Plug with Equalizing Prong and Valve Sub-Assembly

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Are you looking for a game-changing solution that can revolutionize your oil and gas operations? Look no further than the Lean Environmental Services System (LESS) unit, the innovative mobile system designed to minimize pollution, risks, costs, and time during well service operations. The LESS unit is specifically designed to support and assist various well service operations such as electric line, slickline, and coiled tubing. By preventing any fluid or gas releases during these operations, the LESS unit can eliminate risks to people and the environment. The unit stores all the fluids into its tanks, reducing the risk of spills and leaks that can lead to costly cleanup operations and environmental damage. In addition to reducing risks and pollution, the LESS unit can significantly reduce costs and time associated with well service operations. With its efficient design and advanced technology, the unit can streamline operations and enhance productivity, resulting in faster job completion and higher efficiency. But that's not all - the LESS unit also offers the possibility to re-inject fluids into the well at the end of the job, further reducing environmental impact and promoting responsible resource management. With its sustainable features and advanced technology, the LESS unit is a powerful tool for companies looking to improve their environmental performance and reduce their carbon footprint. Don't miss out on the opportunity to revolutionize your operations with the Lean Environmental Services System (LESS) unit. Contact us today to learn more about how this innovative mobile system can benefit your business and help you achieve your sustainability goals.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Transform Your Workspace with Furniture Leasing from CWB National Leasing Elevating Your Business Environment with Stylish and Flexible Furnishing Solutions Creating a functional and aesthetically pleasing workspace is crucial for any business, whether it's a startup, a growing company, or an established corporation. Leasing furniture through Canadian Western Bank (CWB) National Leasing provides a flexible, cost-effective, and convenient solution for businesses looking to enhance their workspace. Here’s how leasing furniture can benefit your business: 1. Quick Access to Contemporary Office Furniture CWB National Leasing values the importance of a well-furnished workspace in boosting productivity and morale. They offer a fast leasing process, with decisions typically made within 48 hours of application submission. This ensures that your furniture can be delivered and set up quickly, transforming your office space without lengthy delays. 2. Increased Financial Flexibility Leasing furniture with CWB National Leasing enhances your financial power. It allows you to spread costs over manageable periodic payments instead of a large upfront purchase, freeing up capital for other important business operations. The option to add extra features or accessories to your furniture for a small payment increase allows for customization to meet specific workspace needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your furniture starts contributing to your business’s ambiance and functionality while being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal income fluctuations, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing furniture can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease furniture through CWB National Leasing is a strategic decision that equips your business with high-quality furnishings while maintaining financial agility. It ensures access to modern, comfortable, and stylish furniture, vital for creating a productive and inviting workspace, without the financial burden of a large upfront investment. This leasing approach enables enhanced office aesthetics, improved employee comfort, and increased overall productivity, contributing significantly to the success and growth of your business.

Revolutionizing Industrial Cleaning: The 1000 Litre IBC of EnviroBlu At Mekapisk EnviroBlu Solutions Inc., we’re driven by a relentless pursuit of innovation and sustainability. Imagine a cleaning solution that’s not just powerful but also designed for the most demanding environments—continuous cleaning operations, remote locations, and mobile solutions. Introducing the 1000 litre IBC of EnviroBlu cleaner. This isn't just a product; it's a paradigm shift in industrial maintenance. The EnviroBlu Vision Our mission is simple: to create a cleaner, safer world for everyone. Built on the indigenous values of respecting and protecting our lands and waters, Mekapisk EnviroBlu Inc. and the EnviroBlu brand are dedicated to transforming industries through sustainable practices. Why EnviroBlu? Unparalleled Efficiency and Cost Savings In the industrial world, time is a precious commodity. The 1000 litre IBC of EnviroBlu cleaner is engineered for efficiency. Our advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring rapid and thorough cleaning. Whether you’re running continuous operations, working in remote locations, or need a self-contained mobile solution, EnviroBlu gets the job done faster, cutting down cleaning time significantly. 1. Continuous Cleaning Operations For facilities requiring round-the-clock cleanliness, the 1000 litre IBC of EnviroBlu is a game-changer. Its large capacity ensures you have a consistent supply of powerful cleaner, reducing downtime and keeping your operations running smoothly. No more frequent refills; just uninterrupted, efficient cleaning. 2. Remote Locations In remote areas, logistics can be a challenge. The 1000 litre IBC of EnviroBlu provides a self-sufficient solution, eliminating the need for constant resupply. Its robust design and high capacity mean fewer deliveries, reducing transportation costs and environmental impact. 3. Mobile Solutions For industries that require mobility, such as maritime, construction, and oil and gas, the 1000 litre IBC offers a portable, self-contained cleaning system. Mounted on trucks, ships, or platforms, it delivers powerful cleaning capabilities wherever you need them. Environmentally Responsible EnviroBlu’s water-based, non-toxic, phosphate-free formula is safe for both people and the planet. Certified food safe by the Canada Food Inspection Agency (CFIA) and recognized as a Green Marine Partner, EnviroBlu ensures that you meet the highest environmental standards while maintaining superior cleanliness. The EnviroBlu Advantage 1. Superior Cleaning Power EnviroBlu’s advanced formula delivers industrial-strength cleaning without compromising safety. From heavy machinery and equipment to large surface areas, it tackles the toughest grime efficiently. 2. Significant Cost Savings With the 1000 litre IBC, you reduce product usage, labor, and downtime. The high-capacity container minimizes the need for frequent refills and resupply, lowering operational costs. Our powerful formula ensures you use less product for maximum results, saving you money. 3. Versatility Across Applications EnviroBlu is ideal for a range of applications, from industrial and commercial to remote and mobile operations. Its versatility makes it an indispensable tool in various sectors, including: • Industrial: Continuous operations in manufacturing, processing plants, and heavy industry. • Remote Locations: Mining sites, oil rigs, and remote construction projects. • Mobile Solutions: Maritime, transportation, and emergency response units. Green Marine Partner: Advancing Environmental Excellence EnviroBlu is a proud Green Marine Partner, participating in North America's leading environmental certification program for maritime industries. This voluntary initiative helps participants improve their environmental performance beyond regulations, targeting key issues related to air, water, and soil quality. How to Use EnviroBlu For Continuous Operations: 1. Connect the IBC to your automated cleaning system. 2. Monitor and maintain levels to ensure uninterrupted cleaning. For Remote Locations: 1. Position the IBC in a central, accessible location. 2. Use as needed, ensuring regular checks to maintain supply. For Mobile Solutions: 1. Secure the IBC on your mobile platform. 2. Connect to your pressure washers or cleaning systems. Stay Green, Go Blu! Choose the 1000 litre IBC of EnviroBlu for your continuous cleaning operations, remote locations, and mobile solutions. Experience unparalleled efficiency, cost savings, and environmental stewardship with EnviroBlu. Together, we can build a cleaner, greener future.

Empowering Your ROV: Introducing Poseidon Robotics' Mini-HPU (Hydraulic Power Unit) At Poseidon Robotics, we are committed to pushing the boundaries of subsea exploration and ensuring that your ROV missions are equipped with cutting-edge technology. Our latest innovation, the Mini-HPU (Hydraulic Power Unit), is designed to deliver unmatched power and reliability, elevating the capabilities of your hydraulic manipulators and tools on larger ROVs. Compact Powerhouse Don't let the size fool you! The Mini-HPU may be compact, but it packs a powerful punch. With a robust 3 horsepower output, this little dynamo is built to handle the most demanding subsea tasks with ease. The Mini-HPU provides the muscle you need to operate hydraulic manipulators and tools on larger ROVs effectively. Integrated Efficiency Efficiency is the name of the game, and the Mini-HPU excels in this aspect. Integrated within its sleek design is a convenient 1-gallon reservoir, ensuring an uninterrupted flow of hydraulic fluid to keep your operations running smoothly. No need to worry about external reservoirs, as everything you need is perfectly contained within this powerful unit. Adjustable Pressure Relief and Replaceable Filters We understand the importance of adaptability in your subsea operations. The Mini-HPU features an adjustable pressure relief valve, allowing you to fine-tune the pressure to suit your specific needs. Additionally, we've equipped this hydraulic power unit with easily replaceable filters, ensuring that your system stays clean and optimized for peak performance. Reliability at Its Core At Poseidon Robotics, we believe in building products that stand the test of time. The Mini-HPU is no exception. Its high reliability fixed displacement pump ensures consistent and dependable performance, allowing you to focus on your mission without worrying about equipment failures. Unleash Your ROV's Potential With a maximum pressure of 2,500 PSI and a maximum flow of 1.6 gallons per minute (standard pump), the Mini-HPU is a formidable force in the subsea realm. It's designed to tackle a wide range of applications, from deep-sea exploration to intricate industrial tasks. Corrosion-Resistant Design The subsea environment can be harsh and unforgiving, but the Mini-HPU is ready for the challenge. Our engineers have crafted the unit with anodized aluminum, providing exceptional corrosion resistance and eliminating the need for additional paint coatings. Your Trusted Subsea Partner Poseidon Robotics takes immense pride in being a trusted partner for subsea robotics and ROV companies worldwide. The Mini-HPU is a testament to our commitment to delivering advanced solutions that elevate your capabilities and redefine what's possible in the underwater world. Experience the Mini-HPU Difference Ready to take your ROV missions to new depths? Explore the power and versatility of Poseidon Robotics' Mini-HPU and unlock a world of possibilities for your subsea operations. Contact us today and witness the next level of subsea performance with the Mini-HPU by your side.

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.

Powerful, Portable, and Versatile: Introducing the MMA 201 Welding Machine At Canaweld, we take pride in providing welders with top-notch equipment that delivers high-quality performance across a broad range of metals and thicknesses. Designed with the construction and oil & gas industries in mind, we are excited to present the MMA 201 - a welding machine that exceeds expectations in power, versatility, and durability. Powerful Performance on the Go The MMA 201 is your ultimate welding companion, offering the best-in-class duty cycle in its category. With a maximum current of 200A and the ability to deliver 160A with a 100% duty cycle, this welding machine provides the extra power you need to tackle challenging welding tasks all day long. Whether you're on a construction site or working in the oil & gas industry, the MMA 201 has got your back. Portable and Lightweight Design We understand the importance of mobility for welders on the go. That's why we've designed the MMA 201 to be portable and lightweight, making transportation effortless. The included carrying belt ensures ease of movement, allowing you to take this welding powerhouse wherever your work demands. Unmatched Versatility The MMA 201 is more than just a Stick Welding machine. It also excels in TIG welding with a lift start, providing you with the versatility to take on a wide range of welding applications. Whether you're working with steel, stainless steel, or aluminum, the MMA 201 delivers excellent arc characteristics with the most common rods up to 5/32 inches. Built to Withstand the Toughest Conditions The MMA 201 is tested in extreme conditions, proving its resilience in temperatures up to 104°F (40°C). Its rugged construction and large size Dinse style welding connectors ensure durability and reliability even in the harshest environments. Advanced Features for Effortless Welding With automatic hot start, arc force function, and electrode anti-sticking capabilities, the MMA 201 provides an unmatched welding experience. It's fan-cooled and thermally protected against overheating, safeguarding your equipment for long-lasting performance. Experience Excellence with Canaweld When you choose the MMA 201, you choose excellence backed by Canaweld's comprehensive 3-year warranty. Trust in a welding machine that's engineered to exceed your expectations and deliver the power, versatility, and durability you need. Empower your welding journey with the MMA 201 Welding Machine. Elevate your skills, tackle challenging projects, and take your welding to new heights with Canaweld. Your welding success begins with the MMA 201 - Where Power Meets Portability!

Drive Your Business Success with Dry Freight Van Leasing from CWB National Leasing Enhancing Logistics and Delivery Services with Flexible Leasing Options For businesses involved in logistics, distribution, and delivery services, dry freight vans are crucial for transporting goods safely and efficiently. Leasing dry freight vans through Canadian Western Bank (CWB) National Leasing presents an effective and financially strategic option. Here’s how leasing dry freight vans can benefit your business operations: 1. Quick Access to Essential Equipment CWB National Leasing understands the urgency of keeping your operations moving. Their leasing process is designed for speed, typically approving applications and notifying your equipment dealer about the payment within 48 hours. This swift service means you can have your dry freight vans delivered and operational quickly, minimizing any disruptions to your logistics chain. 2. Enhanced Financial Capability Leasing dry freight vans with CWB National Leasing empowers your business with increased buying power. It allows you to conserve cash by opting for periodic payments over a significant upfront investment. This approach frees up capital for other essential business activities. Additionally, you can customize your vans with extra features or accessories for a minimal increase in payments. 3. Balanced Cash Flow Management The lease structure, with smaller payments over the term, enables your dry freight vans to start generating revenue for your business while they are being paid off. This balanced financial approach helps maintain a healthy expense-to-revenue ratio, vital for long-term business stability and growth. 4. Flexible Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, to align with your business’s revenue cycle. This flexibility is particularly advantageous for businesses with variable income, ensuring that payments are manageable and tailored to your financial situation. 5. Potential Tax Advantages Leasing dry freight vans can offer tax benefits, such as allowing you to expense lease payments rather than capitalizing the cost of the equipment. Consulting with a tax advisor can provide insights into how leasing can enhance your business’s tax position. Conclusion Opting to lease dry freight vans through CWB National Leasing is a strategic move that equips your business with essential transportation equipment while maintaining financial agility. It ensures access to the necessary vehicles for your logistics and delivery operations without the financial strain of a large initial investment, paving the way for operational efficiency, business expansion, and increased profitability.

Introducing the SBP Solvable Bridge Plug from Marlin Oil Tools: A Revolutionary Approach to Temporary Well Barrier Solutions Marlin Oil Tools is proud to unveil the SBP Solvable Bridge Plug, an innovative downhole tool designed for the efficient and environmentally friendly isolation of oil and gas wells. Engineered with state-of-the-art materials that fully dissolve in downhole conditions, the SBP offers a temporary barrier solution that simplifies well intervention processes and enhances operational efficiency. Key Features of the SBP Solvable Bridge Plug: Eco-Friendly Dissolution: Designed to completely dissolve over time, the SBP eliminates the need for mechanical removal, reducing environmental impact and operational costs. Efficient Well Isolation: The plug is set using a hydraulic Setting Tool (STT), ensuring a quick and secure installation to create a reliable temporary barrier and isolate underlying intervals. Fully Soluble Materials: Constructed from entirely soluble materials for both collets and the sealing element, ensuring that the plug will fully disintegrate without leaving residue. Field-Proven Reliability: The effectiveness and reliability of the SBP Solvable Bridge Plug have been rigorously tested and confirmed through extensive field work, offering peace of mind in its performance. Optimized for Oil and Gas Wells: Specifically tailored for use in oil and gas wells, the SBP is an ideal solution for operators seeking to enhance well management and operational flexibility. Streamlined Operations: By dissolving directly in the well, the SBP streamlines the workflow, eliminating the need for follow-up interventions for plug removal. Maximize your operational efficiency and environmental stewardship with the SBP Solvable Bridge Plug from Marlin Oil Tools, a leading-edge solution engineered for temporary well isolation in the oil and gas industry. Utilizing fully soluble materials that dissolve in downhole conditions, the SBP offers a reliable, cost-effective, and eco-friendly alternative to traditional bridge plugs. Set with a hydraulic Setting Tool (STT), this plug is designed to create an effective barrier and then dissolve, simplifying well interventions and eliminating the need for mechanical removal. Choose the SBP Solvable Bridge Plug for its field-proven reliability, operational efficiency, and commitment to environmental sustainability. Why Choose the SBP Solvable Bridge Plug from Marlin Oil Tools? Sustainable Well Management: Provides an environmentally friendly solution that reduces the ecological footprint of well operations. Cost-Effective Operations: Eliminates the expense and time associated with traditional plug removal, enhancing operational efficiency. Reliable Temporary Isolation: Ensures secure and effective temporary well isolation, supporting a wide range of intervention tasks. Proven in Field Applications: Backed by rigorous field testing, the SBP offers reliability and peace of mind for operators. The SBP Solvable Bridge Plug by Marlin Oil Tools represents the cutting edge in downhole tool technology, providing oil and gas operators with a smart, sustainable, and efficient solution for well isolation. Incorporate the SBP into your operations to benefit from its innovative design, operational excellence, and environmental benefits.

Navigating Through Technological Challenges: Nulux Offers Unparalleled DCS Infrastructure Technical Support In the fastidious realm of the oil and gas industry, a well-oiled Distributed Control System (DCS) isn’t just an ancillary asset; it’s the digital backbone supporting the streamlined operations, analytical assessments, and safety protocols so critical in such a challenging environment. With Nulux Network Solutions at your helm, not only is your DCS infrastructure skillfully designed and implemented, but its continual functionality is upheld through our impeccable technical support. Nulux: A Beacon of Robust Networking in the Industrial Sector With a prestigious track record of over two decades, Nulux Network Solutions spearheads the industry in telecommunication and networking solutions. We’ve diligently crafted, upgraded, and meticulously maintained a myriad of copper cabling systems, including telephone, ethernet, coax, and hybrid networks, to ensure your industrial projects always remain a step ahead technologically. Our specialization extends beyond mere installation and permeates every aspect of network management, providing you a comprehensive turnkey solution. With our eyes fixed on providing unparalleled service quality, we've carved our niche, particularly in upgrading and maintaining DCS networks, proving time and time again that when it comes to networking, we're a name you can trust. Technical Support that Speaks Volumes We don’t just stop at providing you a stellar DCS infrastructure; our technical support is always at your beck and call, ensuring that your network runs seamlessly, uninterrupted, and continues to facilitate operational excellence. Here’s how our Technical Support stands apart: 24/7 Availability: In an industry that never sleeps, our technical support is available round the clock, ensuring that help is always a call away. Expert Troubleshooting: With a team adept in diagnosing and resolving issues swiftly, any disruptions are promptly addressed, minimizing downtime and keeping your operations in perpetual motion. Life Cycle Management: From planning and implementation to upgrades and maintenance, our support encompasses every phase, ensuring your DCS infrastructure continually evolves and aligns with technological advancements. Tailored Solutions: Understanding that no two networks are identical, our solutions are customized, catering to the specificities of your DCS infrastructure, providing targeted, effective, and efficient support. Why Our Copper Network Reigns Supreme Our copper network doesn’t just promise high-bandwidth transmission and long-term reliability; it assures your DCS infrastructure is equipped with a network that is inherently: Cost-Effective: Ensuring you don’t have to compromise quality for cost. Flexible and Durable: Capable of withstanding the demanding operational environment and evolving in tandem with your expanding needs. Easily Terminated: Allowing for swift modifications and expansions as per operational demands. Ensuring Your Success is Uninterrupted with Nulux In the multifaceted world of the oil and gas industry, ensuring that your business is equipped with an unshakeable DCS infrastructure, backed by an unwavering support system, isn’t just beneficial; it’s quintessential. With Nulux Network Solutions, you’re not merely adopting a network; you’re embracing a partnership where your success becomes a shared objective. Engage with Nulux and explore how our unparalleled DCS infrastructure technical support can ensure that your operations never falter, your network never falters, and your success story continues unabated. Contact us today for a consultation that will pave the way toward a technologically fortified future.

Half moon sheaves are designed to be used in conjunction with Sivam spooling units. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage.

Maximize Charging Efficiency with the CSA 120 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to present the CSA 120 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-120BC), a large-scale charging solution designed for operations that demand quick and efficient charging of a high volume of equipment. This charger rack is perfect for extensive mining operations, large construction sites, and industrial settings where time and space are of the essence. High-Capacity, Rapid Charging The CSA 120 Unit Charger Rack is engineered to meet the needs of large teams, offering rapid charging times of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This fast charging capability is crucial for operations where equipment must be ready for continuous use, ensuring minimal downtime and maximum productivity. Designed for Space Efficiency Despite its large capacity, the CSA charger rack is designed to be space-efficient. It’s an ideal solution for organizations that need to manage a significant number of devices but have limited space. This single-sided charger rack can be easily placed in equipment rooms or centralized charging stations, optimizing your workspace. Easy Access and User-Friendly The non-locking feature of this charger rack offers easy and quick access to all charging ports, making it straightforward to manage multiple devices. This design is particularly beneficial in dynamic work environments where quick equipment turnaround is essential. Durable and Reliable for Industrial Use Constructed with durability in mind, the CSA 120 Unit Charger Rack is built to withstand the demanding conditions of mining and industrial environments. Its robust construction ensures it can provide reliable performance over time, making it a smart investment for large-scale operations. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and equipment rental providers who need to charge a substantial number of devices efficiently. Its high capacity and fast charging capabilities make it an indispensable tool for operations of considerable size. Upgrade Your Charging Station Equip your operation with the Wisdom CSA 120 Unit Non-Locking FAST Charger Rack from Provix. Visit our website at www.provix.net to discover more about this high-capacity, efficient charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions.

Introducing the Revolutionary MIG Gun M250 Series: Your Ultimate Welding Companion When it comes to heavy-duty, durable, and high-performance MIG guns, look no further than the Canaweld M250 Series. Crafted with precision and innovation, this newly designed MIG gun sets a new standard in the welding industry. Engineered to meet the demands of the oil and gas industry, the M250 Series will transform the way you weld, offering unmatched versatility, comfort, and efficiency. Built for Excellence - Unleash the Power of Adaptability The M250 MIG gun boasts a unique and cutting-edge feature that sets it apart from the rest - the ability to convert termination styles seamlessly. With a simple replacement, you can switch between Euro style, Lincoln® style, Tweco® style, or Miller® style, ensuring compatibility with various welding machines. This adaptability makes the M250 Series a true game-changer for welders, offering unmatched flexibility in their welding projects. Unrivaled Features - Mastering Welding Precision Let's dive into the exceptional features of the Canaweld M250 Series: 1. Knuckle Joint: Experience improved balance and position-ability as the handle and neck move independently of the cable assembly. Weld with greater precision and control. 2. Durable Cable: The M250 MIG gun boasts excellent heat, abrasion resistance, and flexibility in its cable. It's lighter than standard cable sets and can withstand over 1 million flexes in life testing, ensuring it stands the test of time. 3. Premium Contact Tips: Crafted from premium grade copper alloys, the contact tips are extremely durable, offering superior performance and efficiency. 4. High-Quality Accessories: Choose from a range of durable and high-performance options for tip adaptors, diffusers, and swan necks, tailoring your MIG gun to suit your specific needs. 5. Ergonomic Handle Design: Enjoy comfortable handling with the ergonomic design of the handle, reducing welder fatigue and promoting longer welding sessions. 6. Air Gap Technology: The M250 MIG gun utilizes air gap technology for cooler running handles and better heat transfer isolator from the swan neck, ensuring efficient and effective welding. 7. Versatile Liner: The steel and combo liner cater to all types of wires, including steel (metalcore and flux-cored), stainless steel (metalcore and flux-cored), and aluminum, making it suitable for a wide range of welding applications. 8. Effective Sealing: The unique sealing ring ensures effective sealing of impurities, particularly in the argon gas process, promoting cleaner welds. 9. Push-on Nozzle System: Easily adjust nozzle stick-out with the push-on nozzle system, streamlining your welding workflow. 10. High-Quality Trigger: The M250 MIG gun comes with a high-quality trigger that boasts a life expectancy of over 1 million cycles, offering durability and reliability in every weld. Elevate Your Welding Experience with Canaweld M250 Series At Canaweld, we strive to empower welders with the latest advancements in welding technology. The M250 Series is a testament to our commitment to excellence, providing welders with a powerful, versatile, and comfortable welding solution. Experience the future of welding with the Canaweld M250 Series - Your Ultimate Welding Companion!

Boost Your Construction Efficiency with Skid Steer Leasing from CWB National Leasing Transform Your Construction Projects with Flexible Equipment Solutions In the fast-paced world of construction, having versatile and reliable equipment like skid steers can make a significant difference in project efficiency and execution. Canadian Western Bank (CWB) National Leasing offers an attractive and practical solution for businesses looking to lease skid steer equipment. Here's how leasing skid steers can amplify your construction capabilities: 1. Rapid Equipment Availability CWB National Leasing values your project timelines, offering a quick and efficient leasing process. They typically approve lease applications and notify your equipment dealer about payment within 48 hours. This speed ensures that your skid steer is delivered and ready for action in no time, helping you keep your construction projects on track. 2. Enhanced Financial Flexibility Leasing skid steers with CWB National Leasing enhances your buying power. It allows you to allocate funds more effectively by choosing manageable periodic payments over a substantial upfront purchase. This approach frees up capital for other critical business needs. Additionally, you can upgrade your skid steer with additional features or accessories for a small increase in your payments. 3. Optimized Cash Flow Management Smaller lease payments spread over the term of the lease mean that your skid steer starts contributing to your business’s revenue while it’s still being paid off. This balanced approach is essential in maintaining a healthy expense-to-revenue ratio, crucial for business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses that experience seasonal fluctuations in income, ensuring that payments align with your financial capacity. 5. Potential Tax Advantages Leasing skid steers can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the equipment cost. Consulting with a tax advisor is recommended to explore how leasing can enhance your business’s tax position. Conclusion Opting to lease skid steer equipment through CWB National Leasing is a smart business decision that provides your construction operations with essential tools while maintaining financial agility. It ensures access to state-of-the-art skid steers, vital for efficient and effective construction operations, without the financial strain of a large upfront investment. This approach paves the way for enhanced operational capabilities, growth, and profitability in your construction business.

SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability At Poseidon Robotics, we understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.