Hydraulic Spooling Unit

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Introducing the SBA Straight Bar from Marlin Oil Tools: The Essential Downhole Tool for Enhanced Well Intervention Precision Marlin Oil Tools proudly presents the SBA Straight Bar, a specially designed downhole tool that revolutionizes well intervention operations. As an integral part of the Bottom Hole Assembly (BHA), the SBA Straight Bar addresses the critical challenge of coil tubing deformation, ensuring a straighter and more effective pathway for well intervention tools. Key Features of the SBA Straight Bar: Enhanced BHA Stability: The SBA Straight Bar provides the necessary rigidity and straightness to the BHA, minimizing the risk of deformation and ensuring smoother operations. Improved Wellbore Navigation: By maintaining a straighter path, the SBA Straight Bar significantly reduces the chances of the BHA resting against the well walls or encountering obstacles during transitions. Optimal Centering: Its rigid and straight design aids in better centering of the BHA within the wellbore, crucial for the precision of well intervention tasks. Seamless Passage: The SBA Straight Bar facilitates seamless passage through wellbore expansions and recessions, including critical points like blowout preventers, enhancing operational safety and efficiency. Versatile Integration: Designed for easy integration into any BHA configuration, the SBA Straight Bar is suitable for a wide range of well intervention activities, offering unparalleled adaptability. Elevate your well intervention strategies with the SBA Straight Bar from Marlin Oil Tools, a leading-edge solution designed to combat coil tubing deformation and ensure precise downhole operations in the oil and gas industry. The SBA Straight Bar enhances BHA stability, improves wellbore navigation, and ensures optimal centering and seamless passage through wellbore transitions. This tool is an indispensable addition to your BHA, providing the rigidity and straightness necessary for effective well intervention. Choose the SBA Straight Bar for a reliable, efficient, and versatile solution to well intervention challenges. Why Choose the SBA Straight Bar from Marlin Oil Tools? Superior Operational Precision: Ensures straighter coil tubing pathways for enhanced precision in well intervention tasks. Increased Operational Safety: Minimizes the risk of BHA hang-ups and obstructions, ensuring safer operations. Adaptability to Well Conditions: Capable of navigating through complex well architectures, including areas of expansion and recession. Streamlined Well Intervention: Promotes smoother, faster, and more efficient well intervention procedures. The SBA Straight Bar by Marlin Oil Tools represents the forefront of downhole tool technology, providing operators with the means to enhance well intervention accuracy and operational success. Incorporate the SBA Straight Bar into your well intervention toolkit to achieve superior performance and outcomes.

Unlocking Efficiency in Downhole Operations: HOCA Oil Tools B.V.'s Advanced Slickline Swivel Joints In the dynamic landscape of downhole operations, the role of slickline swivel joints becomes pivotal in ensuring seamless, efficient, and safe wireline operations. HOCA Oil Tools B.V., a renowned name in the oil and gas industry, stands at the forefront of delivering cutting-edge slickline solutions. Our array of slickline swivel joints is designed to meet and exceed the operational demands and challenges faced by our clients. Pioneering Slickline Swivel Joints: HOCA Oil Tools B.V. offers an extensive range of slickline swivel joints, including the Type ‘HO’ and ‘HD’ swivel joints, engineered to minimize wireline twisting during downhole operations. This not only enhances safety but also improves operational efficiency by reducing the risk of wireline entanglement and breakage. Key Benefits of Our Slickline Swivel Joints: Reduced Wireline Twisting: Our swivel joints significantly reduce the twisting of wireline, thus minimizing the risk of operational downtime and wire breakage. Enhanced Operational Safety: By preventing wireline kinks and twists, our swivel joints contribute to safer downhole operations, protecting both personnel and equipment. Increased Efficiency: Smooth wireline operations ensure quicker job completion and reduced non-productive time. Durability and Reliability: Made from high-grade materials, our swivel joints withstand harsh downhole conditions, ensuring long service life and reliability. Versatility: Available in various sizes and configurations, our swivel joints cater to a wide range of downhole requirements and wireline types. Ease of Integration: Designed for easy integration into existing tool strings, our swivel joints facilitate seamless operations without the need for extensive modifications. Main Features of HOCA's Slickline Swivel Joints: Type ‘HO’ Swivel Joint: Designed to minimize wireline twisting, available in sizes from 1” to 2 1/2", with threaded connections for easy installation. These swivel joints feature top sub, pin, ball connector, ball sub, and bottom sub components, ensuring robust performance and ease of maintenance. Type ‘HD’ Swivel Joint: Similar to the Type ‘HO’ but designed for even more demanding environments, with ‘QLS’ - ‘RQLD’ connections, providing additional strength and durability. These swivel joints are also available in sizes from 1 1/2” to 2 1/2", tailored for heavy-duty operations. At HOCA Oil Tools B.V., we understand the complexities of downhole operations. Our slickline swivel joints are a testament to our commitment to innovation, safety, and efficiency. Embrace the future of wireline operations with HOCA, where performance meets reliability. Contact us today to learn more about how our slickline solutions can optimize your operations.

Unlock Excellence with ALCiT: Proud Partners with IBM In the realm of technology, partnerships are the cornerstone of innovation. ALCiT stands shoulder to shoulder with industry giant IBM, bringing you a new era of unparalleled software solutions. Welcome to a world where success is defined by the best-in-class, where security knows no rivalries. Unleashing the Power of IBM's Software Portfolio IBM's software portfolio isn't just a collection – it's a testament to innovation and excellence. From the breadth of their offerings to the depth of their security solutions, IBM stands as a market leader, rewriting the rules of what's possible. Your Vision, Our Expertise At ALCiT, we're not just taking IBM's products; we're transforming them into tools that empower your business. It's not just about technology; it's about making technology work for you. Our mission is clear: we harness the power of IBM's advanced products and mold them into solutions that drive your success. Effortless Advancement via 'As a Service' We understand that innovation shouldn't be a burden. In fact, it should be seamless. That's why most of our solutions are offered through an 'as a Service' model. You reap the benefits without the complexities, allowing your team to focus on what truly matters – your core business. Elevating Your Business with IBM's Solutions Let us paint a picture of what IBM's products can achieve for your business: Enhanced Security: Security isn't just a feature; it's a necessity. IBM's security solutions stand unrivaled, ensuring your digital fortress is impenetrable against evolving threats. Efficiency Amplified: IBM's solutions streamline operations, boosting efficiency and productivity. With ALCiT as your partner, you'll experience newfound operational excellence. Innovation Unleashed: From cutting-edge analytics to cloud solutions, IBM's offerings redefine innovation. We take these solutions and tailor them to your unique needs, ensuring they align with your vision. Secure Today, Elevate Tomorrow ALCiT and IBM are more than just names; we're your pathway to success. Experience the best-in-class, redefine security, and elevate your business to new heights. Discover the power of ALCiT's partnership with IBM.

Unleashing the Power of Customization: Introducing Poseidon Robotics' Geotechnical ROV Tooling Skid At Poseidon Robotics, we understand that every subsea mission is unique, and each underwater challenge demands a tailored approach. That's why we are thrilled to present our latest innovation - the Custom Designed Geotechnical ROV Tooling Skid. This revolutionary tooling solution empowers you to optimize your ROV's capabilities for geotechnical exploration like never before. Designed for Your Mission No two subsea projects are alike, and we believe that your equipment should reflect that. Our Geotechnical ROV Tooling Skid is designed with customization at its core. Our team of experts works closely with you to understand the specific requirements of your mission, ensuring that the tooling skid is precisely tailored to suit your needs. Versatility Redefined The Geotechnical ROV Tooling Skid is engineered to be highly versatile, accommodating a wide range of geotechnical tasks. From seabed sampling and sediment coring to geophysical surveying and subsea drilling, this tooling skid is your ultimate companion in the quest for understanding the ocean floor. Precision and Control When it comes to geotechnical operations, precision is paramount. Our tooling skid is equipped with state-of-the-art controls that offer you unparalleled accuracy and maneuverability. You'll have complete control over your ROV's movements, allowing you to navigate complex terrains with ease. Robust and Reliable Durability and reliability are critical in the challenging subsea environment. We take great pride in the craftsmanship of our Geotechnical ROV Tooling Skid, ensuring that it can withstand the rigors of deep-sea missions. Built with high-quality materials and cutting-edge engineering, this tooling skid is built to last. Expandable and Future-Proof We understand that subsea exploration is an evolving field, and your equipment should be able to keep up with advancements. Our Geotechnical ROV Tooling Skid is designed to be expandable and future-proof. As your mission requirements evolve, the tooling skid can be easily adapted to integrate new sensors, tools, or functionalities. Unmatched Expertise Poseidon Robotics boasts a team of seasoned experts in subsea robotics and ROV technology. With years of industry experience, our engineers and technicians have an in-depth understanding of the challenges faced in the subsea domain. You can trust us to deliver a custom-designed tooling skid that aligns perfectly with your project's objectives. Your Partner in Subsea Excellence At Poseidon Robotics, we take pride in being your partner in subsea excellence. Our commitment to innovation, quality, and customer satisfaction drives us to deliver cutting-edge solutions that transform the way you explore the ocean's depths. Unleash Your ROV's Potential Are you ready to revolutionize your geotechnical exploration capabilities? Unlock the power of customization with Poseidon Robotics' Geotechnical ROV Tooling Skid. Let us work together to design a tooling solution that matches your mission's unique requirements. Contact us today to embark on a new era of subsea possibilities.

Introducing the revolutionary slim design composite plug from ID OILTOOLS – the "Long Range" Composite Frac Plug! With its advanced engineering, this plug is designed to pass through damaged casing, restricted internal casing diameters, and existing casing patches in the wellbore. Now, you can get more from every investment with this cost-effective option for both vertical and horizontal wells. The "Long Range" plug features a unique pump-down element design that requires less fluid and pump pressure to deploy the plug horizontally. It is made with better materials for better results, incorporating composite material and aluminum construction. This makes it possible for wells previously marked for abandonment to be re-completed, increasing overall production and profitability. Our composite frac plug can be configured as a Ball Drop or Bridge Plug, and it can be deployed on wireline or coiled tubing. Its dependable cast iron slips secure the plug in place, and the positive lock-up feature ensures lock-up of multiple plugs in a single wellbore. Plus, custom O.D. is available upon request. Don't miss out on this patented technology that has already proven its success. Choose ID OILTOOLS for the Long Range Composite Frac Plug and experience the next level of downhole solutions.

Introducing Sivam's Electric Heater Units: The Solution for Improved Oil Flow! Our cutting-edge technology is designed to increase the temperature of oil, resulting in reduced viscosity and improved oil flow. It's the perfect solution for industries that require consistent and efficient heating for their oil-based applications. Sivam's Electric Heater Units are built with durability and reliability in mind. Our state-of-the-art technology ensures that your oil is heated to the perfect temperature quickly and efficiently, with minimal energy consumption. This means you can enjoy the benefits of improved oil flow while also saving on energy costs. Our Electric Heater Units are specifically designed to improve the flow of your oil, regardless of its viscosity. With our units, you can maintain consistent oil temperatures throughout your system, ensuring optimal performance and efficiency. This is especially important for industries such as oil and gas, where maintaining consistent oil temperatures is critical to operations. At Sivam, we pride ourselves on providing exceptional customer service and support. Our team of experts is always available to assist you with any questions or concerns you may have, ensuring that you get the most out of your Electric Heater Unit. In addition to their efficiency and reliability, Sivam's Electric Heater Units are also built with safety in mind. Our units are equipped with advanced safety features to ensure that your employees and equipment are protected at all times. Overall, Sivam's Electric Heater Units are the perfect solution for industries that require improved oil flow and consistent oil temperatures. With their cutting-edge technology, reliability, and safety features, you can trust that Sivam's Electric Heater Units will exceed your expectations. Contact us today to learn more about how our Electric Heater Units can benefit your business.

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage.

Precision in Every Shot: InWaTec Combined’s E-line Wireline Conveyed Perforating Services InWaTec Combined is at the vanguard of well perforation technology, offering sophisticated E-line Wireline Conveyed Perforating Services that stand as a testament to our commitment to operational excellence and innovation. In the realm of well completion and stimulation, the strategic deployment of perforating guns is crucial, and the use of wireline—or electric line—has been the traditional and preferred method for this critical operation. The rationale behind the enduring preference for wireline-perforated wells is multifaceted: Real-Time Depth Control: With wireline, our experts can ensure that perforations are placed precisely where they need to be, optimizing the flow of hydrocarbons and enhancing well productivity. Selective Perforation: The ability to select specific zones for perforation is a significant advantage, especially in complex reservoirs with multiple pay zones. Reduced Logistics: Compared to tubing deployment, wireline operations require less equipment on site, translating into a leaner, more cost-effective operation. Historically, wireline perforating guns were classified based on their application relative to the completion process—whether as casing guns used before the completion is run, or as through-tubing guns utilized through the completion. However, the landscape has evolved. Today, InWaTec Combined harnesses the flexibility of wireline to run any type of engineered perforating system, alongside a broad spectrum of explosive devices, tailored to the bespoke needs of each well. At InWaTec Combined, our E-line Wireline Conveyed Perforating Services are not a one-size-fits-all solution. We recognize that each well is unique, with its own set of geological, technical, and operational considerations. Therefore, we offer customized perforating strategies that maximize well potential and align with our clients' production objectives. Our arsenal of wireline-conveyed perforating tools includes the latest in shaped-charge technology, ensuring clean and deep perforations for optimal reservoir connectivity. With these advanced tools at our disposal, we can overcome the challenges presented by any well environment, whether requiring high shot density, deep penetration, or specific orientation. Choosing InWaTec Combined for your wireline conveyed perforating needs means opting for a partner who prioritizes precision, efficiency, and safety. Our services are designed to minimize the time between perforation and production, ensuring that your operations transition smoothly and swiftly to the production phase. Trust InWaTec Combined to deliver wireline conveyed perforating services that are not just about making holes—they're about opening pathways to prosperity. Let us bring our precision-perforating expertise to your wellsite, and together, we'll unlock the full potential of your reservoirs.

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Well Treatment Efficiency! Are you ready for a game-changing solution in well treatment? Look no further than Thru-Tubing Acid Stimulation by StimStixx Technologies. Our innovative product offers quick and easy deployment via electric wireline, providing you with a seamless experience from start to finish. We offer two powerful options to meet your specific needs: HCL and HCL/HF acid blends. With our specially formulated solid acid stick, delivered through slickline, wireline, coil tubing, or tractor conveyance, we ensure heated acid vapor is precisely directed to the zone of interest, providing pinpoint accuracy. The secret behind our success lies in the highly reactive nature of our heated acid vapor. It penetrates contaminants and carbonate scale with increased efficiency, resulting in enhanced contact with the formation. The vapor quickly vaporizes and becomes fully spent down-hole, thanks to its high reactivity and relatively low volume. This unique feature eliminates the need for post-treatment clean-up or disposal, ensuring a cleaner and safer operation. But the benefits don't stop there. Thru-Tubing Acid Stimulation offers numerous advantages that will transform your well treatment process. Our technology reduces CO2 emissions, helping you contribute to a greener future. With reduced downtime and simple implementation, you can save valuable time and resources. The increased precision of our product guarantees optimal results, while its fast-acting nature ensures efficient operations. Lower manpower, rig, and equipment costs further enhance the cost-effectiveness of our solution. Additionally, you can bid farewell to worries about corrosion and wear on machinery, as our product minimizes these concerns. And with no surface spillage and reduced exposure to hazardous materials, safety becomes a top priority. Join the Thru-Tubing Acid Stimulation revolution today and experience the unparalleled efficiency and effectiveness of StimStixx Technologies. Trust us to elevate your well treatment process to new heights.

Introducing the PDM (Positive Displacement Motor) from Marlin Oil Tools: The Ultimate Downhole Tool for Enhanced Coil Tubing Operations Marlin Oil Tools is proud to unveil the PDM (Positive Displacement Motor), a revolutionary downhole tool designed to maximize efficiency in coil tubing operations across the oil and gas industry. Engineered to convert the flow energy of pumping fluid into rotational force, the PDM is essential for a range of operations, from milling and cleanouts to supporting mechanical tubing cutters and Venturi junk baskets. Key Features of the PDM (Positive Displacement Motor): Energy Conversion: The PDM's main function is to transform pumping fluid energy into the rotation of the bearing mandrel, optimizing the performance of downhole tasks. Versatile Applications: Ideal for milling, cleanout operations, and as a driving force for mechanical tubing cutters and Venturi junk baskets, enhancing operational flexibility. Dual-Section Design: Comprises a robust bearing section and a power section, each designed to withstand the demands of downhole environments. Innovative Power Section: Features a stator with an inner spiral surface and a rotor with an outer spiral surface, ensuring efficient energy conversion and consistent torque. Continuous Tool Rotation: Guarantees that any tool installed below the motor receives continuous rotation, improving operational efficiency and effectiveness. Optimized for Coil Tubing: Specifically tailored for integration into the BHA during coil tubing operations, ensuring seamless performance and reliability. Elevate your coil tubing operations with the PDM (Positive Displacement Motor) from Marlin Oil Tools, a cutting-edge solution designed to transform fluid energy into mechanical rotation, optimizing downhole tasks. Whether it's milling, cleanouts, or supporting other downhole tools, the PDM enhances operational flexibility and efficiency. With its innovative power section and robust bearing assembly, the PDM ensures consistent tool rotation and performance, making it an indispensable tool for the oil and gas industry. Choose the PDM from Marlin Oil Tools for unparalleled efficiency and reliability in your downhole operations. Why Choose the PDM from Marlin Oil Tools? Enhanced Milling and Cleanout Efficiency: Specifically engineered to boost performance in critical downhole tasks. Broad Operational Flexibility: Compatible with a variety of tools and tasks, ensuring adaptability to your operational needs. Reliable Performance: Designed with durable components that guarantee consistent operation and longevity. Seamless Integration: Easily integrates into your existing BHA setup, providing a smooth operation during coil tubing interventions. The PDM (Positive Displacement Motor) by Marlin Oil Tools represents the forefront of downhole tool technology, offering oil and gas operators a powerful tool for improving efficiency and outcomes in well interventions. Incorporate the PDM into your operations to achieve superior results and operational excellence.

Enhance Your Cutting Precision with Plasma Machine Leasing from CWB National Leasing Streamlining Your Fabrication Process with Flexible and Advanced Equipment Solutions For businesses involved in metalworking, fabrication, or automotive industries, plasma cutting machines are essential for precise and efficient cutting operations. Leasing plasma machines through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their cutting capabilities. Here’s how leasing plasma machines can benefit your business: 1. Quick Access to High-Precision Equipment Understanding the need for efficient and precise cutting operations, CWB National Leasing provides a rapid leasing process. With decisions typically made within 48 hours of application submission, your plasma machines can be delivered and operational quickly, minimizing downtime and boosting productivity. 2. Increased Financial Flexibility Leasing plasma machines with CWB National Leasing enhances your financial power. It enables you to spread costs over manageable periodic payments rather than a substantial initial purchase, freeing up capital for other essential business operations. The option to add extra features or accessories to your machines for a small payment increase allows for customization to meet specific production demands. 3. Effective Cash Flow Management Manageable lease payments over the term mean your plasma machines start contributing to your business’s revenue while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, essential for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing plasma machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease plasma machines through CWB National Leasing is a strategic decision that equips your business with essential cutting equipment while maintaining financial flexibility. It ensures access to advanced plasma machines, vital for precise and efficient metal cutting, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business excel in the competitive metalworking and fabrication industry.

Optimize Your Material Handling with Conveyor Leasing from CWB National Leasing Streamlining Your Operations with Flexible and Efficient Equipment Solutions For businesses in manufacturing, logistics, warehousing, or any sector requiring efficient material handling, conveyors are essential tools for streamlining operations. Leasing conveyors through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution to enhance your material handling capabilities. Here’s how leasing conveyors can benefit your business: 1. Rapid Equipment Deployment CWB National Leasing prioritizes the efficiency of your operations. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This rapid turnaround ensures that your conveyors can be delivered and operational quickly, minimizing downtime and enhancing your operational efficiency. 2. Enhanced Financial Flexibility Leasing conveyors with CWB National Leasing increases your buying power. Opting for periodic payments over a significant initial purchase frees up capital for other critical business areas. The option to add extra features or accessories to your conveyors for a small payment increase allows for customization to meet specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term allow your conveyors to start contributing to your business’s revenue while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is crucial for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial capacity. 5. Potential Tax Advantages Leasing conveyors can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease conveyors through CWB National Leasing is a strategic decision that equips your business with essential material handling equipment while maintaining financial flexibility. It ensures access to high-quality conveyors, vital for efficient operations across various industries, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved productivity, and increased profitability, helping your business to excel in a competitive market.

Introducing the Innovative ESC (External Slip Type Connector) by Marlin Oil Tools: Your Solution for Reliable Coiled Tubing Connections in the Oil and Gas Industry Marlin Oil Tools is at the forefront of delivering cutting-edge solutions tailored for the dynamic needs of the oil and gas sector. Our latest innovation, the ESC (External Slip Type Connector), is designed to revolutionize well intervention operations by providing a secure and efficient method to connect the smooth lower end of coiled tubing (CT) to any downhole tool. Here’s why the ESC stands as a pivotal advancement in coiled tubing technology: Key Features of the ESC (External Slip Type Connector): Innovative Connection Design: The ESC boasts an internal collet mechanism with inward-pointing teeth, ensuring a tight grip on the smooth outer wall of the CT. This design guarantees a secure connection, vital for the successful execution of well intervention jobs. Enhanced Sealing Capabilities: Equipped with two O-rings made from the highly durable FKM 90 material, the ESC offers exceptional sealing, isolating the internal space of the connector from the annulus. This feature is crucial for maintaining the integrity of well operations and preventing fluid leakage. Robust and Reliable: The use of a trapezoidal thread in conjunction with high-quality metals provides a connection that is not only reliable but also capable of withstanding the rigorous demands of downhole activities. The ESC is built to ensure the safety and efficiency of well work. Versatile Tool Connection: The lower housing of the ESC features a standard working taper thread, making it compatible with a wide range of downhole tools. This versatility allows for seamless make-up and enhances the tool's utility across various well intervention scenarios. Marlin Oil Tools presents the ESC (External Slip Type Connector), an essential coiled tubing tool for oil and gas well intervention. Designed to securely link the smooth lower end of CT to threaded downhole tools, the ESC is engineered for reliability and efficiency. Featuring an internal collet with inward-pointing teeth for a firm grip, and dual O-rings made from FKM 90 for superior sealing, this connector ensures operational integrity. With its trapezoidal thread and high-quality metal construction, the ESC stands as a beacon of durability in harsh downhole environments. Its standard working taper thread accommodates various downhole tools, making it a versatile addition to your well intervention arsenal. Why Choose the ESC from Marlin Oil Tools? Security and Efficiency: The ESC’s innovative design ensures a secure connection between coiled tubing and downhole tools, optimizing well intervention operations. Superior Sealing: With its advanced sealing capabilities, the ESC prevents fluid leakage, protecting the well's integrity. Durability: Built with high-quality materials and a robust thread design, the ESC is designed to endure the toughest downhole conditions. Versatility: Its compatibility with a broad range of downhole tools makes it a flexible solution for various well intervention needs. Elevate your well intervention operations with the ESC (External Slip Type Connector) from Marlin Oil Tools. Contact us today to discover how our solutions can enhance your efficiency and operational success in the oil and gas industry.

A SIMPLE WATER-TO-WIRE SOLUTION This micro hydro solution is based on both proprietary designs in the turbine and drivetrain, and off-the-shelf components, to deliver a complete water-to-wire system. This solution is a self-contained module made of single or twin turbines, generators, electrical cabinet, and is connectable to BOP/Grid. They are assembled and mounted in a self-stabilized concrete structure requiring no civil works. The system power output is 480 V, 3-phase AC, 50 Hz & 60 Hz. This new, highly cost-effective, renewable energy solution, capable of capturing most of the untapped energy on your site, has many assets. Its performance levels have been tested both in laboratory and on site. Actual power rating and instantaneous output depend mainly on water velocity (>1 m/s). In our catalogue of product, we can select the best options to suit a particular site. This technology is scalable by equipping an existing canal with dozens or hundreds of 5 to 15 kw modules. Land usage Turbines are installed on existing, untapped water infrastructures. No land planning is needed, with no modification required on existing assets. Predictable and available Permanent, predictable and controllable production with 95% availability. *information from manufacturer

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Introducing the MGN Radial Downhole Magnet from Marlin Oil Tools: Your Premier Solution for Well Cleaning and Metal Debris Removal Marlin Oil Tools is proud to unveil the MGN Radial Downhole Magnet, a highly efficient downhole tool designed specifically for the oil and gas industry to address the critical need for well cleaning and maintenance. Engineered to remove small metal debris, such as chips and scale, the MGN Radial Downhole Magnet is essential for maintaining well integrity and preventing operational complications. Key Features of the MGN Radial Downhole Magnet: Efficient Debris Removal: Utilizes a powerful radial magnetic field to capture and remove small metal debris accumulated during the operation of metal tools and milling operations. Prevention of Operational Complications: By extracting small metal parts and foreign objects, the MGN Radial Downhole Magnet minimizes the risk of well complications or accidents, ensuring smoother operations. Versatile Design: Features various designs with magnetic surfaces located along the tool body or from the end, tailored to maximize debris capture efficiency. Simultaneous Well Flushing Capability: Equipped with an internal passage hole, it allows for well flushing simultaneously with magnet operation, enhancing cleaning efficiency. Customizable Connections: Offers the flexibility to manufacture any connecting threads as per customer requirements, ensuring compatibility with existing downhole tool configurations. Crucial for Well Preparation: Acts as a vital step in well work preparation, ensuring a clean operational environment free from hazardous metal debris. Elevate your well maintenance regime with the MGN Radial Downhole Magnet from Marlin Oil Tools, a leading-edge solution crafted for the effective removal of metal debris in oil and gas wells. This downhole magnet, engineered for precision and efficiency, safeguards your well operations against potential complications caused by foreign metal objects and accumulated debris. With its versatile design and simultaneous well flushing capability, the MGN Radial Downhole Magnet is indispensable for any well intervention or maintenance activity. Opt for Marlin Oil Tools’ customizable and reliable downhole magnet to ensure your well remains clean, safe, and productive. Why Choose the MGN Radial Downhole Magnet from Marlin Oil Tools? Targeted Debris Removal: Optimized for capturing a wide range of metal debris, ensuring a clean wellbore. Operational Safety: Significantly reduces the risk of well operation complications and accidents. Enhanced Cleaning Efficiency: Simultaneous flushing feature streamlines well cleaning processes. Flexible and Compatible: Customizable thread options offer seamless integration into your BHA. Essential for Well Maintenance: A critical tool for preparing wells for intervention and maximizing operational longevity. The MGN Radial Downhole Magnet by Marlin Oil Tools represents the pinnacle of downhole cleaning technology, providing operators with a robust tool for ensuring well integrity and operational efficiency. Incorporate the MGN Radial Downhole Magnet into your well maintenance toolkit for a cleaner, safer, and more productive well operation.

Houston Digital Instruments (HDI Gauges) is proud to present the HDI 2000B Pressure Gauge System, an intrinsically safe and certified electronic gauge designed to provide accurate and reliable pressure measurements in various industries. With its solid-state platform and field-proven performance, the 2000B system offers exceptional safety, versatility, and low maintenance for users. Let's delve into the features and configurations of this cutting-edge pressure gauge system. Certified Accuracy and Safety: The HDI 2000B Pressure Gauge System is meticulously designed to meet rigorous industry standards. It is certified as intrinsically safe, Class 1, Division 1, Groups A, B, C, and D by CSA. For ATEX/IECEX certification, the gauge system measures pressure ranges up to 20,000 psi, while CSA certification is currently available up to 16,000 psi, with the 20,000 psi option becoming available later in 2023. Regardless of the certification level, all HDI pressure equipment guarantees an accuracy of 0.50% of full scale, ensuring precise measurements in demanding environments. Versatile Applications and Configurations: The HDI 2000B can be combined with a variety of sensor types, making it suitable for pressure, load, force, and torque applications across various industries. Whether you require primary or secondary display capabilities, the 2000B system offers flexible configurations to meet your specific needs. Slave and secondary display options are available, allowing you to extend visibility to multiple locations and optimize data monitoring and control. Reliable and Field Repairable: HDI believes in empowering users to maintain and repair their instruments easily. The 2000B Pressure Gauge System is battery-powered and field repairable, reducing downtime and spare unit inventory costs. Our DIY maintenance options enable you to quickly resolve issues, ensuring uninterrupted operation and minimizing the impact on your productivity. Additionally, the system includes a low battery indicator, providing timely notifications for battery replacement or recharging. Robust Features for Enhanced Performance: The HDI 2000B system is equipped with a range of features designed to enhance performance and usability. It offers pressure measurements from 30 psi up to 20,000 psi, with the option to request kPa or bar units. The system provides a high-resolution display with a 10 psi resolution, ensuring precise readings for critical applications. The solid-state platform eliminates the need for fluids or moving parts, resulting in consistent performance even in high vibration environments. An analog bar graph with a divided scale further enhances the readability of the gauge, enabling quick and accurate data interpretation. Wide Range of Configurations: To accommodate various requirements, the HDI 2000B Pressure Gauge System offers different output options. You can choose between a 4-20mA output (additional barrier required) or a 0-1 volt output, depending on your connectivity needs. The system also supports slave and secondary displays, allowing you to extend visibility and enhance data sharing across your operations. The HDI 2000B Pressure Gauge System stands as a reliable and accurate solution for demanding applications across industries. With its intrinsically safe certification, certified accuracy, and robust design, the 2000B system provides users with a dependable tool for precise pressure measurements. Its versatility, field repairability, and low maintenance requirements contribute to minimized downtime and enhanced operational efficiency. Contact HDI today to discuss your specific application requirements and experience the reliability and performance of the HDI 2000B Pressure Gauge System.

Discover Precision Welding with the TIG AC/DC 301 Pulse! At Canaweld, we take pride in providing welding solutions that are powerful, intelligent, and reliable. The TIG AC/DC 301 Pulse is no exception – a welding machine that exemplifies precision and performance. Designed to meet the diverse needs of professionals in the oil and gas industry, this welding powerhouse offers unparalleled versatility and ease of use. Versatile Welding Capabilities The TIG AC/DC 301 Pulse is a welding marvel, capable of both AC and DC TIG welding, including stainless, mild steel, and aluminum, as well as Stick welding. Whatever the application, our advanced TIG welding parameters enable you to fine-tune the welding process, delivering exceptional results every time. From intricate welding tasks to heavy-duty projects, the AC/DC 301 Pulse rises to the occasion, giving you the flexibility to tackle any welding challenge. Power Meets Intelligence Built with intelligence and efficiency in mind, the AC/DC 301 Pulse features digital control of all welding parameters. This intuitive interface empowers you to tailor the welding settings precisely to your needs, ensuring flawless welds with ease. Additionally, the easy-to-use pulse mode, complete with the "easy-pulse" function, simplifies your welding experience, providing maximum control over your welds. Durable and Portable Design Designed for the rigors of the oil and gas industry, the TIG AC/DC 301 Pulse boasts a compact and innovative design. The shock-proof fiber compound front panel and control panel protection safeguard the machine against accidental impact, ensuring long-lasting performance even in challenging environments. The robust handle integrated into the chassis makes it easy to carry, offering mobility and convenience when moving between welding tasks. Efficient and Reliable Performance With a high duty cycle, the AC/DC 301 Pulse proves to be a workhorse, perfect for production TIG welders who demand the best all day, every day. Its exceptional TIG welding characteristics, paired with automatic compensation for power fluctuations, guarantee consistent and reliable performance in every weld. Unmatched Control and Customization Take control of your welding with the TIG AC/DC 301 Pulse. Special TIG torches enable remote control of welding parameters directly from the torch, giving you the flexibility to fine-tune your welds while working. Furthermore, optional software customization offers added features and tailored settings, enhancing your welding experience even further. Experience the Canaweld Advantage As with all Canaweld products, the TIG AC/DC 301 Pulse is backed by our commitment to quality and customer satisfaction. We stand by the durability and reliability of our welding machines, offering a comprehensive 3-year warranty for your peace of mind. Elevate your welding capabilities with the TIG AC/DC 301 Pulse. Discover precision welding like never before and let Canaweld be your partner in achieving excellence in every weld. Embrace the power of intelligence with the TIG AC/DC 301 Pulse - Welding Perfected!

Revolutionize Your Meetings with ALCiT's Logitech Partnership Online meetings – we've all been there. The constant echo of 'Can you hear me?' and the perpetual mute button fiasco. Say goodbye to these frustrating hurdles, as ALCiT proudly partners with Logitech to bring you seamless Meeting Room Solutions that redefine how you connect, collaborate, and communicate. Experience Meetings Without Hassles At ALCiT, we understand that meetings should be about progress, not problems. That's why our partnership with Logitech is a game-changer. Whether it's a huddle room or a 30-seat conference, our solutions ensure that every meeting is a seamless interaction, allowing you to focus on the agenda, not the technology. Logitech: The Prestigious Tech Pioneer Since its inception in 1981, Logitech has stood as a beacon of innovation and reliability. With products spanning across the globe, Logitech's technology excels at uniting people regardless of distance. Now, ALCiT brings this excellence to your meeting spaces, transforming collaboration dynamics. Unveiling the Magic of Logitech Solutions MeetUp: Compact Brilliance: Small space, big ideas. MeetUp packs impressive features into a compact solution, catering to intimate conferences with crystal-clear audio and sharp video. Rally Camera: Ultra-HD Excellence: Experience brilliance like never before. Rally Camera delivers Ultra-HD imaging, vibrant colors, and optical accuracy that redefine video conferencing quality. Logitech Tap: Touch of Convenience: Empower your workspace with sleek touch control. Tap brings ease to online meetings, with silent operation and an always-ready motion sensor. H820e Headset: Noise-Canceling Revolution: Transform your conference experience with these noise-canceling headsets. With up to 10 hours of talk time and a wide range, your conversations become crystal-clear dialogues. Empower Collaboration, Erase Setup Frustrations ALCiT and Logitech share a common goal – to enhance collaboration and streamline communication. Our Meeting Room Solutions reduce setup complexities and save you precious time. The best part? These solutions seamlessly integrate with your existing services, ensuring a smooth transition. Seamless Meetings: A Click Away ALCiT's partnership with Logitech redefines meetings – from frustrating fumbles to seamless experiences.