures. Intricate Comprehension of Wireless Technologies At Nulux, we prioritize understanding the subtle nuances and stark distinctions in wireless technologies, ensuring that your control room wireless links are not just communicatively optimal but are also operationally coherent. Point-to-Point Networks: Ensuring a dedicated, secure, and high-capacity data transmission channel between your control room and a fixed operational point. Multipoint Configurations: Crafting a network where the control room can communicate with multiple operational points through a single, secure, and reliable wireless channel. Safeguarding Your Data with Nulux In a world where data integrity and security are not mere necessities but vital operational prerequisites, our Control Room Wireless Links are fortified with robust security protocols, ensuring that your operational data is shielded from potential cyber threats, thereby facilitating a secure, reliable, and efficient operative environment. Engage with Operational Excellence Embark on a journey towards enhanced operational efficiencies with Nulux, where your control room is not just a strategic point but is the dynamic conductor of an orchestrated operational symphony. Our wireless links ensure that every note, every data point, is communicated, analyzed, and acted upon with absolute precision, ensuring that your operations resonate with reliability, efficiency, and absolute excellence. Unleash the true potential of your control room, ensuring that every decision, every action is backed by real-time data, secured communication, and the robust reliability of Nulux’s Control Room Wireless Links. Let’s sculpt an operational future where your decisions echo across the vast expanses of your operations, where your actions are timely, and where your control room truly controls, manages, and orchestrates your operational symphony with unmatched precision and reliability. Navigate with Nulux, where your pathways are not just connected but are securely, reliably, and efficiently interlinked.
Service
In Stock
Service
New
ISO
Marlin Oil Tools en Calgary
Introducing the SBP Solvable Bridge Plug from Marlin Oil Tools: A Revolutionary Approach to Temporary Well Barrier Solutions Marlin Oil Tools is proud to unveil the SBP Solvable Bridge Plug, an innovative downhole tool designed for the efficient and environmentally friendly isolation of oil and gas wells. Engineered with state-of-the-art materials that fully dissolve in downhole conditions, the SBP offers a temporary barrier solution that simplifies well intervention processes and enhances operational efficiency. Key Features of the SBP Solvable Bridge Plug: Eco-Friendly Dissolution: Designed to completely dissolve over time, the SBP eliminates the need for mechanical removal, reducing environmental impact and operational costs. Efficient Well Isolation: The plug is set using a hydraulic Setting Tool (STT), ensuring a quick and secure installation to create a reliable temporary barrier and isolate underlying intervals. Fully Soluble Materials: Constructed from entirely soluble materials for both collets and the sealing element, ensuring that the plug will fully disintegrate without leaving residue. Field-Proven Reliability: The effectiveness and reliability of the SBP Solvable Bridge Plug have been rigorously tested and confirmed through extensive field work, offering peace of mind in its performance. Optimized for Oil and Gas Wells: Specifically tailored for use in oil and gas wells, the SBP is an ideal solution for operators seeking to enhance well management and operational flexibility. Streamlined Operations: By dissolving directly in the well, the SBP streamlines the workflow, eliminating the need for follow-up interventions for plug removal. Maximize your operational efficiency and environmental stewardship with the SBP Solvable Bridge Plug from Marlin Oil Tools, a leading-edge solution engineered for temporary well isolation in the oil and gas industry. Utilizing fully soluble materials that dissolve in downhole conditions, the SBP offers a reliable, cost-effective, and eco-friendly alternative to traditional bridge plugs. Set with a hydraulic Setting Tool (STT), this plug is designed to create an effective barrier and then dissolve, simplifying well interventions and eliminating the need for mechanical removal. Choose the SBP Solvable Bridge Plug for its field-proven reliability, operational efficiency, and commitment to environmental sustainability. Why Choose the SBP Solvable Bridge Plug from Marlin Oil Tools? Sustainable Well Management: Provides an environmentally friendly solution that reduces the ecological footprint of well operations. Cost-Effective Operations: Eliminates the expense and time associated with traditional plug removal, enhancing operational efficiency. Reliable Temporary Isolation: Ensures secure and effective temporary well isolation, supporting a wide range of intervention tasks. Proven in Field Applications: Backed by rigorous field testing, the SBP offers reliability and peace of mind for operators. The SBP Solvable Bridge Plug by Marlin Oil Tools represents the cutting edge in downhole tool technology, providing oil and gas operators with a smart, sustainable, and efficient solution for well isolation. Incorporate the SBP into your operations to benefit from its innovative design, operational excellence, and environmental benefits.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Midastream Supply Company en Airdrie
Bearings are "parts that assist objects' rotation". They support the shaft that rotates inside the machinery. Machines that use bearings include automobiles, airplanes, electric generators and so on.
Buy
Made to Order
Product
New
ISO
Sea Freight
Poseidon Robotics en Chandler
Introducing Poseidon Robotics' Large Aluminum Jaws: Elevating Subsea Search and Rescue Operations Poseidon Robotics, a leading name in subsea robotics and ROV solutions, is proud to announce the launch of our latest innovation: the Large Aluminum Jaws. Designed to enhance the performance of the renowned Blue Robotics Newton Subsea Gripper, these jaws are set to revolutionize search and rescue (SAR) applications and beyond. A Collaborative Breakthrough At Poseidon Robotics, collaboration and customer-centricity lie at the core of our values. We have worked closely with our esteemed partners at Blue Link and engaged with several SAR customers to develop the Large Aluminum Jaws. This joint effort ensures that our product aligns perfectly with the unique needs and challenges faced by search and rescue operators in subsea environments. Engineered for Performance The Large Aluminum Jaws have been meticulously engineered to deliver superior performance in grabbing larger objects underwater. Comparing our Aluminum model to the standard jaws, it becomes evident that we have achieved the perfect balance between strength, precision, and functionality. Precision and Durability Crafted from premium quality Aluminum (6061-T6), our jaws boast exceptional strength and durability. The hard anodized black finish further enhances their resilience, making them resilient to the harsh conditions of subsea operations. Precision flanged bushings ensure smooth and reliable operation, enabling operators to accomplish their tasks with confidence. Versatility Redefined While the Large Aluminum Jaws are designed primarily with search and rescue applications in mind, their versatility extends to various other tasks in subsea environments. Whether it's retrieving objects from the depths or handling delicate operations, these jaws offer unmatched adaptability and efficiency. Your Partner in Subsea Excellence When you choose Poseidon Robotics' Large Aluminum Jaws, you partner with a team dedicated to excellence and customer success. Our commitment to providing the highest quality products is matched only by our dedication to unparalleled customer support. We are here to ensure that you make the most of your subsea operations with our cutting-edge solutions. Experience the Future of Subsea Grabbing Unlock a new era of efficiency and precision in search and rescue operations with Poseidon Robotics' Large Aluminum Jaws. Whether you are a SAR professional or involved in other subsea applications, these jaws will elevate your performance to new heights. Contact Us Today Contact Poseidon Robotics today to learn more about our Large Aluminum Jaws and explore how they can transform your subsea operations. Our team of experts is ready to assist you every step of the way. Embrace the future of subsea robotics with Poseidon Robotics!
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Energy Distribution Management
Software DevelopmentEleks en Toronto
ELEKS: Powering the Future of Efficient Energy Distribution Management Harness the power of technology to revolutionize energy distribution management with ELEKS. Our expertise in energy software development brings stability, accessibility, cleanliness, and sustainability to your consumers while ensuring the resilience of your networks against challenges and threats. As a leading energy software company, we're at the forefront of developing and integrating Custom Distribution Management Systems (ADMS) that empower utility suppliers to meet customer demands for power quality, reliability, and data security. Elevate Your Energy Management with ELEKS Energy Software Development: Embrace the future of energy management with our advanced software solutions. Dramatically enhance productivity, accessibility, safety, and sustainability in your business power system. Join the ranks of forward-thinkers who are leveraging technology to redefine the energy landscape. Empowering Energy Producers and Distributors: Customized Solutions for You: As a seasoned custom software development company, ELEKS has been empowering energy producers, distributors, smart city developers, and governmental organizations for three decades. Our expertise lies in crafting tailored data-driven software solutions and energy management systems that leverage cutting-edge technologies such as Cloud, IoT, blockchain, and drones. Unveiling the Future of Energy Management: Understanding Your Needs: We comprehend the intricacies of the energy and utility industry – from modern power management solutions for diverse sources to facilities and businesses. Our journey has been marked by refining our understanding of unique industry challenges and leveraging technology to develop innovative solutions. Why Choose ELEKS? Experience That Matters: With a legacy spanning thirty years, ELEKS brings a wealth of experience to the table. Our team of experts is well-versed in addressing complex energy management challenges. Cutting-Edge Technologies: Our energy software development solutions are fueled by the latest technologies, including Cloud, IoT, blockchain, and more. Stay ahead of the curve and embrace the future with confidence. Empower Efficiency and Sustainability: Energy efficiency and sustainability aren't just buzzwords – they're critical factors in a changing world. ELEKS' solutions empower you to meet these demands head-on. Join the Energy Revolution with ELEKS Revolutionize the energy distribution landscape and empower efficient energy management with ELEKS. Our energy software development solutions are designed to catapult your business into a future of resilience, reliability, and sustainability. Embrace innovation – choose ELEKS to lead the way into a brighter, greener future.
Service
In Stock
Service
New
ISO
Eleks en Toronto
ELEKS: Crafting Excellence through Innovative Product and Service Design In the fast-paced world of technology and business, innovation is the key to staying ahead. At ELEKS, we're more than just a software engineering company – we're your partners in innovation. Our Product and Service Design offerings are your gateway to creating exceptional domain-specific technology solutions that resonate with your brand's vision and scale. Bringing Your Visions to Life: We're here to turn your business ideas into reality. With a deep focus on understanding your users' needs, we help you design and validate disruptive concepts that resonate with the market. Our seasoned experts collaborate with you to define your value proposition and chart an actionable roadmap to success. Revitalize Existing Offerings: Are users leaving your products untouched? Our services extend to reimagining your current offerings for growth. We identify revenue streams within your existing products, coupled with enhancing the efficiency of legacy systems, to rejuvenate your market presence. Smart, Forward-Looking Decisions: Navigating uncertainty requires foresight. Our team of experts guides you in creating sustainable, industry-leading product strategies. Whether you're steering a new product or aligning short-term goals with a visionary outlook, we're here to help you stay ahead of the curve. Testing Bold Business Concepts: Entering a new market or amplifying your presence? Our team delves deep into your business goals, market dynamics, and technological horizons. Armed with this analysis, we craft service concepts that align with your needs and are backed by technology-proven solutions. Accelerate Time-to-Market: Your success is our mission. Our product design service accelerates your journey from concept to market. Startups secure investment, and enterprises streamline delivery processes, all while validating ideas through prototyping and testing. Enhance Customer Experience: Transition from mere communication to complete immersion. We identify gaps in your customer experience and develop actionable plans for a service proposition that captivates, engages, and leaves a lasting impression. Unlock the ELEKS Advantage: Experience counts. Since 2009, our design and technology consulting team has propelled visionary entrepreneurs and product leaders forward. We empower you to transform groundbreaking ideas into tangible customer value. Top Ten Benefits of ELEKS' Product and Service Design Services: 1. Breakthrough Ideation: Transform ideas into game-changing concepts backed by user insights. 2. Enhanced Engagement: Create customer-centric strategies through behavioral science. 3. Strategic Roadmapping: Chart a comprehensive product strategy with clear priorities. 4. Winning Business Models: Validate models for competitive advantages and market fit. 5. Technological Excellence: Design products that optimize performance and scalability. 6. Deep User Insights: Understand customers through qualitative and quantitative research. 7. Inclusivity Assessment: Extend reach by crafting products inclusive to diverse needs. 8. Innovative Workshops: Unleash potential through tailored Innovation Workshops™. 9. Streamlined Experience: Identify bottlenecks and unlock new opportunities. 10. Expert Product Strategy: Implement scalable solutions with comprehensive guidance. ELEKS is your conduit to design and innovation, committed to transforming your ideas into impactful reality. From envisioning concepts to realizing industry-leading solutions, we are your steadfast partners in innovation. With ELEKS, your aspirations find a partner dedicated to propelling them into the future. Welcome to the realm of design and innovation – welcome to ELEKS.
Service
Made to Order
Service
New
ISO
Midastream Supply Company en Airdrie
The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.
Buy
In Stock
Product
New
API
Air Freight
CWB National Leasing en Winnipeg
Accelerate Your Construction Projects with Excavator Leasing from CWB National Leasing Enhance Your Operational Efficiency and Financial Flexibility In the dynamic world of construction, having access to advanced equipment like excavators is key to staying competitive and efficient. Leasing your excavator through Canadian Western Bank (CWB) National Leasing offers a versatile and financially astute solution that aligns with your project needs and budget. Here’s how leasing an excavator can be a game-changer for your construction business: 1. Swift Equipment Delivery CWB National Leasing prioritizes speed and efficiency. They review your application promptly and typically notify your equipment dealer about the payment within 48 hours of approval. This rapid process means your excavator can be delivered and operational in no time, keeping your projects on track. 2. Boosted Purchasing Power With CWB National Leasing, you can enhance your financial leverage. Opt for manageable periodic payments instead of a large upfront cost, freeing up capital for other critical business needs. Plus, the flexibility to add extra features or accessories to your excavator with a minor increase in payments further enhances its utility and efficiency. 3. Balanced Cash Flow Management Leasing an excavator allows for smaller payments over the term of the lease, enabling the equipment to start generating revenue while you're still paying for it. This approach helps maintain a favorable balance between your expenses and income. 4. Adaptable Payment Plans CWB National Leasing offers tailor-made payment options, including seasonal, semi-annual, or annual plans, to align with your business's cash flow. This adaptability is especially crucial in the construction industry, where income can vary based on project timelines. 5. Potential Tax Advantages Leasing can offer significant tax benefits, such as allowing you to expense lease payments rather than capitalizing the cost of the excavator. It's advisable to consult with a tax advisor to understand how leasing can improve your business’s tax position. Conclusion Opting to lease an excavator through CWB National Leasing is a strategic decision that empowers your construction business with the right tools while maintaining financial agility. It enables you to deploy state-of-the-art excavators in your projects while managing your finances effectively, paving the way for enhanced efficiency, growth, and profitability in the competitive construction market.
Service
In Stock
Service
New
ISO
Currency Management in Foreign Lands
Personal FX ServicesDunbridge Financial en Oakville
Unlock Local Currency Access Anywhere with Dunbridge Financial's Personal Services Imagine traveling to a new country and seamlessly accessing the local currency as if you already had a local bank account. With Dunbridge Financial's Personal Services, this dream becomes a reality. We understand the importance of having local currency at your fingertips when you need it, and our innovative solutions are designed to make your financial experiences hassle-free and empowering. Access Local Currency Anywhere You Go Traveling to a new country is an adventure, but managing your finances in a foreign land can be a challenge. At Dunbridge Financial, we believe that you should have the freedom to access local currency effortlessly. Our Personal Services provide you with the tools you need to make your travel experiences smooth and enjoyable. Personal Services for Your Peace of Mind At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial needs. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is at the heart of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is paramount to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Empower Your Financial Freedom Don't let financial limitations hinder your travel experiences. Join Dunbridge Financial today and experience a world of ease, convenience, and security. Whether you need local currency while traveling or making international money transfers, we are here to make your financial journey a breeze. Empower your financial freedom with Dunbridge Financial. Sign up now and unlock a seamless, worry-free financial experience. Access local currency anywhere you go and embrace a world of limitless possibilities.
Service
Made to Order
Service
New
ISO
Air Freight
Midastream Supply Company en Airdrie
The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.
Buy
In Stock
E&P
New
API
Air Freight
Provix en New Lowell
Enhance Your Vision with the Wisdom Diffuser Lens #1 – Available Now at Provix Provix is excited to introduce the Wisdom Diffuser Lens #1 (model NWI-WLOA-LENS1), a specialized accessory designed to enhance the functionality of your cap light. Ideal for mining, construction, and other industries where clear, wide-range vision is essential, this diffuser lens is a must-have addition to your equipment. Optimized Lighting for Various Environments The Diffuser Lens #1 is expertly designed to fit Cap Light models 2, 3, and 4. It spreads light over a wide area, providing a soft, diffused beam that is perfect for illuminating large spaces without the harshness of direct light. This feature is especially beneficial in environments where clear, broad visibility is crucial for safety and precision. Versatile and Easy to Attach This lens is incredibly easy to attach and use. It seamlessly fits onto your existing Wisdom cap lights, transforming the beam into a more diffused and wide-ranging light. This versatility makes it an excellent tool for various professional and recreational activities, including mining, construction, outdoor adventures, and emergency response. Durable and Reliable Like all Wisdom products, the Diffuser Lens #1 is built to last. Its durable construction ensures it can withstand the rigors of tough working conditions, providing reliable performance time and time again. A Must-Have for Enhanced Visibility Whether you're working underground or in low-light conditions, the Wisdom Diffuser Lens #1 enhances your visibility, making your tasks easier and safer. It's an essential accessory for anyone who relies on cap lights for their work. Get Your Wisdom Diffuser Lens #1 Today Upgrade your cap light with the Wisdom Diffuser Lens #1 from Provix. Visit our website at www.provix.net to discover more about this unique product and explore our wide range of mining equipment designed to enhance your work experience.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Marlin Oil Tools en Calgary
Introducing the MGN Radial Downhole Magnet from Marlin Oil Tools: Your Premier Solution for Well Cleaning and Metal Debris Removal Marlin Oil Tools is proud to unveil the MGN Radial Downhole Magnet, a highly efficient downhole tool designed specifically for the oil and gas industry to address the critical need for well cleaning and maintenance. Engineered to remove small metal debris, such as chips and scale, the MGN Radial Downhole Magnet is essential for maintaining well integrity and preventing operational complications. Key Features of the MGN Radial Downhole Magnet: Efficient Debris Removal: Utilizes a powerful radial magnetic field to capture and remove small metal debris accumulated during the operation of metal tools and milling operations. Prevention of Operational Complications: By extracting small metal parts and foreign objects, the MGN Radial Downhole Magnet minimizes the risk of well complications or accidents, ensuring smoother operations. Versatile Design: Features various designs with magnetic surfaces located along the tool body or from the end, tailored to maximize debris capture efficiency. Simultaneous Well Flushing Capability: Equipped with an internal passage hole, it allows for well flushing simultaneously with magnet operation, enhancing cleaning efficiency. Customizable Connections: Offers the flexibility to manufacture any connecting threads as per customer requirements, ensuring compatibility with existing downhole tool configurations. Crucial for Well Preparation: Acts as a vital step in well work preparation, ensuring a clean operational environment free from hazardous metal debris. Elevate your well maintenance regime with the MGN Radial Downhole Magnet from Marlin Oil Tools, a leading-edge solution crafted for the effective removal of metal debris in oil and gas wells. This downhole magnet, engineered for precision and efficiency, safeguards your well operations against potential complications caused by foreign metal objects and accumulated debris. With its versatile design and simultaneous well flushing capability, the MGN Radial Downhole Magnet is indispensable for any well intervention or maintenance activity. Opt for Marlin Oil Tools’ customizable and reliable downhole magnet to ensure your well remains clean, safe, and productive. Why Choose the MGN Radial Downhole Magnet from Marlin Oil Tools? Targeted Debris Removal: Optimized for capturing a wide range of metal debris, ensuring a clean wellbore. Operational Safety: Significantly reduces the risk of well operation complications and accidents. Enhanced Cleaning Efficiency: Simultaneous flushing feature streamlines well cleaning processes. Flexible and Compatible: Customizable thread options offer seamless integration into your BHA. Essential for Well Maintenance: A critical tool for preparing wells for intervention and maximizing operational longevity. The MGN Radial Downhole Magnet by Marlin Oil Tools represents the pinnacle of downhole cleaning technology, providing operators with a robust tool for ensuring well integrity and operational efficiency. Incorporate the MGN Radial Downhole Magnet into your well maintenance toolkit for a cleaner, safer, and more productive well operation.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Midastream Supply Company en Airdrie
The WL™packer is a new wireline-set, retrievable, high-performance production packer, run in combination with the L-10 on/off tool. The WL can be run as a temporary bridge plug by installing a blanking plug in the L-10 seal nipple, above the packer. This enables remedial or stimulation work above the packer. The plug can then be removed with conventional wireline methods, allowing production of the well to be resumed.
Buy
Made to Order
Product
New
API
Sea Freight
Mensaje:
Para: proveedor
Mekapisk EnviroBlu Solutions Inc. en St. John’s
Revolutionizing Industrial Cleaning with the 205-Litre EnviroBlu Barrel In the relentless pursuit of efficiency and sustainability, we at Mekapisk EnviroBlu Solutions Inc. have engineered a game-changing solution for industrial cleaning. Introducing the 205-litre barrel of EnviroBlu cleaner—an innovation designed to tackle the toughest cleaning challenges in the oil and gas industry, transportation, and beyond. Imagine a world where your rigs, trucks, and heavy equipment are impeccably clean, operating at peak performance, and you save time and money in the process. This is not just a vision; this is the reality with EnviroBlu. The Future of Industrial Cleaning At EnviroBlu, we are committed to providing the best environmentally safe cleaning and degreasing products available in the market today. Our 205-litre barrel of cleaner embodies this commitment with a water-based, non-toxic, phosphate-free formula that ensures fast and reliable cleaning results without harming the environment. This isn't just a cleaner; it's a leap forward in industrial maintenance technology. Unmatched Efficiency Time is money, and nowhere is this more true than in the industrial sector. Traditional cleaning methods are labor-intensive and time-consuming, often involving harsh chemicals that pose risks to both workers and the environment. EnviroBlu changes the game with its advanced aqueous surfactant technology. This formula penetrates dirt and grime at the molecular level, ensuring a thorough clean with minimal effort. The result? Faster cleaning times, less labor, and significant cost savings. Imagine reducing your cleaning downtime by half. Imagine your equipment not only looking pristine but also operating more efficiently because it's free from the grime that causes wear and tear. With EnviroBlu, this is not just possible; it's guaranteed. Cost-Effective Solutions Let's talk numbers. The 205-litre barrel of EnviroBlu is designed for large-scale cleaning operations, making it the ideal choice for rigs, trucks, and heavy machinery. By switching to EnviroBlu, you're not just choosing a superior cleaning product; you're making a smart financial decision. 1. Reduced Labor Costs: With EnviroBlu’s powerful cleaning action, the time required for each cleaning operation is drastically reduced. Less time spent cleaning means lower labor costs and more time focused on core operations. 2. Lower Product Usage: Our formula is highly effective, meaning you use less product to achieve the same—if not better—results. This translates to fewer purchases and lower overheads. 3. Extended Equipment Life: Clean equipment runs more efficiently and lasts longer. By removing the dirt and grime that cause wear and tear, EnviroBlu helps extend the lifespan of your machinery, reducing the need for costly repairs and replacements. Sustainability at Its Core We are living in a time where environmental responsibility is not just a choice but a necessity. EnviroBlu’s water-based, non-toxic, and phosphate-free formula is safe for both people and the planet. By choosing EnviroBlu, you are making a powerful statement about your commitment to sustainability. Our product is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner, adhering to the highest environmental standards. Versatile Application The 205-litre barrel of EnviroBlu is not just for the oil and gas industry. Its versatility makes it suitable for a wide range of applications: • Rigs: Keep your drilling rigs in top condition with EnviroBlu’s powerful cleaning capabilities. Whether it’s the deck, the derrick, or the living quarters, EnviroBlu ensures a clean and safe environment. • Trucks: From transport trucks to service vehicles, EnviroBlu makes light work of heavy-duty cleaning. Ensure your fleet is always road-ready and looking its best. • Heavy Equipment: Cranes, bulldozers, excavators—no matter the equipment, EnviroBlu provides the cleaning power needed to keep them operating at peak efficiency. Join the Cleaning Revolution At Mekapisk EnviroBlu Solutions Inc., we believe in pushing the boundaries of what’s possible. Our 205-litre barrel of EnviroBlu cleaner is a testament to that belief. It’s more than just a product; it’s a revolution in industrial cleaning. Save time, save money, and save the planet—this is the EnviroBlu promise. Stay Green, Go Blu!
Buy
In Stock
Manufacturer
New
ISO
Land Freight
CSA 60 unit, non-Locking, FAST charger rack
Miner's Cap Lamp Charging StationProvix en New Lowell
Boost Your Equipment’s Readiness with the CSA 60 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to introduce the CSA 60 Unit Non-Locking FAST Charger Rack (model NWI-NWCR-60BC-SSI), a high-capacity, single-sided charging solution designed for the fast-paced needs of modern mining and industrial operations. This charger rack is engineered to keep your Wisdom lighting equipment fully charged and ready for any task. Rapid Charging for Maximum Efficiency The CSA charger rack is optimized for the WISE LITE2, LAMP3A, and 4A models, offering an impressive charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This quick turnaround is essential for minimizing downtime and ensuring your team's equipment is always operational. High-Capacity Charging Solution With the ability to charge up to 60 units simultaneously, this charger rack is perfect for large-scale operations. Its single-sided design is space-efficient, making it an ideal fit for equipment rooms, charging stations, or any workspace where space is at a premium. Designed for Convenience and Accessibility The non-locking feature of the CSA 60 Unit Charger Rack provides easy and quick access to all charging ports, facilitating efficient management of multiple devices. This accessibility is particularly beneficial in fast-paced work environments where time is critical. Durable and Reliable Construction Built to withstand the demanding conditions of mining and industrial environments, the CSA charger rack is both durable and reliable. Its sturdy construction ensures long-lasting performance, making it a valuable investment for any operation. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and rental equipment providers who need to charge a large number of devices efficiently and reliably. Its high capacity and fast charging capabilities make it an indispensable tool for large teams. Elevate Your Charging Capabilities Today The Wisdom CSA 60 Unit Non-Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to discover more about this efficient and practical charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
NE Safety Valve, Surface Controlled 4-1/2 inch
SCSSSVMidastream Supply Company en Airdrie
The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
ALCiT en Mississauga
Unlock Data Protection Excellence with ALCiT's Veeam Partnership In the ever-evolving landscape of data protection, one name reigns supreme: Veeam. Over the past decade, Veeam has transcended from a niche player to a dominant force in the realm of backup solutions. However, at ALCiT, we understand that backups are only half the story – it's the restores that truly matter. What good is a backup if you can't restore it swiftly and flawlessly? Veeam: The Vanguard of Restoration Veeam's journey is one of evolution and innovation. From being a niche contender to becoming the go-to for backup solutions, Veeam has become synonymous with data protection. At ALCiT, we proudly unite with Veeam, focusing on what truly matters – seamless, rapid restoration. ALCiT and Veeam: Fortifying Your Data Assets Backup as a Service (BaaS): With ALCiT, you can now breathe easy. Tell us your restoration needs, and we'll handle the rest – from hardware to software and vigilant monitoring. Your peace of mind is our mission. CloudBackup Redefined: Data security knows no bounds. ALCiT's partnership with Veeam extends to safeguarding your data off-site, in a secure Canadian datacenter. Your data's sanctuary is our promise. Office 365: Protecting What Matters: Microsoft's service agreement might not cover data protection, but ALCiT does. Don't gamble with your data – our Office 365 backup solution ensures your valuable information is never compromised. Disaster Recovery as a Service (DRaaS): In the realm of data protection, disaster recovery is a cornerstone. ALCiT's DRaaS complements our BaaS offering, ensuring that your data remains resilient even in the face of adversity. Guardian of Your Data's Destiny Your data's protection and restoration are not just tasks; they're our commitment. With ALCiT's Veeam partnership, experience data protection that transcends uncertainty and empowers your digital future. Secure Your Data's Future Today ALCiT's partnership with Veeam isn't just a collaboration; it's a commitment to your data's integrity.
Service
Made to Order
Service
New
ISO
Hydraulic hoses for industrial equipment applications
Hydraulic HoseGrid Dirt Construction en Red Deer
Just like a hose you might use to water your garden, the purpose of a hydraulic hose is to allow fluid to flow from one component to another – in this case hydraulic fluid. The hose is the conduit that ensures the fluid is able to travel unimpeded and it's a vital part of keeping hydraulics systems moving. A hydraulic hose is used anywhere in a hydraulic system requiring a flexible connection between two fluid ports. A hydraulic hose is a synthetic rubber tube surrounded by some sort of flexible strength enhancing winding, such as metal or fiber, and then covered in another rubber carcass. Flow velocity is determined by both the hydraulic pump's flow rate and the hydraulic hose size. Changing the flow rate of the hydraulic pump but leaving the hydraulic hose size the same will affect flow velocity. Standard high pressure hydraulic hose 1SN can in -40°C to +100°C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar.
Buy
In Stock
Product
New
ANSI
Sea Freight
CWB National Leasing en Winnipeg
Enhance Your Automotive or Manufacturing Business with Paint Booth Leasing from CWB National Leasing Boosting Quality and Efficiency in Your Painting Operations For businesses in the automotive, manufacturing, or furniture sectors, a high-quality paint booth is critical for ensuring top-notch painting and finishing. Leasing paint booths through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and efficient solution for your painting needs. Here’s how leasing paint booths can significantly benefit your business: 1. Fast Access to Advanced Equipment CWB National Leasing understands the importance of having the right equipment promptly. They offer a quick leasing process, typically making decisions within 48 hours of your application. This rapid turnaround means your paint booths can be delivered and operational quickly, enhancing the quality and efficiency of your painting processes. 2. Increased Purchasing Power Leasing paint booths with CWB National Leasing allows you to leverage your financial resources more effectively. By opting for periodic payments over a significant initial purchase, you free up capital for other crucial aspects of your business. The option to add extra features or accessories to your paint booths for a small payment increase also allows for customization to meet specific operational needs. 3. Effective Cash Flow Management Smaller lease payments over the term mean your paint booths start contributing to your business’s revenue while still being paid off. This approach helps maintain a balanced expense-to-revenue ratio, crucial for the financial health and growth of your business. 4. Flexible Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s revenue cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Advantages Leasing paint booths can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Choosing to lease paint booths through CWB National Leasing is a strategic move that equips your business with essential equipment while maintaining financial agility. It ensures access to state-of-the-art paint booths, vital for delivering high-quality finishes, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved product quality, and increased profitability, helping your business to excel in the competitive automotive or manufacturing market.
Service
In Stock
Service
New
ISO
Circulating Type Chokes for Nipples
Downhole ToolsHoca Oil Tools en Zwartemeer
HOCA Oil Tools: Mastering Flow Control with Circulating Type Chokes for Nipples In the specialized field of downhole operations, mastering the control of fluid flow within the wellbore is critical for operational success and efficiency. HOCA Oil Tools is at the forefront of this challenge, offering advanced solutions with our Circulating Type Chokes for Nipples. Designed to integrate seamlessly with landing nipples in the wellbore, these tools are essential for precise flow control and well management during various downhole activities. HOCA’s Circulating Type Chokes for Nipples: Precision Engineered for Optimal Flow Control Our Circulating Type Chokes for Nipples are designed for operators seeking to maintain precise control over fluid flow in their downhole operations. Whether for circulation, testing, or intervention tasks, our chokes provide the versatility and reliability needed in today’s diverse well environments. Constructed with the highest quality materials and engineered to withstand harsh downhole conditions, HOCA’s chokes ensure optimal performance and durability. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Circulating Type Chokes for Nipples means opting for a solution that embodies innovation, quality, and operational excellence. Our commitment to providing cutting-edge downhole solutions ensures that our products meet the complex demands of modern oil and gas operations, delivering performance that exceeds expectations. Incorporating our Circulating Type Chokes into your downhole toolkit signifies a step toward enhanced operational control, efficiency, and safety. With HOCA Oil Tools, you gain not just a supplier but a dedicated partner committed to supporting your downhole challenges with advanced solutions and expert service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Chokes for Nipples. Partner with us, and elevate your downhole flow control to new levels of precision and reliability. With HOCA Oil Tools, enhance your downhole operations with tools that redefine efficiency, safety, and performance in the demanding oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
Long Stroke Hydraulic Pumping Unit
XL Hydraulic Pumping UnitSivam S.p.A. en Spoltore
In the last few years, thanks to intense engineering studies, Sivam has designed and manufactured the Long Stroke Hydraulic Pumping Unit to maximize the efficient recovery of oil from wells completed with sucker rods. One of the main advantages of the Long Stroke Hydraulic Pumping Unit compared to a conventional Beam Pump is the longer stroke length results in less pump cycles per barrel resulting in higher pump efficiency and less wear and tear on the downhole components. Installation of the Long Stroke Hydraulic Pumping Unit is quick and simple. Installation averages just 3 hours and civil work is not required. The light weight of the unit (under 3 tonnes) and small footprint (it is mounted on the X-mas Tree) provides a artificial lift pumping unit that can be used in well testing or offshore platform applications (dual barrier policy can be achieved when used in conjunction with our rod sentinel SCSSSV).
Buy
In Stock
Manufacturer
New
API
Air Freight
Water Injection Well Flow Control Valve 4.31 inch
WI Safety ValveMidastream Supply Company en Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Currency Management of Foreign Investments
Foreign Exchange For Investment PropertyDunbridge Financial en Oakville
Unlock Financial Freedom with Dunbridge Financial's Personal Services Are you tired of hidden fees and complicated financial services that leave you feeling overwhelmed and uncertain about your money? Look no further! Dunbridge Financial is here to revolutionize the way you manage your personal finances. With our commitment to live rates, uncompromising security, and ease of use, we are your gateway to financial freedom. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. What you see is what you get - no hidden fees, no surprises. Access our live exchange rates and take control of your money like never before. With us, you can rest assured that you're getting the most value out of every transaction. Security Is Our Priority Your financial well-being is of utmost importance to us. With Dunbridge Financial, your funds and data are in safe hands. We partner with payment service providers compliant with ISO27001, ensuring that your client funds are managed securely and with the utmost care. Enjoy peace of mind knowing that your financial interests are protected. Easy to Use, Easy to Save We believe that managing your money should be a breeze. That's why our personal financial service is designed with simplicity in mind. Sending money to over 100 countries is quick and effortless. Just choose your destination, lock in your rate, and you're done - it's as easy as that. Foreign Investment Management - Your Gateway to Global Opportunities At Dunbridge Financial, we go beyond simple money transfers. We offer a wide range of foreign investment management options, catering to your diverse financial needs. Here's how we can help you unlock global opportunities: 1. Manage Investments from Abroad: Handle your investments in your home country, even when you're residing abroad. Our platform empowers you to stay connected and make informed investment decisions regardless of your location. 2. Explore Offshore Investments: Diversify your investment portfolio with offshore opportunities. Our secure and compliant processes ensure that your international currencies are managed efficiently and effectively. 3. Pay Your Mortgage Abroad: Dreaming of a vacation villa or an investment property in another country? Dunbridge Financial makes it hassle-free to pay your mortgage in a different currency, turning your aspirations into reality. 4. Flexible Payment Options: Enjoy the flexibility of having your pay and expenses paid in your preferred currency. No more worries about currency fluctuations affecting your financial plans. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider. We are your trusted partner, dedicated to simplifying your financial journey and maximizing your opportunities. With us, you'll experience: • Cutting-edge technology for seamless financial transactions • Personalized support from our expert team, ensuring your needs are met • Secure and compliant processes for your peace of mind Join Us Today and Embrace Financial Freedom Discover the power of transparent, secure, and efficient financial services with Dunbridge Financial. Take control of your personal finances, explore global investment opportunities, and embrace a world of possibilities. Whether you're managing investments from abroad or making international money transfers, we are your reliable partner every step of the way. Unlock your financial freedom with Dunbridge Financial. Sign up today and experience a new era of financial empowerment.
Service
Made to Order
Service
New
ISO
Air Freight
CWB National Leasing en Winnipeg
Transform Your Workspace with Furniture Leasing from CWB National Leasing Elevating Your Business Environment with Stylish and Flexible Furnishing Solutions Creating a functional and aesthetically pleasing workspace is crucial for any business, whether it's a startup, a growing company, or an established corporation. Leasing furniture through Canadian Western Bank (CWB) National Leasing provides a flexible, cost-effective, and convenient solution for businesses looking to enhance their workspace. Here’s how leasing furniture can benefit your business: 1. Quick Access to Contemporary Office Furniture CWB National Leasing values the importance of a well-furnished workspace in boosting productivity and morale. They offer a fast leasing process, with decisions typically made within 48 hours of application submission. This ensures that your furniture can be delivered and set up quickly, transforming your office space without lengthy delays. 2. Increased Financial Flexibility Leasing furniture with CWB National Leasing enhances your financial power. It allows you to spread costs over manageable periodic payments instead of a large upfront purchase, freeing up capital for other important business operations. The option to add extra features or accessories to your furniture for a small payment increase allows for customization to meet specific workspace needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your furniture starts contributing to your business’s ambiance and functionality while being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal income fluctuations, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing furniture can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease furniture through CWB National Leasing is a strategic decision that equips your business with high-quality furnishings while maintaining financial agility. It ensures access to modern, comfortable, and stylish furniture, vital for creating a productive and inviting workspace, without the financial burden of a large upfront investment. This leasing approach enables enhanced office aesthetics, improved employee comfort, and increased overall productivity, contributing significantly to the success and growth of your business.
Service
In Stock
Service
New
ISO
Canaweld Inc. en Vaughan
Introducing the Canaweld CAD 81 Capacitor Discharge Stud Welding System: Power and Precision Unleashed! When it comes to high-performance stud welding, the Canaweld CAD 81 stands in a league of its own. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled precision, speed, and efficiency, making it the ultimate choice for welders in the oil and gas industry. Precision in a Blink - Capacitor Discharge Stud Welding The Canaweld CAD 81 utilizes a direct-current arc from a capacitor, allowing for weld times as quick as 1 to 6 milliseconds. The result? Seamlessly welded studs with no burn-through on the opposite side, even with very thin metals. Perfect for smaller diameter studs, pins, non-standard materials, and when precision is paramount. Compact Yet Powerful - Unmatched Welding Capacity Don't be fooled by its compact design; the Canaweld CAD 81 boasts a full 5/16-inch (M8) welding capacity, making it the most compact and versatile system on the market. Its microprocessor control ensures precise and consistent welding performance, while the enhanced charging circuit with a high output transformer maximizes its duty cycle, offering you unmatched welding power in a lightweight package. Safety and Ease of Use - User-Friendly and Efficient The Canaweld CAD 81 is designed with your safety and convenience in mind. With enhanced user feedback, including safety and fault codes, you can weld with confidence and peace of mind. The system comes complete with everything you need, including the gun, two ground cables, collets, changing tools, and a convenient carrying case for easy transportation. Features That Make a Difference Let's take a look at some of the remarkable features of the Canaweld CAD 81: • Weld Range: Accommodates US Stud Size #4 – 5/16”, Metric Stud Size (M3-M8), Stud diameter 0.112″ – 0.312″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 81,000uf Capacitance for rapid and powerful welds • Portable and Lightweight: Weighing only 25 lbs., take it anywhere the job demands • Ergonomic Design: Designed for comfort and ease of use during extended welding sessions • Heavy-Duty Cable Set: Ensures robust and reliable connections • Dual Ground Cable: For added safety and efficiency • Fully Adjustable Leg Set: Achieve the perfect welding angle for every job • Diagnostic LEDs: Easy troubleshooting and maintenance The Canaweld CAD 81 - Empowering Welders in the Oil and Gas Industry At Canaweld, we take pride in providing cutting-edge welding machines and accessories that meet the unique demands of the oil and gas industry. The CAD 81 exemplifies our commitment to excellence, innovation, and your welding success. Unleash the Power of Precision and Performance with the Canaweld CAD 81 Capacitor Discharge Stud Welding System. Empower your welding journey with Canaweld - Your Partner in Welding Excellence!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Hoca Oil Tools en Zwartemeer
Enhance Well Operations with Precision: Discover HOCA Oil Tools' Slip Stop In the world of oil and gas, where the margin for error is minute and the demand for efficiency and safety is paramount, the right downhole tools can make all the difference. At HOCA Oil Tools, we specialize in providing top-tier downhole slick line tools designed to meet and exceed industry challenges. Among our esteemed solutions is the Slip Stop, a critical component designed to bolster downhole operations' safety and effectiveness. HOCA's Slip Stop: The Cornerstone of Safe and Efficient Downhole Operations The Slip Stop by HOCA Oil Tools is engineered to provide unmatched reliability and control in various downhole environments. Crafted with precision from high-grade materials, this tool is designed to anchor securely within the wellbore, preventing the unwanted movement of downhole tools and equipment. It is an essential tool for ensuring the safety and success of numerous downhole activities, from well completion to intervention tasks. Experience the Unparalleled Quality of HOCA Oil Tools At HOCA Oil Tools, our commitment to excellence is reflected in every tool we provide, including the Slip Stop. We understand the complexities and challenges of downhole operations, which is why we are dedicated to delivering solutions that not only meet but exceed the expectations of the oil and gas industry. Incorporating the HOCA Slip Stop into your downhole operations is a step toward safer, more efficient, and more cost-effective well management. Our tools are designed with the end-user in mind, ensuring ease of use, reliability, and, most importantly, operational safety. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who rely on our Slip Stop to enhance their operational capabilities. Partner with us, and elevate your downhole operations with tools crafted for excellence and innovation. With HOCA Oil Tools, you're not just investing in a product; you're investing in peace of mind, operational integrity, and the future success of your downhole activities.
Buy
In Stock
Product & Service
New
API
Air Freight
IT Technical Support and Maintenance Services
Software DevelopmentEleks en Toronto
ELEKS IT Technical Support and Maintenance Services: Your Steady IT Compass In today's dynamic business landscape, flawless IT operations are imperative. The ever-evolving tech ecosystem requires impeccable management of technical challenges and periods of transformation. Enter ELEKS' advanced IT support and maintenance services – your guiding light in the realm of IT stability. ELEKS IT Technical Support and Maintenance Services: Guiding Your Path Protect Your IT Solution: Identifying issues and potential risks with your IT solution is the first step towards ensuring uninterrupted operations. Our swift resolutions minimize revenue loss and enable you to adapt seamlessly to environmental, IT infrastructure, and integration changes. No matter the landscape shift, your systems remain operational. Reinforce Your Skills: Equipped with expertise across multiple technological domains, we stand ready to help you overcome technical challenges and navigate digital transformations. Our knowledge base sets the stage for faster incident resolution and empowers your end-users with self-service capabilities, ensuring readiness for future changes. Overcome Complex Issues: Our IT technical support and maintenance services offer two tiers – L2 and L3. L2 swiftly gets you back on track post-failure, while L3 dives deep into complex issues, improving software by altering program code for enhanced performance. Reduce TCO of IT Systems: Years of experience pave the way for a seamless setup and robust support framework. This not only slashes your Total Cost of Ownership (TCO) but also facilitates faster issue resolution, garners superior customer feedback, and curtails systems maintenance expenditure. Transfer and Manage Duties and Risks: Our services enable your in-house team to focus on your core business, while we manage your IT infrastructure. Moreover, we're poised to provide after-hours support, ensuring you're covered for unforeseen circumstances. ELEKS IT Technical Support and Maintenance Services: Navigating Reliability Problem Resolution: Once an issue is reported, our team swiftly isolates the root cause and resolves it. Our proactive approach involves setting up monitoring tools to preempt incidents and potential problems, ensuring seamless operations for your users. L2 Technical Support: Quick recovery following a systems failure is guaranteed with our L2 support, all without making any alterations to your software code. This comprehensive service covers applications, databases, integration points, related environment components, and virtual cloud infrastructure. L3 Technical Support: For advanced software issues and improvements, our L3 support is your go-to solution. Our team of experts adeptly modifies your program code, covering everything from bug fixes and security/performance issues to system compliance checks and updates to integration interfaces. ELEKS IT Technical Support and Maintenance Services: Your IT Rock In a world where IT stability is paramount, ELEKS emerges as your steadfast partner. With our advanced support and maintenance services, your IT ecosystem gains the strength to navigate challenges and seize opportunities. Trust ELEKS to be your IT compass, guiding you towards unwavering operations and unwrapping the full potential of your digital endeavors.
Service
In Stock
Service
New
ISO
BL300 Heavy Inspection Class ROV
ROVPoseidon Robotics en Chandler
Exploring the Depths with Unmatched Precision: Introducing the BL300 Heavy Inspection Class ROV At Poseidon Robotics, we pride ourselves on pushing the boundaries of subsea exploration technology, and our latest creation, the BL300 Heavy Inspection Class ROV, exemplifies this commitment to excellence. Designed to tackle large payloads and challenging dives, the BL300 combines cutting-edge features with a professional Aluminum frame, delivering unparalleled performance in its class. A Collaboration of Innovation: The Birth of BL300 Developed in close collaboration with BLUELINK, LLC, the BL300 ROV emerged as a result of identifying and addressing the market's evolving needs. Launched in March 2019, this exceptional remotely operated vehicle has since redefined the heavy inspection class, becoming the preferred choice for professionals in the subsea industry. The Perfect Blend of Power and Precision The BL300 boasts a unique vectored thruster layout, strategically designed to provide optimum control and stability during underwater operations. Its professional Aluminum frame ensures durability and reliability, making it the ideal choice for challenging dives that demand exceptional performance. Moreover, by utilizing off-the-shelf components, we have achieved an unparalleled price/performance ratio, providing unbeatable value to our customers. Advanced Topside Integrated Console: A Complete Solution in One Package With the BL300 Heavy Inspection Class ROV, we've taken convenience to the next level. The Topside Integrated Console houses a 22-inch sunlight-readable monitor and a hand controller, eliminating the need for additional equipment. The ROV flight computer supports a fully stabilized mode, enabling six-axis stability for precise maneuvering and control. Unrivaled Payload Capacity and Thruster Configuration The BL300 redefines what's possible in a heavy inspection class ROV by offering exceptional payload space and capacity. With a depth rating of 400 meters, this powerhouse can handle the most demanding subsea missions. The smaller diameter vertical thrusters are stacked to optimize the payload area, making it the perfect solution for accommodating large payloads while maintaining stability. The BL300 at a Glance: Specifications • Depth rating: 400m • Dimensions: 725x465x425mm (LWH) • Weight in air: 32.1kg • Payload capacity (fresh water): 9.8kg • Payload area: 610mm x 457mm • Thruster: 8 lateral (45deg), 6 vertical • Ballard Pull: 20kg lateral, 24kg vertical • Top speed: 3 knots • Video: 1080 HD IP camera with tilt • Aux video: NTSC/PAL input • Lights: 10x 1,500 Lumen each • Connectivity: 1x Ethernet, 4x Serial • Aux power: 5/12/24VDC regulated The Topside Integrated Console: Specifications • Output voltage: 400VDC, 3kW • Input voltage: 240VAC, 20A maximum • Monitor: 22in HD sunlight readable • Case: wheeled, 610x420x260mm, 24kg • Fully isolated output with LIM • Intel PC with Windows 10 installed • Aux HDMI monitor output The Unbreakable Tether To ensure a secure connection and reliable communication between the BL300 ROV and the topside console, our tether is designed with utmost strength and durability. With a breaking strength of 500kg and a 15mm diameter, this robust tether can handle the most demanding subsea conditions, ensuring seamless transmission of data and video. Experience the Poseidon Robotics Difference As pioneers in the subsea robotics and ROV industry, Poseidon Robotics has continuously driven innovation and excellence, and the BL300 Heavy Inspection Class ROV is the epitome of our dedication. Explore new depths with confidence, efficiency, and precision, and join the ranks of professionals worldwide who rely on Poseidon Robotics for unmatched performance. Unleash the Power of BL300 Today Discover a new era of subsea exploration with the BL300 Heavy Inspection Class ROV by Poseidon Robotics. Contact us now to explore the possibilities and equip yourself with the most advanced ROV technology available. Together, we will embark on a journey of discovery, uncovering the secrets that lie beneath the waves.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Casing Tracking and Management
PipeDNA is a cloud-based pipe management solutionPipeDNA en Houston
Streamline Casing Tracking and Management with PipeDNA: Maximizing Efficiency in the Oil and Gas Industry Effective casing tracking and management are essential for ensuring seamless operations in the oil and gas industry. Introducing PipeDNA, a cutting-edge cloud-based platform designed to manage pipe and tube throughout the entire supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively track and manage casing, enhancing visibility, productivity, and operational efficiency. Comprehensive Inventory and Tracking: PipeDNA provides full inventory management and tracking capabilities for casing, enabling stakeholders to have a real-time view of their casing assets. From tracking utilization and activity to identifying trends, the platform equips stakeholders with the tools they need to make informed decisions about their casing inventory. With enhanced visibility, stakeholders can optimize their inventory levels, minimize downtime, and maximize resource utilization. Efficient Logistics Management: Managing casing logistics can be complex, but PipeDNA simplifies the process by offering comprehensive logistics management features. Stakeholders can efficiently handle shipments, track the status of casing in transit, and streamline documentation processes. Additionally, the platform facilitates pipe bundling, ensuring the efficient grouping and transportation of casings, which leads to cost savings and improved operational efficiency. Streamlined Inspection Management: PipeDNA's inspection management capabilities extend to casing, enabling stakeholders to efficiently manage inspection jobs across multiple sites. The platform allows for seamless coordination, tracking of job statuses, and management of inspection profiles. By centralizing inspection data and streamlining workflows, PipeDNA optimizes the inspection process, ensuring compliance with industry standards and mitigating risks associated with faulty casings. Automated Tally Operations: Tallying casing is a critical task that can be time-consuming and prone to errors. PipeDNA simplifies and automates tally operations, allowing stakeholders to create and manage tally jobs within the platform. By automating tally workflows, the platform minimizes manual intervention, reduces errors, and saves valuable time. Stakeholders can confidently rely on accurate tallies, enhancing efficiency and accuracy throughout their casing management processes. Enhanced Identification and Traceability: PipeDNA's identification and traceability features provide quick and reliable identification of casing, along with comprehensive details, activity history, and traceability documentation. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, enabling stakeholders to easily track and identify individual casings. By enhancing identification and traceability, PipeDNA strengthens quality control measures, streamlines recalls if necessary, and supports compliance with industry regulations. Seamless Integration of Manufacturing Data: PipeDNA seamlessly integrates manufacturing data into its platform, eliminating the need for manual data entry and reducing the risk of human errors. This integration ensures that casing-related data, including manufacturing details, is readily available within the system. By automating the transfer of manufacturing data, PipeDNA enables stakeholders to maintain accurate and reliable records, facilitating efficient casing management and data-driven decision-making. Leveraging Emerging Technologies: PipeDNA leverages today's emerging technologies to optimize casing tracking and management. The platform supports barcoding and labeling systems, integrating popular barcode standards such as UPC, EAN, and QR codes. Additionally, PipeDNA is RFID ready, enabling stakeholders to integrate RFID technologies such as labels and asset tags for seamless tracking and management of casings. Furthermore, the platform supports IoT data integrations using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced casing management processes. PipeDNA revolutionizes casing tracking and management in the oil and gas industry, providing stakeholders with a powerful cloud-based solution. By offering comprehensive inventory and tracking capabilities, efficient logistics management, streamlined inspection processes, automated tally operations, enhanced identification and traceability, and seamless integration of manufacturing data, PipeDNA empowers stakeholders to maximize efficiency and productivity. Embrace PipeDNA and elevate your casing tracking and management to new levels of effectiveness, enabling seamless operations throughout the oil and gas supply chain.
Service
Currently in Use
Service
New
API
Air Freight
20 Litre Industrial Cleaner by EnviroBlu
EnviroBlu Cleaner and DegreaserMekapisk EnviroBlu Solutions Inc. en St. John’s
Re-Inventing Industrial Cleaning with EnviroBlu: The Ultimate Solution for Equipment and Large Areas In the high-speed, high-stakes world of industry, efficiency and cost-effectiveness aren't just goals—they're necessities. Enter Mekapisk EnviroBlu Solutions Inc. and our 20-litre EnviroBlu cleaning solution. Specifically engineered for cleaning equipment and expansive areas, this product delivers exceptional power while staying true to our commitment to environmental sustainability. Why EnviroBlu is a Game-Changer At EnviroBlu, we're not just committed to safe cleaning; we're redefining it. Our water-based, non-toxic, phosphate-free formula ensures rapid, reliable cleaning without compromising the planet. Here's how our 20-litre EnviroBlu can revolutionize your cleaning routine: 1. Unmatched Cleaning Efficiency EnviroBlu’s advanced aqueous surfactant technology dives deep, penetrating dirt and grime at the molecular level. Whether you're tackling industrial machinery, large equipment, or sprawling floor spaces, EnviroBlu gets the job done faster and more efficiently, saving you precious time. 2. Significant Cost Savings With EnviroBlu, cleaning time and product usage are drastically reduced. Our potent formula means you use less to achieve more, leading to substantial cost savings. The 20-litre size is perfect for bigger cleaning tasks, ensuring you have ample supply for extensive use. 3. Environmentally Friendly Our unwavering commitment to sustainability is infused into every bottle of EnviroBlu. The water-based, non-toxic, and phosphate-free formula means you can clean confidently, knowing you're protecting the environment. Maintain a safe, eco-friendly workspace while adhering to the highest environmental standards. 4. Versatile and Reliable EnviroBlu is your all-in-one solution for various applications, from heavy-duty equipment cleaning to large-scale maintenance. Its versatility makes it indispensable in industrial, commercial, and even residential settings. Whatever the task, EnviroBlu delivers consistent, reliable results. 5. Certified Safe for Various Uses EnviroBlu is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner. This ensures our product is safe across diverse environments, including food processing areas and maritime industries, meeting stringent safety standards. 6. Easy to Use Our 20-litre EnviroBlu product comes with straightforward instructions for both small and large cleaning tasks. Whether using a power washer or manual methods, EnviroBlu's efficiency makes the process hassle-free and effective. Directions for Use Smaller, Less Soiled Areas: 1. Mix water with EnviroBlu as per the required dilution ratio. 2. Spray the mixed solution directly on the surface. 3. Wipe the area with a dry cloth. Larger, Heavily Soiled Areas (Without Power Washer): 1. Pre-rinse the affected area with water. 2. Spray EnviroBlu directly on the target area and let it work for 1-3 minutes. 3. Brush the area if necessary. 4. Rinse thoroughly with water. 5. Repeat if the area has not been cleaned recently. Larger, Heavily Soiled Areas (With Power Washer): 1. Spray the area with a water jet only. 2. Introduce EnviroBlu into the power washer. 3. Rinse with straight water. Dilution Ratios 100% • Cleaning heavy machinery and equipment • Cleaning oil spills from most surfaces, including asphalt • Degreasing engines and concrete floors 75% • Flushing out impurities from pipes and radiators • Preparing surfaces for primer and paint in metal applications • Cleaning wheels, tires, ovens, and grills 50% • Cleaning interiors of vehicles and aircraft • Cleaning fiberglass boats, swimming pools, and food processing equipment • Cleaning carpets, upholstery, and kitchen appliances 25% • Cleaning leather, vinyl, and painted walls Stay Green, Go Blu! Opt for the 20-litre EnviroBlu for your equipment and large area cleaning needs. Our powerful, eco-friendly formula ensures exceptional results while saving you time and money. Embrace a cleaner, greener future with EnviroBlu.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Double Insulated AWG 2/0 Cable
Welding CableCanaweld Inc. en Vaughan
Unleash the Power of Precision Welding with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2)! In the oil and gas industry, precision welding is not just a necessity; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our Welding Cable Double Insulated AWG 2/0 (67.4 mm2) is a testament to our commitment to excellence and innovation. Unparalleled Quality and Performance: Crafted with utmost precision, our welding cables are double insulated and made from 100% pure copper. The Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172 ensures outstanding conductivity, allowing you to achieve precise welds with ease and confidence. Built for Safety: Safety is paramount in welding operations, and our welding cables are designed with this principle in mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, our cables offer robust insulation, safeguarding you from potential hazards during welding tasks. Unrivaled Durability: The oil and gas industry demands cables that can withstand the harshest conditions. Our welding cables are engineered to be highly resistant to cuts, tears, and abrasions, ensuring they can handle the toughest challenges with ease. They are also built to resist oil, solvents, and chemicals, providing unparalleled durability in even the most demanding environments. Flexibility Redefined: Navigate through complex welding setups effortlessly with our welding cables' remarkable flexibility. With a minimum bending radius of 4 times the cable diameter, you can work in confined spaces and challenging angles without any hindrance. Environmental Responsibility: At Canaweld, we take our environmental responsibility seriously. Our welding cables are RoHS compliant, adhering to strict environmental standards and being free from harmful substances. When you choose Canaweld, you are not just investing in top-tier welding accessories but also contributing to a cleaner, greener world. Elevate Your Welding Experience: Experience the difference with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2). Unleash the power of precision welding and take your oil and gas projects to new heights of success. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. When it comes to welding, choose Canaweld for the ultimate in quality, safety, and performance. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers.
Buy
In Stock
Manufacturer
New
ASTM
Land Freight
Safe-T-Whip Qualified Installers
Restraint Install PersonnelExpert Safe-T-Whip Qualified Installers: Your Gateway to Safety and Efficiency At Safe-T-Whip & Restraints Inc., we not only offer top-of-the-line safety restraint systems but also a comprehensive service that ensures your worksite meets all safety standards. Renting or owning your own Safe-T-Whip system is a step towards enhanced safety, but qualified installation personnel are essential to ensure compliance with local safety codes. That's where our expert qualified installers come in to make a real difference. Your Safety, Our Priority: We understand the criticality of safety in the oilfield, and that's why we provide the option of sending our qualified installers to your site to perform the rig up and down. Their expertise and experience ensure that every aspect of the installation process meets the highest safety standards, giving you peace of mind that your workforce is protected. Empowering Your Crew: Alternatively, we can certify one of your own crew members to become proficient installers through our Safe-T-Whip certification process. We provide comprehensive training that equips them with the knowledge and skills needed to perform installations efficiently and effectively. Once trained, they'll be able to rig up and down the system confidently, ensuring maximum safety for your operations. Quick and Easy Installation: The Safe-T-Whip system is designed with simplicity and efficiency in mind. Whether our qualified installers handle the setup or your certified crew members take charge, you'll quickly discover just how quick and easy the installation process can be. Understanding the flow of the links and checking for complete link coverage becomes second nature with our training. Ensuring Your Safety: Your worksite's safety is at the core of our service. No matter which installation option you choose, we are here to help you every step of the way. Rest assured that with our qualified installers or your certified crew, your Safe-T-Whip system will be installed correctly, ensuring maximum protection for your team and equipment. Lightweight and User-Friendly: The entire Safe-T-Whip system is designed to be lightweight and user-friendly. Hauling and installing it require just a single person, enhancing convenience and making it a practical safety solution for your oilfield operations. Choose Safe-T-Whip & Restraints Inc. for Enhanced Safety: With Safe-T-Whip qualified installers, you gain access to a team of experts who prioritize your safety above all else. Contact us today and discover how we can make your worksite safer and more efficient. At Safe-T-Whip & Restraints Inc., your safety is our commitment.
Service
In Stock
Service
New
API
Air Freight
2-3/8 inch Halliburton WellStar TR-SCSSSV
SCSSSV WellstarMidastream Supply Company en Airdrie
The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Voice, data, and video Services
Nulux Networks en Edmonton
Revolutionizing the Oil and Gas Industry: Nulux’s Superior Voice, Data, and Video Services In the fast-paced, high-stakes realm of the oil and gas industry, communication is not just vital; it's the pivotal axis around which safe and efficient operations revolve. The seamless interchange of data, unerring voice communication, and accurate video services are instrumental in ensuring that engineering professionals manage operations, diagnose issues, and implement strategies effectively. Welcome to Nulux Network Solutions, where we fortify your operational proficiency with unparalleled voice, data, and video services through our top-tier copper cabling network installations. The Nulux Distinction: Bridging Robust Communication with Operational Excellence Nulux, a name synonymous with excellence in telecommunications and networking, brings forth two decades of unmatched experience, especially in the realm of distributed control system (DCS) network upgrades for industrial projects across North America. Our commitment to high-quality networks is not just an offering; it’s a promise delivered consistently across projects, ensuring your communication channels remain unerring, reliable, and perpetually facilitating optimal operations. Engaging Every Facet of Communication with Comprehensive Solutions In the industrial expanses where engineering professionals of the oil and gas sector helm complex operations, Nulux's services in voice, data, and video become the unerring channels that ensure: Voice Services: Enjoy crystal-clear, uninterrupted voice communications that enable precise correspondence across various facets of your operations, ensuring every directive and update is communicated flawlessly. Data Services: Facilitate the impeccable transfer of crucial data with our high-bandwidth, reliable copper networks, ensuring real-time data transmission, storage, and retrieval without a hitch, keeping your operations, analysis, and decision-making well-informed. Video Services: Implement seamless video communication and surveillance across your operations, enabling real-time monitoring, engagement, and management, thereby ensuring safety, operational control, and effective remote management. Why Copper Networks are Integral to Your Communication Channels Nulux not only delivers impeccable voice, data, and video services but does so by leveraging the myriad benefits copper networks offer, such as: High-Bandwidth Transmission: Ensure that your data, voice, and video communications are facilitated with speeds up to 10 Gbps, ensuring real-time communication and data transfer. Long-Term Reliability and Durability: Experience uninterrupted services with a network that withstands the tests of time and operational demands, ensuring your communication channels remain perpetually robust. Ease of Installation and Cost-Effectiveness: With a network that is not only economically viable but also easy to implement, your operations gain the benefit of a communication network that is both, financially and operationally, advantageous. Connect with Nulux: Your Ally in Unerring Communication At Nulux, we understand networks, but more crucially, we comprehend the imperatives of seamless communication, especially in the demanding operational landscape of the oil and gas industry. With a team that encapsulates experience, expertise, and dedication, your network is not merely an infrastructure; it’s a relentless force propelling your operations towards unbridled success and communication clarity. Ensure your voice is heard, your data is transferred, and your visuals are seen with unmatched clarity. Engage with Nulux Network Solutions today, and let’s craft a communication network that becomes the unwavering backbone of your operational success and excellence.
Service
In Stock
Service
New
ISO
Hoca Oil Tools en Zwartemeer
Elevate Well Integrity and Control with HOCA Oil Tools' Collar Stop In the complex realm of downhole operations, maintaining control and integrity within the wellbore is not just a goal—it’s a necessity. HOCA Oil Tools, a leader in downhole slick line tools, introduces the Collar Stop, a pivotal component designed to optimize downhole operations and ensure the utmost well integrity. Our commitment to innovation, quality, and reliability shines through in this essential tool, tailored to meet the demanding needs of modern oil and gas extraction. HOCA’s Collar Stop: Ensuring Unparalleled Downhole Control and Integrity The Collar Stop by HOCA Oil Tools is engineered for precision, durability, and versatility. Designed to lock securely into the collar recess of tubing, our Collar Stop provides an essential anchoring point for downhole tools and operations. Fabricated with top-grade materials and subjected to rigorous testing, the HOCA Collar Stop stands as a testament to our dedication to excellence, providing reliable performance in the most challenging downhole environments. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are committed to providing the oil and gas industry with downhole solutions that transcend conventional limitations. Our Collar Stop is a prime example of this commitment, embodying our dedication to safety, efficiency, and innovation. Incorporating the HOCA Collar Stop into your downhole toolkit not only elevates operational control and well integrity but also aligns your operations with the highest standards of quality and performance. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner committed to your success, offering cutting-edge solutions and unparalleled support. Choose HOCA Oil Tools’ Collar Stop for your downhole operations and join the ranks of satisfied customers who rely on our tools to secure their success. Elevate your well operations with HOCA Oil Tools – where innovation meets integrity.
Buy
In Stock
Product & Service
New
API
Air Freight
CWB National Leasing en Winnipeg
Elevate Your Warehouse Operations with Indoor Forklift Leasing from CWB National Leasing Enhancing Efficiency and Productivity in Material Handling with Flexible Equipment Solutions For businesses operating in warehousing, retail, manufacturing, or any sector that involves indoor material handling, indoor forklifts are crucial for efficiency and productivity. Leasing indoor forklifts through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially prudent solution for businesses looking to enhance their operational capabilities. Here’s how leasing indoor forklifts can benefit your business: 1. Rapid Access to High-Quality Equipment CWB National Leasing understands the critical need for efficient material handling in your operations. They offer a fast leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround ensures that your indoor forklifts can be delivered and operational quickly, enhancing your warehouse or manufacturing floor efficiency without delay. 2. Increased Financial Flexibility Leasing indoor forklifts with CWB National Leasing increases your buying power. Opting for periodic payments over a large upfront purchase frees up capital for other important business investments. Furthermore, the flexibility to add extra features or accessories to your forklifts for a small payment increase allows for customization to meet your specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your indoor forklifts start contributing to your business’s revenue while they're still being paid off. This approach helps maintain a healthy balance between expenses and income, which is crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is especially beneficial for businesses with seasonal fluctuations in income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing indoor forklifts can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can positively impact your business’s tax position.
Service
In Stock
Service
New
ISO
Transport Trucking services for local and international equipment hauling
Transport TruckFeldman Transport en Red Deer
Transport trucks for long haul equipment moves. Specializing in international and express shipments. Since truck transportation effectively remains the most direct solution for the transport of your goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. If you need to get your goods from one place to another in a safe, reliable and cost effective way then truck transportation is hard to beat. So hard in fact that transporting goods by truck is still the most widely used mode of transport in Canada and North America. Contact us to arrange your next rig move or industrial equipment shipment.
Rental
Currently in Use
Product & Service
Used
ISO
Land Freight
ID OILTOOLS B.V. en Oudkarspel
Introducing the revolutionary slim design composite plug from ID OILTOOLS – the "Long Range" Composite Frac Plug! With its advanced engineering, this plug is designed to pass through damaged casing, restricted internal casing diameters, and existing casing patches in the wellbore. Now, you can get more from every investment with this cost-effective option for both vertical and horizontal wells. The "Long Range" plug features a unique pump-down element design that requires less fluid and pump pressure to deploy the plug horizontally. It is made with better materials for better results, incorporating composite material and aluminum construction. This makes it possible for wells previously marked for abandonment to be re-completed, increasing overall production and profitability. Our composite frac plug can be configured as a Ball Drop or Bridge Plug, and it can be deployed on wireline or coiled tubing. Its dependable cast iron slips secure the plug in place, and the positive lock-up feature ensures lock-up of multiple plugs in a single wellbore. Plus, custom O.D. is available upon request. Don't miss out on this patented technology that has already proven its success. Choose ID OILTOOLS for the Long Range Composite Frac Plug and experience the next level of downhole solutions.
Buy
In Stock
Product
New
API
Sea Freight
Nulux Networks en Edmonton
Structured Cabling by Nulux Network Solutions: The Bedrock of Your Resilient Network Infrastructure in the Oil and Gas Industry In the intricate and unrelenting realm of the oil and gas industry, the backbone of successful, uninterrupted operations rests on a sturdy network infrastructure. Not merely a conduit for communication, but a veritable lifeline that ensures every unit, every device, and every system communicates seamlessly, securing the continuous flow of vital data across every echelon of your business. This is where Nulux Network Solutions champions your endeavors through our unparalleled expertise in Structured Cabling. Nulux Network Solutions: Your Harbor in the Tempest of Network Demands Your venture into the industrious domains of energy extraction and refinement is formidable, laden with challenges that demand a network just as robust and reliable as the spirited teams operating within. Nulux, with a lauded heritage of over two decades, curates tailored copper cabling networks, ensuring that your network infrastructure stands unwavering amidst operational rigors. While our specialization permeates various strands of telecommunications and networking, structured cabling, particularly utilizing copper, becomes a focal point for businesses that demand: High-Bandwidth Transmission: Facilitating transmissions up to 10 Gbps, ensuring your data flows unrestrained. Reliability: A steadfast performance, ensuring your operations are never hampered by network downtimes. Cost-Effectiveness: A pragmatic solution that assures optimal performance without burdening operational costs. Copper Cabling by Nulux: The Confluence of Flexibility, Durability, and Affordability Structured cabling, particularly utilizing copper, furnishes your business with a network that is not just remarkably flexible, easily terminated, and reliable, but also phenomenally durable, ensuring that the infrastructure remains unfazed amidst the most demanding operational scenarios. Nulux enhances this inherent virtue of copper cabling by ensuring: Holistic Network Solutions: From the embryonic stages of design and planning to installation and life cycle support. Upgrades & Evolution: Ensuring your network is never obsolete, perpetually evolving in tandem with technological advancements. Tailored Solutions: Customizing solutions that cater explicitly to your voice, data, and video service requirements, ensuring no aspect of your operations is ever compromised. Immerse Your Operations in a Cocoon of Network Security and Reliability Navigating through the complexities of DCS network upgrades and deploying copper cabling systems, encompassing telephone, ethernet, coax, and hybrid networks, Nulux has not just crafted but meticulously refined our approach towards network solution delivery. Our commitment towards delivering high-quality, high-performance networks at affordable rates has been unwavering and resolute. Steer Your Business Towards Operational Excellence with Nulux Your business, deeply embedded in the vital sectors of energy, seeks more than just a service provider. It seeks a partner that comprehends the profundity of operational demands and curates solutions that are not merely effective but exemplary. Nulux Network Solutions invites you to experience a partnership where your network demands are met with solutions that are not merely about connectivity but about ensuring your operational pulse never falters. Reach out to us today, and let’s architect a network that becomes the silent, steadfast guardian of your operations, ensuring every bit of data traverses with reliability, every communication occurs seamlessly, and your business thrives amidst the operational challenges of the energy sector.
Service
In Stock
Service
New
ISO
Valve and Prong Type Equalizing Sub-Assembly
Downhole ToolsHoca Oil Tools en Zwartemeer
Maximize Downhole Functionality with HOCA Oil Tools' Valve and Prong Type Equalizing Sub Assemblies In the complex world of downhole operations, precision and reliability are paramount for ensuring the safety and efficiency of well interventions. At HOCA Oil Tools, we understand the critical nature of these operations and respond with our top-tier Valve and Prong Type Equalizing Sub Assemblies. These specialized tools are designed to address and overcome the unique challenges presented by downhole environments, ensuring that your operations proceed smoothly and effectively. HOCA’s Valve and Prong Type Equalizing Sub Assemblies: Tailored for Excellence Our Valve and Prong Type Equalizing Sub Assemblies are engineered to facilitate the critical process of pressure equalization in downhole operations, particularly during the installation or retrieval of downhole equipment. These assemblies are essential for safely managing pressure differentials, preventing equipment damage, and ensuring the safety of the wellbore and personnel. Available in a variety of configurations to meet different well conditions and requirements, our equalizing subs are constructed with precision and durability in mind. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Valve and Prong Type Equalizing Sub Assemblies means opting for a product backed by expertise, innovation, and commitment to quality. We pride ourselves on providing solutions that not only meet but exceed the rigorous demands of the oil and gas industry. Whether you are facing standard operational tasks or unique downhole challenges, our equalizing subs provide the performance and reliability essential for success. Incorporating our Valve and Prong Type Equalizing Sub Assemblies into your downhole toolkit is a step towards enhanced operational efficiency, safety, and success. With HOCA Oil Tools, you gain more than just equipment; you gain a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and take the first step towards optimized operations. Partner with us and leverage the power of advanced downhole solutions designed to enhance your oilfield success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards in efficiency, safety, and performance in the oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
InWaTec Combined en Vechta
Navigating Offshore Challenges with InWaTec Combined’s Offshore Mini-Coil Services Offshore oil and gas operations come with a unique set of logistical challenges. In the face of limited deck space and crane capacity, traditional coiled tubing units (CTUs) often fall short in providing the necessary services without compromising operational economics. InWaTec Combined rises to the occasion with our Offshore Mini-Coil Services, designed to deliver efficient, cost-effective well intervention and maintenance solutions in even the most constrained offshore environments. Compact Efficiency: Our capillary/mini-coil CTU is a game-changer for offshore operations. Its compact design minimizes the footprint on the deck, providing a practical alternative to bulkier traditional units. This space-efficient solution is crucial on platforms where every square foot counts. Lift and Load Advantages: The lightweight nature of our Mini-Coil CTU addresses the common challenges of crane limitations. With the reduced load requirements, our Mini-Coil equipment can be easily maneuvered and set up, facilitating a range of well services without the need for heavy lifting equipment. Versatile Applications: Despite its compact size, the Mini-Coil CTU is robust in capabilities. It's adept at a multitude of tasks, from precision interventions like chemical treatments and scale removal to essential maintenance procedures and even wellbore cleanouts. Economic Solution: InWaTec Combined’s Offshore Mini-Coil Services are not just operationally advantageous; they also present significant cost savings. The reduced logistical demands coupled with the efficiency of our Mini-Coil operations translate into a more economical approach to servicing wells offshore. Customized Service Delivery: Understanding that no two wells or offshore platforms are the same, we offer customized Mini-Coil solutions tailored to the specific requirements of each operation. Our team of experts meticulously plans every aspect of the service delivery, ensuring that it aligns perfectly with our clients' operational and economic objectives. At InWaTec Combined, we are committed to innovation and excellence in offshore well services. Our Offshore Mini-Coil Services embody this commitment, providing operators with the assurance that even under the constraints of limited deck space and crane capacity, their wells can be serviced efficiently and effectively. Choose InWaTec Combined for your offshore well interventions, and experience the strategic advantage of our Offshore Mini-Coil Services. We are dedicated to optimizing your operations, ensuring that your offshore wells maintain peak performance with minimal disruption. Let us bring our compact, powerful solutions to your platform, where space is at a premium, but potential is limitless.
Service
In Stock
Service
New
API
Land Freight
Canaweld Inc. en Vaughan
Introducing the Canaweld CAD 81 Capacitor Discharge Stud Welding System: Power and Precision Unleashed! When it comes to high-performance stud welding, the Canaweld CAD 81 stands in a league of its own. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled precision, speed, and efficiency, making it the ultimate choice for welders in the oil and gas industry. Precision in a Blink - Capacitor Discharge Stud Welding The Canaweld CAD 81 utilizes a direct-current arc from a capacitor, allowing for weld times as quick as 1 to 6 milliseconds. The result? Seamlessly welded studs with no burn-through on the opposite side, even with very thin metals. Perfect for smaller diameter studs, pins, non-standard materials, and when precision is paramount. Compact Yet Powerful - Unmatched Welding Capacity Don't be fooled by its compact design; the Canaweld CAD 81 boasts a full 5/16-inch (M8) welding capacity, making it the most compact and versatile system on the market. Its microprocessor control ensures precise and consistent welding performance, while the enhanced charging circuit with a high output transformer maximizes its duty cycle, offering you unmatched welding power in a lightweight package. Safety and Ease of Use - User-Friendly and Efficient The Canaweld CAD 81 is designed with your safety and convenience in mind. With enhanced user feedback, including safety and fault codes, you can weld with confidence and peace of mind. The system comes complete with everything you need, including the gun, two ground cables, collets, changing tools, and a convenient carrying case for easy transportation. Features That Make a Difference Let's take a look at some of the remarkable features of the Canaweld CAD 81: • Weld Range: Accommodates US Stud Size #4 – 5/16”, Metric Stud Size (M3-M8), Stud diameter 0.112″ – 0.312″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 81,000uf Capacitance for rapid and powerful welds • Portable and Lightweight: Weighing only 25 lbs., take it anywhere the job demands • Ergonomic Design: Designed for comfort and ease of use during extended welding sessions • Heavy-Duty Cable Set: Ensures robust and reliable connections • Dual Ground Cable: For added safety and efficiency • Fully Adjustable Leg Set: Achieve the perfect welding angle for every job • Diagnostic LEDs: Easy troubleshooting and maintenance The Canaweld CAD 81 - Empowering Welders in the Oil and Gas Industry At Canaweld, we take pride in providing cutting-edge welding machines and accessories that meet the unique demands of the oil and gas industry. The CAD 81 exemplifies our commitment to excellence, innovation, and your welding success. Unleash the Power of Precision and Performance with the Canaweld CAD 81 Capacitor Discharge Stud Welding System. Empower your welding journey with Canaweld - Your Partner in Welding Excellence!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Injection Safety MC Valve 2-1/2 inch
MC ValveMidastream Supply Company en Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
In Stock
Product
New
ISO
Land Freight
Inicia sesión para añadir favorito