2-3/8 inch Halliburton WellStar TR-SCSSSV

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

The Oil Only Absorbent Spill Kit - 41-Gallon contains, The 41-Gallon Oil Only Absorbent Spill Kit is a comprehensive solution for managing medium-sized spills in marine environments, refineries, and loading docks. Designed for versatility and effectiveness, the kit includes, 50 Absorbent Pads (8” x 11.5”) Versatile pads for quick and efficient absorption of oil-based liquids, ideal for various spill scenarios. 4 Sorbent Socks (3” x 4Ft) Specially designed to contain and absorb spills, particularly in confined or challenging areas. 8 Pillows (18” x 18”) Large pillows for absorbing and retaining significant quantities of oil, enhancing spill response efficiency. 1 Pair of Nitrile Gloves Essential personal protective equipment for safe handling during spill cleanup. 5 Disposal Bags Ensures proper containment and disposal of used absorbent materials, contributing to responsible waste management. 1 Gallon Drum (55) A larger containment option for collecting and managing absorbed liquids. Part Number: OH-OOS-41G The kit is specifically tailored for medium spills in marine environments, refineries, and loading docks, offering a comprehensive and efficient response to oil-based spills. Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions.

Dive into the Depths: Poseidon Robotics Introduces Subsea ROV Training Courses At Poseidon Robotics, we believe that the true potential of subsea exploration lies in the hands of skilled professionals. That's why we are excited to announce our comprehensive Subsea ROV Training Courses, designed to equip aspiring ROV operators and seasoned professionals alike with the knowledge and expertise needed to master the art of underwater robotics. Unleash Your Subsea Potential Subsea robotics and Remote Operated Vehicles (ROVs) are revolutionizing the way we explore and interact with the underwater world. Our ROV training courses are crafted to empower individuals with the skills required to navigate ROVs with precision and confidence, ensuring safe and efficient operations beneath the waves. Experience and Expertise At Poseidon Robotics, we take pride in our team of experienced instructors who bring a wealth of knowledge from years of practical ROV operation and subsea exploration. Our instructors have worked on diverse projects worldwide, ranging from offshore oil and gas installations to scientific research and environmental surveys. Comprehensive Curriculum Our Subsea ROV Training Courses cover a wide range of topics, catering to both beginners and advanced learners. From the fundamentals of ROV piloting and navigation to advanced techniques, troubleshooting, and maintenance, our courses leave no stone unturned in providing a well-rounded education in subsea robotics. Hands-On Learning We understand that practical experience is the key to mastering ROV operations. That's why our training courses feature hands-on learning opportunities with our cutting-edge ROV systems. Participants get to operate ROVs in simulated real-world scenarios, honing their skills under the guidance of our seasoned instructors. Tailored to Your Needs Whether you are an individual looking to kickstart your career in subsea robotics or a company seeking to train your ROV operators, our courses can be tailored to meet your specific needs. We offer both individual and group training options, ensuring that you get the most out of your learning experience. A Gateway to New Opportunities Completing our Subsea ROV Training Courses opens the door to exciting career opportunities in the subsea industry. As the demand for skilled ROV operators continues to grow, our certified graduates are well-prepared to embark on rewarding careers in offshore exploration, marine research, salvage operations, and more. Join the Poseidon Robotics Academy Are you ready to dive into the depths of subsea robotics and ROV operations? Join the Poseidon Robotics Academy and unlock the potential of underwater exploration. Our Subsea ROV Training Courses provide the knowledge, skills, and confidence you need to excel in the world of subsea robotics. Invest in Your Future Invest in your future and become a part of the cutting-edge subsea robotics industry. Contact Poseidon Robotics today to learn more about our Subsea ROV Training Courses and take the first step toward a fulfilling and adventurous career beneath the waves. The subsea world awaits your exploration!

Houston Digital Instruments (HDI) is proud to present the 1000P Pressure Gauge System, a versatile and dependable solution designed to meet your pressure measurement needs. Built on our 30-year field-proven platform, this intrinsically safe, solid-state electronic gauge is the go-to choice for applications requiring accurate readings, even in high vibration and rugged environments. Unmatched Readability and Durability: The 1000P Pressure Gauge System is engineered to deliver clear and reliable pressure readings, regardless of lighting conditions. Our innovative design ensures that the gauge remains easily readable, providing crucial information at the point of measurement. Whether you require a primary or secondary readout, the 1000P delivers consistent performance, making it the ideal choice for critical operations. Exceptional Accuracy and Range: At HDI, accuracy is our priority. The 1000P offers pressure ranges up to 20,000 psi, providing the versatility to meet a wide range of application requirements. With an accuracy of 0.50% of full scale, you can trust that your pressure measurements are precise and reliable. Benefit from our extensive experience as the 1000P has been successfully deployed in the field for over 10 years, proving its performance and durability. Designed for Efficiency and Ease of Use: We understand the importance of simplicity and convenience. The 1000P Pressure Gauge System is powered by batteries, eliminating the need for external power sources and ensuring hassle-free operation. The field repairable system minimizes downtime and reduces maintenance costs, allowing you to focus on your operations with confidence. A low battery indicator keeps you informed of the system's power status, ensuring uninterrupted performance when it matters most. Tailored to Your Application: The 1000P can be utilized in various applications with different connection types, providing flexibility and adaptability to meet your specific needs. Choose from 2" 1502, 2" 2002/2202, flanged, or nut connections, ensuring seamless integration with your existing systems. Our team of experts is ready to assist you in selecting the optimal configuration for your application, ensuring the best performance and compatibility. Quality You Can Trust: HDI is synonymous with safety, accuracy, reliability, and low maintenance. The 1000P Pressure Gauge System upholds these qualities, providing you with peace of mind and enabling efficient and effective pressure monitoring. We are committed to delivering products that withstand the test of time and provide consistent performance in demanding environments. Expand Your Measurement Capabilities: Upgrade your pressure measurement capabilities with the 1000P Pressure Gauge System. Benefit from its reliable performance, durability, and ease of use. Whether you require primary or secondary readouts, this gauge system is designed to meet your needs with unmatched accuracy and versatility. Contact Houston Digital Instruments today to discuss your specific application requirements. Our team of experts is ready to assist you in selecting the ideal solution for your pressure measurement needs. Trust HDI for excellence in measurement and monitoring solutions. Together, we'll achieve efficiency, safety, and success.

Enhance Your Vision with the Wisdom Diffuser Lens #1 – Available Now at Provix Provix is excited to introduce the Wisdom Diffuser Lens #1 (model NWI-WLOA-LENS1), a specialized accessory designed to enhance the functionality of your cap light. Ideal for mining, construction, and other industries where clear, wide-range vision is essential, this diffuser lens is a must-have addition to your equipment. Optimized Lighting for Various Environments The Diffuser Lens #1 is expertly designed to fit Cap Light models 2, 3, and 4. It spreads light over a wide area, providing a soft, diffused beam that is perfect for illuminating large spaces without the harshness of direct light. This feature is especially beneficial in environments where clear, broad visibility is crucial for safety and precision. Versatile and Easy to Attach This lens is incredibly easy to attach and use. It seamlessly fits onto your existing Wisdom cap lights, transforming the beam into a more diffused and wide-ranging light. This versatility makes it an excellent tool for various professional and recreational activities, including mining, construction, outdoor adventures, and emergency response. Durable and Reliable Like all Wisdom products, the Diffuser Lens #1 is built to last. Its durable construction ensures it can withstand the rigors of tough working conditions, providing reliable performance time and time again. A Must-Have for Enhanced Visibility Whether you're working underground or in low-light conditions, the Wisdom Diffuser Lens #1 enhances your visibility, making your tasks easier and safer. It's an essential accessory for anyone who relies on cap lights for their work. Get Your Wisdom Diffuser Lens #1 Today Upgrade your cap light with the Wisdom Diffuser Lens #1 from Provix. Visit our website at www.provix.net to discover more about this unique product and explore our wide range of mining equipment designed to enhance your work experience.

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Deploying X-SPAN systems has never been easier! With a range of multi-stage explosive, electric line non-explosive or hydraulic setting tools available, our X-SPAN systems can be deployed quickly and efficiently in any well application. Our explosive setting tools can be initiated electrically, on e-line or slick line using a variety of compatible firing systems. For conventional tubing or coil tubing deployment requirements, several sizes of hydraulically operated setting tools are available to meet your specific needs. Our X-SPAN systems are not only easy to deploy, but they are also easy to remove. Simply mill off the sealing elements and your well is ready for the next application. We take pride in the reliability and quality of our X-SPAN systems, which have been proven many times with over 2900 successful installations completed with a 98% success rate when setting depth has been achieved. At ID OILTOOLS, we are committed to providing our customers with the highest quality and most reliable products on the market. Contact our Tech Services department today to learn more about our X-SPAN systems and how they can benefit your well application.

InWaTec Combined: Enhancing Well Intervention with Precision Dump Bailer Services In the world of well intervention, precision and reliability are paramount. InWaTec Combined is proud to introduce our Dump Bailer services—a cost-effective and efficient solution for transporting fluids to precise points within the wellbore. These services are essential for various applications, ensuring that operations are not only successful but also streamlined for maximum efficiency. Strategic Applications for Optimal Results Our Dump Bailer services are versatile, serving a range of critical applications: Cementing Operations: Deploying cement onto permanent plugs to secure well integrity is executed with precision, ensuring that the cement is placed exactly where it is needed. Acidizing: We specialize in depositing acid precisely at scale restrictions or on flow control items, which may be scaled up to restore functionality and enhance flow. These strategic applications are vital in extending the life of wells and restoring their optimal functionality. Features & Benefits: A Blend of Simplicity and Efficiency InWaTec Combined’s Dump Bailers are designed with the industry's needs in mind, and they come with a host of features and benefits: Standard Slickline Connections: Our dump bailers are equipped with industry-standard connections, ensuring compatibility with a wide range of toolstrings and ease of integration. Simple, Robust Design: Durability and ease of use are at the heart of our design philosophy, providing a tool that withstands the rigors of well operations while being user-friendly. Quick and Easy Field Redress: Time is of the essence in well operations, and our dump bailers are designed for rapid redress in the field, minimizing downtime. Modular Design Flexibility: We understand that well conditions vary, which is why we offer modular designs that allow for field changeable variations in length to suit any well's requirements. Customizable Burst Discs: With the ability to supply various burst discs, we tailor our tools to suit every unique application, ensuring that the operation is conducted with the right specifications for optimal results. Cost-Effectiveness: Our Dump Bailer services provide a cost-effective method for fluid transport within the wellbore, ensuring that budgetary constraints do not compromise well servicing operations. A Partner in Well Intervention At InWaTec Combined, we stand as your partner in well intervention. Our Dump Bailer running services are a testament to our commitment to providing solutions that are not just effective but also enhance the safety and efficacy of your well operations. Conclusion: Precision Fluid Deployment with InWaTec Combined In summary, InWaTec Combined's Dump Bailer services represent an essential component in the well servicing toolkit. With our focus on precision, ease of use, and cost-effectiveness, we ensure that your well intervention operations are performed with the highest standards of accuracy and efficiency. Choose InWaTec Combined for services that deliver where it counts—down the wellbore.

The adjustable pipe, or Stillson, wrench is used to hold or turn pipes or circular bars. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work. When torquing with a pipe wrench remember the tool push phrase - 24 tight and 48 loose!

Empower Your Work with the Wisdom All-in-One Toolkit – A Comprehensive Solution from Provix Provix is proud to present the Wisdom All-in-One Toolkit, a versatile and comprehensive lighting solution tailored for professionals in mining, construction, and other demanding industries. This toolkit is designed to provide everything you need for effective and reliable illumination in various work environments. Complete Set for Varied Lighting Needs The All-in-One Toolkit includes: • A Wisdom 3A or 4A Cap Lamp, offering powerful and adjustable illumination. • A Magnetic USB Wire and Magnetic Connector for easy and secure charging. • Three lenses: Lens #1, Lens #4 (red), and Lens #6, to suit different lighting conditions and preferences. • A Power Supply with a US Plug, ensuring your lamp is always charged and ready to go. • A comfortable Head Strap for hands-free operation. High-Performance Lighting Features With a Panasonic battery of 2*3.5 = 7.0Ah, the cap lamp in this toolkit offers exceptional brightness levels of 1,800 | 12,000 | 25,000 LUX and luminosity of 50 | 265 | 533 LM. It provides long working times of 60 | 13 | 5 hours and impressive lighting ranges of 85 | 219 | 316 meters, ensuring you have the right amount of light for any task. Versatile and User-Friendly Designed for versatility, the All-in-One Toolkit caters to various professional needs, from mining and construction to emergency response and outdoor activities. The different lenses allow for customization of the light beam, enhancing visibility and efficiency in diverse working conditions. Durable and Reliable The toolkit components are built to withstand the rigors of tough working environments. The robust construction of the cap lamp and accessories ensures longevity and reliability, making this toolkit a valuable investment for professionals. Elevate Your Lighting Experience Upgrade your lighting gear with the Wisdom All-in-One Toolkit from Provix. This comprehensive set is your solution for effective, versatile, and dependable lighting in any professional setting. Visit www.provix.net to learn more about this essential toolkit and explore our range of high-quality mining equipment.

ELEKS DevOps as a Service: Unleash Agility and Efficiency In a world where time-to-market, efficiency, and collaboration are paramount, ELEKS emerges as your DevOps partner, driving your IT infrastructure to new heights. With DevOps consulting services tailored to empower your growth, you can elevate your operations, seize opportunities, and embrace a future of innovation. ELEKS DevOps as a Service: Igniting Your Transformation Optimise Business Costs and Performance: Whether your priority is cost optimisation or performance enhancement, our strategic guidance ensures the perfect strategy to achieve your goals. Enable responsive scaling, cost-effective support, and rapid deployment of updates, reducing Time to Value and Total Cost of Ownership (TCO). Optimise Your SDLC with Full-Cycle DevOps Solutions: Our end-to-end custom DevOps solutions transcend software development lifecycles, encompassing infrastructure configuration and support. Efficient resource management, expedited development goals, and reduced costs converge to elevate your time-to-market. Improve Operations and Ensure Scalability: ELEKS adapts DevOps consulting to your project's complexity, catering to startups and enterprises alike. Operational automation, process scaling, and robust disaster recovery strategies reinforce your agility and resilience in a rapidly changing landscape. Safeguard Your Data Security: Our DevOps consulting fortifies your infrastructure with centralised monitoring, logging, and proactive alerts. Industry-leading cybersecurity and data strategy services layer expertise, ensuring the security and stability of your IT ecosystem. Enable Agility and Faster Time-to-Market: Elevate your internal resources while harnessing the cloud's benefits with DevOps as a Service (DaaS). Automation streamlines deployment cycles for seamless collaboration, continuous improvement, agile delivery, simplified data flow, efficient documentation, and quality control. Enhance Your Service: ELEKS DevOps ensures uninterrupted high-quality customer service by automating critical processes and tasks. Our robust infrastructure maintenance keeps your services running without interruptions. ELEKS DevOps as a Service: Charting Your Course Continuous Integration (CI) / Continuous Delivery (CD): Fuel your digital transformation with automated delivery processes. By automating software versioning and service deployment, CI/CD slashes time-to-market, fostering operational agility. Infrastructure as a Code (IaC): IaC empowers early-stage testing in a production-like environment, preventing deployment issues. Applications are delivered faster, at scale, and with heightened quality, transforming your software development cycle. Continuous Monitoring: Real-time insights into your software's health, security, and transparency shape ELEKS' DevOps services. Proactively monitor, detect, and resolve performance and security issues, ensuring uninterrupted production. Containerisation/K8s: Embrace containerisation for agility and scalability. Swift software updates, resource efficiency, and superior stability converge to optimise costs while ensuring data security. Cloud Management: Seamless IT infrastructure integration with the cloud ensures performance, flexibility, security, and predictable spending. DevOps specialists free your in-house resources for critical processes and tasks. DevOps Automation: Automate testing, delivery, and deployment with DevOps automation, reducing human assistance and dramatically cutting time-to-value. Deploy updates faster, aligning with your business objectives. Expert Support and Training: Decades of software development expertise empower ELEKS' DevOps specialists. We instill industry best practices, foster knowledge and skills, and proactively resolve issues. ELEKS DevOps Consulting Process: Your Guiding Stars 1. Planning and Strategy Development: Define objectives, assess ROI, estimate timelines, and identify potential roadblocks. 2. Environment Set-up and Implementation: Create an environment for code versioning, automate processes, and establish project infrastructure. 3. Infrastructure Testing and Release Set-up: Verify product quality, ensure performance, and set up continuous testing for seamless operations. 4. Maintenance and Support: Implement updates, maintain application productivity, evaluate UX, gather feedback, and generate best practices. ELEKS DevOps as a Service: Empowering Possibilities Cloud Service Models We Work With: Our Technology-as-a-Service model accommodates diverse enterprise infrastructure needs. We specialize in IaaS, PaaS, SaaS, and DaaS, leveraging leading technologies like Amazon EC2, Google Compute Engine, Amazon Elastic Beanstalk, Google AppEngine, and more. ELEKS DevOps as a Service: Your Path to Transformation With ELEKS as your DevOps partner, you're primed to navigate the ever-changing IT landscape with unmatched agility, efficiency, and resilience. Unleash your potential and seize tomorrow with ELEKS DevOps as a Service.

Seamless Zone Isolation: InWaTec Combined’s E-line Bridge Plug Setting Services In the complex operations of oil and gas extraction, the ability to isolate zones within the wellbore is critical for effective production management and intervention. InWaTec Combined offers specialized E-line Bridge Plug Setting Services, utilizing state-of-the-art tools to achieve precise zonal isolation with both permanent and retrievable bridge plug options. Bridge plugs are essential elements in completion hardware, designed to provide robust seals both above and below the production tubing within the casing, liner, or wellbore wall. Their primary function is to isolate certain sections of the well, which is especially beneficial in wells with multiple producing zones or when specific zones need to be temporarily sealed off during interventions. Permanent Bridge Plugs: These are typically favored for their cost-effectiveness and superior sealing and gripping capabilities. Once set, they provide a dependable barrier, with metal slips or "slips" that anchor into the casing's inner diameter using sharpened, carburized teeth. The seal is completed with large cylindrical rubber elements, and in high-pressure environments, metal rings enhance the seal by preventing rubber extrusion. Retrievable Bridge Plugs: These plugs are the go-to solution when flexibility is required, such as during secondary recovery operations, well re-completions, or when there's a need to change out production tubing. Though they may have lower sealing and gripping capabilities compared to permanent options, their design allows for removal and reuse, providing significant operational versatility. Our E-line Bridge Plug Setting Services deploy these tools with precision. The plug is conveyed into the well via wireline—a method that provides real-time depth control and selectivity. Once at the target depth, an axial load is applied to the bridge plug to initiate the expansion of the slips and rubber elements, creating a secure seal against the casing. The setting mechanism can be activated hydraulically, mechanically, or with a controlled chemical charge, depending on the well conditions and client requirements. InWaTec Combined’s expertise ensures that the most appropriate setting method is chosen for each operation, considering the well's pressure environment, the desired duration of the plug setting, and the future plans for the well. By opting for InWaTec Combined’s E-line Bridge Plug Setting Services, operators benefit from a service that combines reliability with adaptability. Our commitment to leveraging advanced technologies with expert execution means that your well operations can proceed with confidence, knowing that each zone is isolated with the utmost precision. InWaTec Combined is dedicated to providing solutions that enhance operational efficiency and well integrity. Whether you require a permanent solution for long-term isolation or the flexibility of a retrievable plug for short-term interventions, our E-line Bridge Plug Setting Services are designed to meet your needs with precision, reliability, and cost-effectiveness.

Custom Designed Gas Solutions: Your Partner in Customized Excellence with Lovat Gas Solutions At Lovat Gas Solutions, our approach is simple yet effective: we develop custom gas solutions that are specifically designed to meet the unique requirements of your application. As a service-oriented company, we are dedicated to delivering solutions that work seamlessly for your business. It is this commitment to excellence that sets us apart and earns us the loyalty of our valued customers. Why choose Lovat Gas Solutions for your custom gas needs? 1. Tailor-Made Solutions: We understand that your business has distinct requirements and challenges. That's why we take a personalized approach to develop solutions that are specifically tailored to your application. Whether you need a gas supply solution, operational support, or a comprehensive project plan, we design and deliver the solution that perfectly fits your needs. 2. Customer-Centric Focus: Your satisfaction is our top priority. We value your partnership and strive to build long-lasting relationships based on trust and exceptional service. Our team of experts takes the time to listen to your needs, understand your goals, and work collaboratively to deliver the optimal solution for your business. 3. Service-Oriented Approach: Lovat Gas Solutions is committed to providing the highest level of service to our customers. From the initial consultation to ongoing support, we prioritize responsiveness, reliability, and open communication. Our dedicated team is always ready to address your questions, concerns, and evolving needs. 4. Proven Track Record: Our customers love working with us because we consistently deliver results. With a wealth of industry experience, our team has a proven track record of success in developing and implementing effective gas solutions across various sectors. We are confident that we can exceed your expectations and provide you with a solution that works seamlessly for your application. Choose Lovat Gas Solutions as your partner for custom gas solutions. Experience the difference of working with a company that is dedicated to developing tailored solutions that deliver optimal results for your business. Contact us today to discuss your specific needs, and let our experienced team design a custom gas solution that works for you. Together, we will achieve excellence and drive your success with Lovat Gas Solutions.

Achieving Uninterrupted Connectivity in the Oil and Gas Industry with Nulux Wireless Access Points Connectivity within the sprawling expanse of the oil and gas industry is pivotal to ensuring seamless operations, meticulous project planning, and scrupulous quality assurance. Recognizing the industry's intricate need for steadfast communication, Nulux Network Solutions proudly presents its expertise in Wireless Access Points (WiFi), a service meticulously sculpted to facilitate unbroken connections even in the most challenging terrains and bustling work environments. Unlocking New Operational Efficiencies with WiFi Solutions Incorporating wireless connections into your operational fabric isn't merely about ensuring communication; it's about unlocking new echelons of operational efficiencies, enabling rapid documentation review, streamlining QA-QC processes, and enhancing project planning through unbroken connectivity. Nulux, with its robust wireless networks, assures that every corner of your business, whether it be the office, the warehouse, or the facility floor, stays interconnected, propelling your business towards enhanced time and cost efficiency. Advantages of Opting for Nulux Wireless Access Points Reliability: In environments where every second count, our WiFi solutions ensure that your data transmission remains steadfast, unbroken, and secure. Customization: Understanding that every facility has unique challenges, our team designs WiFi networks that are meticulously tailored to your operation, ensuring optimal coverage and performance. Scalability: As your operations evolve, our wireless networks can be effortlessly expanded to cater to growing data and connectivity needs. Security: Ensuring that your data traverses through a secure network, we implement cutting-edge security protocols, safeguarding your critical operational data from potential cyber threats. Nulux – Your Ally in Enhanced Connectivity Our proficiency isn’t merely limited to providing robust WiFi solutions. Navigating through the complexities of wireless communication, we’ve developed expertise in designing and implementing various wireless infrastructures like Point-to-Point (P2P) and Point-to-Multipoint Radio Networks, and Mesh Networks, ensuring that you always find a solution that aligns with your specific needs. While P2P networks facilitate streamlined communication links between two fixed points, ensuring enhanced security and cost-effectiveness, Point-to-Multipoint networks facilitate connectivity between more than two points through a single shared line, ensuring that data can be sent and received in a many-to-many configuration. Deploying Expertise Where It Matters Being at the industry forefront in wireless technology, Nulux is committed to ensuring that as the tech evolves, your operations evolve with it. Our experienced team, having substantial experience in the nuanced domains of wireless system and infrastructure design and implementation, is dedicated to propelling your operations into a future where connectivity isn’t just ensured; it's effortlessly seamless. Elevating Operations with Nulux In an era where connectivity translates to operational proficiency, Nulux emerges as your partner, ensuring that every node of your operation stays interlinked through robust, secure, and reliable wireless networks. Explore the future of unhindered connectivity in the oil and gas sector with Nulux Network Solutions – where technology and expertise converge to elevate your operations. Join hands with Nulux, and let’s weave a network of unbroken connectivity, propelling your operations into a future where every data point, every communication, and every connection is seamless, secure, and reliable.

Navigating Through the Intricacies of DCS Networks: Nulux's Unparalleled Expertise in Design, Planning, and Installation In the digitally dominated era where distributed control system (DCS) networks stand at the helm of operational efficiency and control, especially in the critical terrain of the oil and gas industry, Nulux Network Solutions etches its prowess in delivering bespoke, resilient, and high-performance network solutions. Your Strategic Partner in DCS Network Management With over two decades deep-diving into telecommunications and networking, Nulux has not just witnessed but actively shaped the evolution of industrial networks, especially when it comes to complex and crucial DCS network upgrades across the expanse of North America. Our hands-on experience spans from installing, maintaining, to strategic troubleshooting and upgrading multifaceted copper cabling systems, a testimony to our comprehensive mastery over the domain. At the heart of our operations reside resolute perfectionism and an unyielding commitment to optimal workmanship, which not only fills a significant industry void but also redefines the benchmark for telecom cabling providers. Your DCS Network, Crafted with Precision by Nulux Designing and Planning: Our seasoned team navigates through the complexity of your operational requirements, ensuring the DCS network is meticulously designed and planned, guaranteeing an unbroken chain of communication and control across your operational modules. Installation with Excellence: Employing our profound understanding of copper network potentials, our installation services assure you enjoy the robustness, reliability, and performance copper networks inherently bring – high-bandwidth transmission, easy termination, and dependable long-term functionality. An Expanse of Comprehensive Solutions: Nulux’s proficiency isn’t siloed into merely design and installation. Our offerings span from providing effective solutions for voice, data, video services, to crafting custom solutions that mirror your specific operational requisites. Moreover, we stand by you throughout your project’s lifecycle with unwavering technical support. Why Navigate the DCS Network Terrain with Nulux 1. Unwavering Quality: Nulux is synonymous with quality, backed by robust and high-performance networks that effortlessly manage operational data loads while ensuring cost-effectiveness and a remarkable degree of reliability and durability. 2. Tailored Solutions: Your operational needs are unique, and we honor that uniqueness by delivering customized DCS network solutions, ensuring that the system isn’t just installed but is an actual asset enhancing your operational efficiency and control. 3. A Partner, Not Just a Provider: Our understanding of networks transcends technical know-how, delving into recognizing what truly propels businesses towards competitiveness and operational excellence. 4. A Testament of Experience: Our past endeavors echo our expertise and commitment, having successfully executed numerous industrial projects, ensuring our clients' DCS networks are not mere communication channels but strategic assets propelling operational success. In the rugged and challenging operational landscapes of the oil and gas industry, let Nulux Network Solutions be your beacon, ensuring your DCS networks are not just infrastructural installations but strategic conduits amplifying your control, communication, and operational efficiency. Embark on a journey where your DCS networks become pivotal assets driving operational success and efficiency. Connect with Nulux Network Solutions today for an initial consultation and step into a future where your operations are seamlessly integrated, controlled, and perpetually propelled towards excellence.

The Lufkin Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit in the Lufkin line. These units are simple to operate and require minimum maintenance. Unit Size* C-1824D-305-240 A 120.00 B 228.00 C 340.00 E 263.50 F 396.50 H 545.00 I 25.50 J 110.00 L 64.00 M 80.25 N - N1 24.50 R 161.00 T 58.88 U 92.38 V 52.00 W 50.00 X 112.50 AA 51.69 AB 90.88 UU 24.13 VV 57.00 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, Lufkin Oilfield Services refurbishes and sells used pumping units and provides installation, field service, machine shop repair and new OEM parts for its’ customers. All brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. Additionally, Lufkin Automation is the industry leader in oil production automation and well optimization products and services (pump-off controllers, dynamometers, fluid level equipment, well analysis, design/analysis software, well design consulting and training). With the acquisition of Delta-X and Nabla and with thousands of controllers in service, Lufkin Automation continues the Lufkin tradition of helping producers lower their production costs and optimize well efficiency.

Unlock Efficiency in Oilfield Operations with HOCA Oil Tools’ Tubing Swages In the dynamic world of oilfield services, precision and reliability are non-negotiable. At HOCA Oil Tools, we understand the critical nature of downhole operations. That’s why we're proud to present our premium Tubing Swages – Type A and Type C – designed to meet and exceed the challenging demands of downhole slick line tools applications. Revolutionize Downhole Challenges with Tubing Swages Our Tubing Swages are engineered for excellence, ensuring your downhole operations are seamless and efficient. The Type A and Type C Tubing Swages are crafted with the highest quality materials, ensuring durability and long-lasting performance in the harshest environments. Type A Tubing Swage: This variant is meticulously designed to re-expand constricted tubing, ensuring a free passage for wireline tools and sub-surface controls. Its tapered ends facilitate easy navigation through tubing, while the central hole and lateral ports allow fluid bypass, optimizing performance. Type C Tubing Swage: Building on the features of Type A, the Type C Tubing Swage includes an additional box connection at the bottom, enhancing its functionality and application range. This feature ensures greater versatility, meeting diverse operational needs with ease. Six Benefits of Using HOCA’s Tubing Swages: Enhanced Productivity: By rectifying constrictions in the tubing, our swages ensure smooth operations, significantly reducing downtime and boosting productivity. Versatility: Available in various sizes, the Tubing Swages cater to a wide range of tubing diameters, ensuring the right fit for your specific operational needs. Durability: Crafted with high-quality materials, our swages withstand the challenging downhole environment, offering long-term reliability and reducing the need for frequent replacements. Efficient Design: The tapered design and fluid bypass capability ensure minimal resistance during operations, enhancing efficiency and effectiveness. Cost-Effective: By maintaining the integrity of your downhole tools and minimizing operational delays, our Tubing Swages prove to be a cost-effective solution in the long run. Safety: Designed with safety in mind, our swages help prevent accidents and equipment damage, ensuring a safer working environment. Transform Your Operations with HOCA Oil Tools At HOCA Oil Tools, we're committed to providing solutions that drive success. Our Tubing Swages are a testament to our commitment to quality, efficiency, and safety. Embrace the change with HOCA’s Tubing Swages and experience unparalleled downhole operational excellence.

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue

Accelerate Your Fabrication Success with Welder Leasing from CWB National Leasing Empowering Your Business with State-of-the-Art Welding Solutions In industries such as manufacturing, construction, automotive repair, and metalworking, high-quality welders are essential for efficient, precise, and reliable fabrication work. Leasing welders through Canadian Western Bank (CWB) National Leasing presents a flexible, cost-effective, and intelligent solution for businesses seeking to enhance their welding capabilities. Here’s how leasing welders can boost your business operations: 1. Fast Access to Advanced Welding Equipment CWB National Leasing understands the critical role of welding equipment in your operations. They offer a swift leasing process, typically notifying your equipment dealer about payment within 48 hours of approval. This rapid service means your welders can be delivered and operational quickly, enhancing your fabrication efficiency and reducing project turnaround times. 2. Enhanced Financial Flexibility Leasing welders with CWB National Leasing enhances your buying power. It allows you to allocate resources efficiently by opting for periodic payments over a significant upfront purchase. The flexibility to add extra features or accessories to your welders for a small payment increase enables customization to meet specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your welders start contributing to your business’s revenue while they're still being paid off. This strategy helps maintain a healthy balance between expenses and income, crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing welders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease welders through CWB National Leasing is a strategic decision that equips your business with essential welding tools while maintaining financial agility. It ensures access to the latest welding technology, vital for high-quality fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business excel in the competitive fabrication and manufacturing industries.

Introducing the MIG/STICK 202: Your Versatile Welding Companion for Oil and Gas Industry When it comes to MIG welding machines that deliver unmatched performance and precision, Canaweld is the name you can trust. Our high-performance MIG welders are designed to tackle the toughest welding jobs in the oil and gas industry, offering a wide range of durable MIG welders, industrial heavy-duty MIG welders, high-tech MIG pulse welders, and portable MIG welders to suit your needs. The Ultimate Welding Solution Canaweld MIG welding machines are not just powerful; they are versatile too. Whether you need to perform Flux-cored or Flux-cored gasless welding or MIG Brazing, our machines have got you covered. Designed for speed, ease of use, and cost savings, our MIG welders are engineered to handle various materials, including mild steel, stainless steel, aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys. Precision and Durability in Every Weld The MIG/STICK 202 is the epitome of portability, power, and versatility in welding. This unit is capable of welding up to 3/8-inch steel in either MIG mode or SMAW setting, providing you with the flexibility to tackle light to medium-duty welding jobs effortlessly. With the ability to run 0.023–0.045-inch MIG wire or up to 3/16-inch SMAW rods with a stable arc, this welding machine delivers exceptional results with every weld. Outstanding Features to Boost Your Productivity At Canaweld, we prioritize your welding experience. That's why the MIG/STICK 202 is equipped with an array of features that set it apart from the rest: • High power output: Enjoy 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, giving you the power you need for demanding welding tasks. • Tested for the toughest conditions: The machine has been rigorously tested in extreme temperatures of 104°F /40°C to ensure optimal performance in any environment. • Inverter power source: The MIG/STICK 202 boasts an inverter power source with optimal welding characteristics in both MIG and Stick modes. • Power fluctuations compensation: The automatic compensation for main power fluctuations within ± 20% ensures a stable and consistent welding process. • Long-distance welding capability: With the ability to use up to 165 feet (50 meters) leads without any power loss at the weld, you can tackle distant welding projects effortlessly. • Precise wire feed: The high-grade metal dual drive roll system ensures precise and constant wire feed, preventing bird nesting and improving efficiency. • Wide welding range: Weld up to 3/8” steel and aluminum with ease, making it suitable for a wide range of applications. • Graduated knob for accuracy: Achieve the most accurate settings with the graduated knob, giving you full control over your welding process. • Stable arc with minimal spatter: The MIG/STICK 202 automatically controls wire speed by voltage feedback, resulting in an extremely stable arc with minimal spatter. • Reliable cooling and protection: Fan-cooled and thermally protected against overheating, this welding machine ensures longevity and durability. • Built-in polarity changeover: Easily switch between common gas and gasless wires with the built-in polarity changeover feature. • User-friendly design: The metal face panel adds durability, while the spool gun compatibility and support for both 8 and 12-inch wire spool sizes enhance convenience. • Comprehensive warranty: Enjoy peace of mind with our comprehensive 3-year warranty, knowing that your investment is protected. Experience Welding Excellence with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld delivers superior performance, precision, and durability. Invest in the MIG/STICK 202 and take your welding capabilities to new heights. With Canaweld's commitment to quality and customer satisfaction, you're choosing a welding companion that will exceed your expectations. Unlock your welding potential with Canaweld. Experience the future of welding technology and achieve exceptional results with the MIG/STICK 202.