¿No tienes una cuenta? Únete gratis
Para publicidad en
¿Interés en convertirse en vendedor? Obtener información
¿No tienes una cuenta? Únete gratis
Para publicidad en
¿Interés en convertirse en vendedor? Obtener información
¿Nuevo aquí? Regístrate
¿No tienes una cuenta? Únete gratis
Para publicidad en
¿Interés en convertirse en vendedor? Obtener información
¿Nuevo aquí? Regístrate
Water Injection Valve
También conocido como:
SSSV, water injection valve, WI valveBuy
Made to Order
Product
New
API
Air Freight
Título:
Storm Choke WI Valve 3.97 inchNúmero de modelo:
wiDisponibilidad:
Made to OrderTiempo de entrega (semanas):
3 weeksChoose
Midastream Supply Company en Airdrie
Para información sobre productos o servicios, personalización u otras preguntas
Tipo de transacción
BuyCondición
NewPeso
less than 100 kgUbicación
CanadaTipo de compañía
Product ProviderGarantía de calidad
APIPrecio
Request for Quote Based on specificationsMaterial
SteelNombre de la marca
HalliburtonEnvío
Air FreightNotas
The WI injection valve is a standalone device.2 3/8" L80 Yellowband Tubing Hydril 533
2 3/8 L80 TubingMidastream Supply Company en Airdrie
This connection is fully interchangeable with: Wedge 503® - 2.375 in. - 0.19 (4.70) in. (lb/ft) Wedge 533® - 2.375 in. - 0.218 (5.30) / 0.254 (5.95) / 0.295 (6.60) / 0.336 (7.45) in. (lb/ft) Wedge 563® - 2.375 in. - 0.19 (4.60) / 0.218 (5.10) / 0.254 (5.80) / 0.295 (6.60) / 0.336 (7.35) in. (lb/ft)
Buy
In Stock
Product
Used
API
Sea Freight
Midastream Supply Company en Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company en Airdrie
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
WellStar Tubing Retrievable Surface Controlled Subsurface Safety Valve 2-7/8 inch Halliburton
SCSSSV WellStarMidastream Supply Company en Airdrie
The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
SP TR Surface Controlled Subsurface Safety Valve 6-5/8 inch
SCSSSV SPMidastream Supply Company en Airdrie
The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
MC Injection Safety Valve 3-1/2 inch
MC Injection Valve 3-1/2 inchMidastream Supply Company en Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
In Stock
Product
New
API
Sea Freight
5.5 inch Depthstar Surface Controlled Subsurface Safety Valve
Depthstar 5.5Midastream Supply Company en Airdrie
Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Land Freight
FRN 3-1/2 inch Subsurface Safety Valve WR
WR-SCSSSV FRNMidastream Supply Company en Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
O-rings and Gaskets for various applications including re-dress of downhole equipment
O-ringsMidastream Supply Company en Airdrie
An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface.
Buy
In Stock
Product
New
API
Sea Freight
Midastream Supply Company en Airdrie
The A-3™ LOK-SET™ packer combines advantages of a retrievable packer with the features of a permanent packer. An ability to lock down tubing forces makes the A-3 suitable for a broad range of applications, including production, injection, zone isolation, and remedial operations. The AL-2™ LOK-SET packer is similar to the A-3, and has a larger bore. To provide a simple and reliable injection system for retrieving an injection string without having to unseat the packer: L-10 or L-316 on-off sealing connectors, Product Family Nos. H68420 andH68422. Baker Hughes blanking plug can be used in the seating nipple proile ofthe on-off sealing connector to provide a means of plugging the lower zone whilethe tubing is being pulled. We can source from current stock or direct from the manufacturer.
Buy
In Stock
Product
New
API
Sea Freight
Surface Controlled Subsurface Safety Valve FRN 6-5/8 inch
WR-SCSSSV FRNMidastream Supply Company en Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
NE Safety Valve, Surface Controlled 4-1/2 inch
SCSSSVMidastream Supply Company en Airdrie
The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
OCTG Tubing from 2 3/8 inch to 7 inch for oil and gas well completions
OCTG TubingMidastream Supply Company en Airdrie
OCTG (Oil Country Tubular Goods) refers to the piping products that are used in oil and gas production and drilling activities. OCTG pipe normally is manufactured based on API specifications. Oil country tubular goods (OCTG) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading conditions according to their specific application. Tubing is the pipe placed in the well that is exposed to flowing fluids from the reservoir to surface. It is uncemented and able to pulled and replaced in the event the pipe erodes or corrodes. Our international network of manufacturers and warehouses have almost all weights and grades in stock.
Buy
In Stock
Product
New
API
Sea Freight
Midastream Supply Company en Airdrie
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company en Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Air Freight
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Envío:
Sea freight - Land freight | International shipment of items may be subject to customs processing and additional charges.
Situado en:
Canada
Welding Cable Double Insulated AWG 4
Welding CableCanaweld Inc. en Vaughan
Introducing Canaweld's Double Insulated Welding Cable - The Ultimate Powerhouse for Your Welding Needs! When it comes to welding, having the right equipment is crucial for achieving superior results and ensuring safety. At Canaweld, we take pride in crafting high-quality welding accessories designed to meet the rigorous demands of the oil and gas industry. Our Welding Cable Double Insulated AWG 4 (21.2 mm2) is a game-changer that will elevate your welding experience to new heights. Uncompromising Quality: Our welding cables are meticulously engineered to deliver unmatched performance and reliability. Crafted from 100% pure copper, these premium welding cables boast a Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172. This construction ensures optimal conductivity, allowing for seamless power transfer during your welding operations. Safety First: At Canaweld, we prioritize safety above all else. That's why our welding cables are double insulated, offering enhanced protection and peace of mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, you can trust our cables to handle the toughest welding tasks with ease. Built to Withstand the Toughest Conditions: We understand that welding environments can be harsh and demanding. That's why our welding cables are engineered to be highly resistant to cuts, tears, and abrasions. They are designed to withstand exposure to oil, solvents, and chemicals, ensuring their durability and longevity even in the most challenging workspaces. Unmatched Flexibility: Work with ease and efficiency using our flexible welding cables. With a minimum bending radius of 4 times the cable diameter, our cables offer excellent maneuverability, allowing you to navigate through tight spaces and challenging welding positions effortlessly. Compliant with Environmental Standards: At Canaweld, we are committed to environmental responsibility. Our welding cables are RoHS compliant, ensuring they adhere to strict environmental standards and are free from harmful substances. Elevate Your Welding Performance: Upgrade your welding setup with Canaweld's Double Insulated Welding Cable AWG 4 (21.2 mm2) and experience the pinnacle of welding excellence. Trust in Canaweld's expertise to deliver top-of-the-line welding accessories that enhance safety, productivity, and performance. With Canaweld by your side, you can confidently take on any welding project in the oil and gas industry. Invest in the best for your welding endeavors - choose Canaweld.
Buy
In Stock
Manufacturer
New
ASTM
Land Freight
Water Injection Safety Valve 4.25 inch
WI ValveMidastream Supply Company en Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
MS-52 Multistage Steam Turbine
Back Pressure TurbineKessels Engineering Works Pvt. Ltd. en New Delhi
Elevate Your Energy Solutions with the Kessels MS-52 Multistage Steam Turbine: Unleash Power, Precision, and Performance In the ever-evolving realm of steam turbine technology, Kessels Steam Turbines stands as a beacon of innovation and excellence. For the oil and gas industry, where power and precision are paramount, our MS-52 Multistage Steam Turbine is the ultimate solution – engineered to surpass expectations and redefine industry standards. Dominating Back Pressure Turbines Back pressure turbines, available in both single-stage and multi-stage configurations, serve as the vital link between boiler units and process steam headers. These turbines are the backbone of industries that demand a copious amount of steam, revolutionizing the utilization of steam and electricity generation. The Art of Efficiency At the heart of the MS-52 Multistage Steam Turbine is the hallmark of back pressure turbines: the straight-back pressure design. This engineering marvel ensures the seamless harnessing of exhaust steam, matching process demands with unparalleled precision. Every unit of electrical power generated is consumed as per the process steam demand, making it a pinnacle of efficiency. Applications Without Limits Our MS-52 turbine is not just a machine; it's a versatile workhorse ready to excel in various applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Take a giant leap towards sustainability by utilizing our turbine to generate electricity. It powers generators with clean and efficient steam energy, reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-52 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are the order of the day. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a steady and reliable steam supply that your operations can depend on. The Kessels Advantage Choosing Kessels Steam Turbines is more than a business decision; it's a choice of a partner committed to your success. Our MS-52 Multistage Steam Turbine embodies our unwavering dedication to innovation, performance, and customer satisfaction. Key Benefits of the MS-52 Multistage Steam Turbine: Unparalleled Efficiency: Maximize steam utilization while minimizing waste. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations. Unmatched Versatility: Adapt effortlessly to changing needs, be it for drive applications or sustainable power generation. A Greener Future: Harness steam power for electricity generation, reducing your environmental impact. Dedicated Support: Our team of experts is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Pumpjack C-320D-256-144 for application in the majority of oil wells
Conventional PumpjackMidastream Supply Company en Airdrie
The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported.
Buy
Currently in Use
Product
Used
API
Land Freight
Receive Foreign Payments with Ease
Business Foreign Exchange ServicesDunbridge Financial en Oakville
Unlock Faster Payment Solutions with Dunbridge Financial: Receive Foreign Payments with Ease Are you tired of waiting for foreign payments to arrive and tired of dealing with complex international transactions? At Dunbridge Financial, we understand the frustration that comes with delayed payments from foreign companies. Our financial service is here to revolutionize the way you receive foreign payments, ensuring you get paid faster and without the hassle. Receive Foreign Payments with Ease With Dunbridge Financial, you can now say goodbye to lengthy delays and welcome faster payment solutions. We have designed our platform to make receiving foreign payments a breeze, so you can focus on growing your business without worrying about late payments. Why Choose Dunbridge Financial? 1. Streamlined Payment Processes Our platform streamlines the entire payment process, making it quick and efficient. No more dealing with complicated paperwork or slow banking systems. With Dunbridge Financial, you'll experience a seamless and hassle-free way to receive foreign payments. 2. Speed Up Your Cash Flow Getting paid faster means improving your cash flow and having more flexibility in managing your business finances. With Dunbridge Financial's fast payment solutions, you can put your money to work sooner, helping your business thrive. 3. Secure and Reliable Your financial security is our top priority. We partner with trusted payment service providers who adhere to strict security standards, ensuring that your funds and data are safe and protected at all times. 4. Expert Customer Support We are more than just a financial service provider; we are your dedicated partner in your financial journey. Our experienced team of customer support professionals is here to assist you every step of the way, providing expert guidance and personalized solutions. Join Us Today and Unlock Faster Payment Solutions Don't let delayed foreign payments hold you back. Join Dunbridge Financial today and experience a world of faster payment solutions and enhanced financial control. With our streamlined processes, secure platform, and dedicated customer support, you'll never have to worry about slow payments again. Empower your business with Dunbridge Financial. Sign up now and embrace a new era of financial efficiency and success. Receive foreign payments with ease and enjoy the benefits of faster cash flow, giving your business the edge it deserves.
Service
Made to Order
Service
New
ISO
Air Freight
CWB National Leasing en Winnipeg
Revolutionize Your Manufacturing with CNC Machine Leasing from CWB National Leasing Enhancing Precision and Productivity in Your Operations with Advanced Equipment Solutions For businesses in manufacturing, engineering, or fabrication, CNC (Computer Numerical Control) machines are pivotal for enhancing precision, efficiency, and versatility in production. Leasing CNC machines through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially astute solution for businesses seeking to upgrade their manufacturing capabilities. Here’s how leasing CNC machines can benefit your business: 1. Quick Access to State-of-the-Art Equipment CWB National Leasing values the pace of your business operations and offers a rapid leasing process. Decisions are typically made within 48 hours of your application, ensuring that your CNC machines can be delivered and operational quickly. This efficiency minimizes downtime and enhances your production capacity, allowing you to meet customer demands more effectively. 2. Increased Financial Flexibility Leasing CNC machines with CWB National Leasing boosts your financial power. It allows you to spread costs over periodic payments rather than making a significant upfront investment, freeing up capital for other vital business needs. The option to add extra features or accessories to your CNC machines for a small payment increase enables customization to meet specific production requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your CNC machines start contributing to your business’s revenue while still being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is key for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing CNC machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can impact your taxes.
Service
In Stock
Service
New
ISO
Tubing Retrievable Surface Controlled Subsurface Safety Valve 2-7/8 inch SP
SCSSSV - SPMidastream Supply Company en Airdrie
The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
EnviroBlu 1 Litre Equipment Cleaner
EnviroBlu Cleaner and DegreaserMekapisk EnviroBlu Solutions Inc. en St. John’s
Discover the Power of EnviroBlu: Revolutionizing Hand Tool and Small Equipment Cleaning In the relentless environments of the oil and gas industry, the need for efficient and effective cleaning solutions is paramount. We at Mekapisk EnviroBlu Solutions Inc. are proud to introduce the 1-litre EnviroBlu cleaner—a game-changer for maintaining hand tools and small equipment parts. This isn't just a cleaner; it's a revolution in industrial maintenance, combining powerful results with a commitment to sustainability. The EnviroBlu Vision At EnviroBlu, we are driven by a singular vision: to create a cleaner and safer world for everyone. Founded on the indigenous values of respecting and protecting our lands and waters, Mekapisk EnviroBlu Inc. and the EnviroBlu brand are dedicated to transforming industries through sustainable practices. Why Choose EnviroBlu? EnviroBlu: The Eco-Friendly Choice EnviroBlu is committed to providing the best environmentally safe cleaning and degreasing products available in the market today. Our water-based, non-toxic, phosphate-free formula ensures fast and reliable cleaning results without harming the environment. With EnviroBlu, you achieve industrial-strength cleanliness while upholding your commitment to sustainability. 1. Environmentally Safe EnviroBlu’s water-based, non-toxic, and phosphate-free formula makes it safe for both people and the environment. Certified food safe by the Canada Food Inspection Agency (CFIA) and recognized as a Green Marine Partner, EnviroBlu is tough enough to clean oil rigs but safe enough for your kitchen. 2. Cost-Effective EnviroBlu products are designed to save you money. By cutting down cleaning time and reducing the need for multiple products, EnviroBlu helps you streamline your maintenance processes. This means fewer purchases, lower overheads, and significant cost savings—all while ensuring a safe and clean environment for your employees and customers. 3. Fast & Efficient EnviroBlu’s advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring quick and thorough cleaning. Our formula performs as well or better than our competitors while exceeding environmental standards, making your cleaning tasks faster and more efficient. 4. Versatility Across Industries Whether it's in industrial, commercial, or residential settings, EnviroBlu delivers consistent and reliable performance. It’s the go-to solution for cleaning hand tools, small equipment parts, and more. Industrial: EnviroBlu helps reduce environmental contaminants across various industries, including offshore, transportation, aerospace, manufacturing, and more. Commercial: EnviroBlu is an eco-friendly solution for commercial cleaners and large retail environments such as supermarkets and big-box stores. It’s safe for use around food and rated as environmentally friendly. Residential: Strong enough to clean an offshore oil rig but safe enough to clean your dishwasher, EnviroBlu is perfect for all home cleaning tasks, including around the garage and garden. Green Marine Partner: Advancing Environmental Excellence EnviroBlu is a Green Marine Partner, participating in North America's leading environmental certification program for maritime industries. This voluntary initiative helps participants improve their environmental performance beyond regulations, targeting key issues related to air, water, and soil quality. Stay Green, Go Blu! Choose EnviroBlu for your hand tool and small equipment cleaning needs. Our 1-litre bottle delivers powerful cleaning performance while protecting the environment. Embrace a cleaner, greener future with EnviroBlu.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Claims Management and Forensics Management Platform (for construction projects)
KEY360KEY360 Inc en New York, NY
KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.
Service
In Stock
Service
New
ISO
Midastream Supply Company en Airdrie
The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.
Buy
In Stock
Product
Used
API
Sea Freight
Midastream Supply Company en Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Hoca Oil Tools en Zwartemeer
Elevate Downhole Efficiency with HOCA Oil Tools' Plug Chokes for Tubing In the rapidly evolving landscape of the oil and gas industry, achieving optimal control and efficiency in downhole operations is crucial. HOCA Oil Tools, at the forefront of downhole technology innovation, introduces its Plug Chokes for Tubing – specialized tools designed to revolutionize fluid flow control within the wellbore. Crafted with precision and built to meet the highest industry standards, our Plug Chokes are engineered to enhance the performance and safety of downhole operations. HOCA’s Plug Chokes for Tubing: Precision Control, Unmatched Durability Our Plug Chokes for Tubing are designed for operators who demand precise fluid flow control in their downhole operations. These tools are crucial for managing production rates, minimizing fluid losses, and optimizing well performance. Constructed from high-grade materials resistant to corrosion and wear, HOCA's Plug Chokes ensure reliability and durability under the harshest downhole conditions. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Plug Chokes for Tubing means choosing a solution that stands for innovation, efficiency, and reliability. Our commitment to excellence ensures that our products not only meet but exceed the demands of modern oilfield operations, providing our clients with tools that enhance their downhole success. Integrating our Plug Chokes into your downhole operations marks a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a strategic partner committed to supporting your operational challenges with advanced solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Plug Chokes for Tubing. Partner with us, and take your downhole operations to new heights of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards for reliability, control, and performance in the challenging oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
CWB National Leasing en Winnipeg
Enhance Your Precision with Surveying Tool Leasing from CWB National Leasing Streamlining Your Surveying and Mapping Operations with Cost-Effective Leasing Solutions For businesses in construction, land surveying, architecture, and civil engineering, high-quality surveying tools are essential for accurate measurements and efficient project execution. Leasing surveying tools through Canadian Western Bank (CWB) National Leasing offers a smart, adaptable, and financially astute solution. Here’s how leasing surveying tools can significantly benefit your business: 1. Fast Access to Advanced Surveying Equipment CWB National Leasing understands the need for timely access to precision equipment. They offer a rapid leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround ensures that your surveying tools are delivered and ready for use promptly, enhancing your operational efficiency and project timelines. 2. Enhanced Financial Flexibility Leasing surveying tools with CWB National Leasing increases your buying power. It allows you to spread the cost over periodic payments rather than committing to a large upfront purchase, freeing up capital for other essential aspects of your business. The option to add extra features or accessories to your surveying tools for a small payment increase also allows for customization to meet your specific project needs. 3. Balanced Cash Flow Management Smaller lease payments over the term allow your surveying tools to start contributing to your business’s revenue while still being paid off. This approach helps maintain a healthy balance between expenses and income, which is crucial for business growth and financial stability. 4. Flexible Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing surveying tools can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can optimize your business’s tax position. Conclusion Opting to lease surveying tools through CWB National Leasing is a strategic decision that equips your business with essential precision instruments while maintaining financial agility. It ensures access to state-of-the-art surveying equipment, vital for accurate and efficient project execution, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational capabilities, increased accuracy in projects, and greater profitability, helping your business to excel in its respective field.
Service
In Stock
Service
New
ISO
Poseidon Robotics en Chandler
Empowering Your ROV: Introducing Poseidon Robotics' Mini-HPU (Hydraulic Power Unit) At Poseidon Robotics, we are committed to pushing the boundaries of subsea exploration and ensuring that your ROV missions are equipped with cutting-edge technology. Our latest innovation, the Mini-HPU (Hydraulic Power Unit), is designed to deliver unmatched power and reliability, elevating the capabilities of your hydraulic manipulators and tools on larger ROVs. Compact Powerhouse Don't let the size fool you! The Mini-HPU may be compact, but it packs a powerful punch. With a robust 3 horsepower output, this little dynamo is built to handle the most demanding subsea tasks with ease. The Mini-HPU provides the muscle you need to operate hydraulic manipulators and tools on larger ROVs effectively. Integrated Efficiency Efficiency is the name of the game, and the Mini-HPU excels in this aspect. Integrated within its sleek design is a convenient 1-gallon reservoir, ensuring an uninterrupted flow of hydraulic fluid to keep your operations running smoothly. No need to worry about external reservoirs, as everything you need is perfectly contained within this powerful unit. Adjustable Pressure Relief and Replaceable Filters We understand the importance of adaptability in your subsea operations. The Mini-HPU features an adjustable pressure relief valve, allowing you to fine-tune the pressure to suit your specific needs. Additionally, we've equipped this hydraulic power unit with easily replaceable filters, ensuring that your system stays clean and optimized for peak performance. Reliability at Its Core At Poseidon Robotics, we believe in building products that stand the test of time. The Mini-HPU is no exception. Its high reliability fixed displacement pump ensures consistent and dependable performance, allowing you to focus on your mission without worrying about equipment failures. Unleash Your ROV's Potential With a maximum pressure of 2,500 PSI and a maximum flow of 1.6 gallons per minute (standard pump), the Mini-HPU is a formidable force in the subsea realm. It's designed to tackle a wide range of applications, from deep-sea exploration to intricate industrial tasks. Corrosion-Resistant Design The subsea environment can be harsh and unforgiving, but the Mini-HPU is ready for the challenge. Our engineers have crafted the unit with anodized aluminum, providing exceptional corrosion resistance and eliminating the need for additional paint coatings. Your Trusted Subsea Partner Poseidon Robotics takes immense pride in being a trusted partner for subsea robotics and ROV companies worldwide. The Mini-HPU is a testament to our commitment to delivering advanced solutions that elevate your capabilities and redefine what's possible in the underwater world. Experience the Mini-HPU Difference Ready to take your ROV missions to new depths? Explore the power and versatility of Poseidon Robotics' Mini-HPU and unlock a world of possibilities for your subsea operations. Contact us today and witness the next level of subsea performance with the Mini-HPU by your side.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Valve and Prong Type Equalizing Sub-Assembly
Downhole ToolsHoca Oil Tools en Zwartemeer
Maximize Downhole Functionality with HOCA Oil Tools' Valve and Prong Type Equalizing Sub Assemblies In the complex world of downhole operations, precision and reliability are paramount for ensuring the safety and efficiency of well interventions. At HOCA Oil Tools, we understand the critical nature of these operations and respond with our top-tier Valve and Prong Type Equalizing Sub Assemblies. These specialized tools are designed to address and overcome the unique challenges presented by downhole environments, ensuring that your operations proceed smoothly and effectively. HOCA’s Valve and Prong Type Equalizing Sub Assemblies: Tailored for Excellence Our Valve and Prong Type Equalizing Sub Assemblies are engineered to facilitate the critical process of pressure equalization in downhole operations, particularly during the installation or retrieval of downhole equipment. These assemblies are essential for safely managing pressure differentials, preventing equipment damage, and ensuring the safety of the wellbore and personnel. Available in a variety of configurations to meet different well conditions and requirements, our equalizing subs are constructed with precision and durability in mind. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Valve and Prong Type Equalizing Sub Assemblies means opting for a product backed by expertise, innovation, and commitment to quality. We pride ourselves on providing solutions that not only meet but exceed the rigorous demands of the oil and gas industry. Whether you are facing standard operational tasks or unique downhole challenges, our equalizing subs provide the performance and reliability essential for success. Incorporating our Valve and Prong Type Equalizing Sub Assemblies into your downhole toolkit is a step towards enhanced operational efficiency, safety, and success. With HOCA Oil Tools, you gain more than just equipment; you gain a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and take the first step towards optimized operations. Partner with us and leverage the power of advanced downhole solutions designed to enhance your oilfield success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards in efficiency, safety, and performance in the oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
Mensaje:
Para: proveedor
WI Subsurface Safety Valve 2.72 inch
WI ValveMidastream Supply Company en Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Sea Freight
Hoca Oil Tools en Zwartemeer
Enhance Well Operations with Precision: Discover HOCA Oil Tools' Slip Stop In the world of oil and gas, where the margin for error is minute and the demand for efficiency and safety is paramount, the right downhole tools can make all the difference. At HOCA Oil Tools, we specialize in providing top-tier downhole slick line tools designed to meet and exceed industry challenges. Among our esteemed solutions is the Slip Stop, a critical component designed to bolster downhole operations' safety and effectiveness. HOCA's Slip Stop: The Cornerstone of Safe and Efficient Downhole Operations The Slip Stop by HOCA Oil Tools is engineered to provide unmatched reliability and control in various downhole environments. Crafted with precision from high-grade materials, this tool is designed to anchor securely within the wellbore, preventing the unwanted movement of downhole tools and equipment. It is an essential tool for ensuring the safety and success of numerous downhole activities, from well completion to intervention tasks. Experience the Unparalleled Quality of HOCA Oil Tools At HOCA Oil Tools, our commitment to excellence is reflected in every tool we provide, including the Slip Stop. We understand the complexities and challenges of downhole operations, which is why we are dedicated to delivering solutions that not only meet but exceed the expectations of the oil and gas industry. Incorporating the HOCA Slip Stop into your downhole operations is a step toward safer, more efficient, and more cost-effective well management. Our tools are designed with the end-user in mind, ensuring ease of use, reliability, and, most importantly, operational safety. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who rely on our Slip Stop to enhance their operational capabilities. Partner with us, and elevate your downhole operations with tools crafted for excellence and innovation. With HOCA Oil Tools, you're not just investing in a product; you're investing in peace of mind, operational integrity, and the future success of your downhole activities.
Buy
In Stock
Product & Service
New
API
Air Freight
CSA 12 unit, non-Locking FAST charger rack
Miner's Cap Lamp Charging StationProvix en New Lowell
Optimize Your Charging Process with the CSA 12 Unit Non-Locking FAST Charger Rack from Provix Provix is pleased to offer the CSA 12 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-12BC), a streamlined and efficient charging solution ideal for modern mining, construction, and industrial environments. This charger rack is designed to rapidly charge up to 12 units, making it perfect for smaller teams or spaces. Rapid Charging for Minimal Downtime The CSA 12 Unit FAST Charger Rack is engineered for speed and efficiency, charging WISE LITE2 units in just 4 hours and LAMP3A/4A models in 5 hours. This quick charging capability is crucial for operations where equipment needs to be ready and operational with minimal delay, ensuring continuous productivity. Compact and Space-Saving Design With its non-locking, single-sided design, the CSA charger rack is an ideal solution for operations with limited space. Its compact footprint allows for convenient placement in equipment rooms, workshops, or mobile units, maximizing the utility of available space without sacrificing charging capacity. Versatile and User-Friendly The CSA 12 Unit Charger Rack is not just efficient and space-saving; it’s also incredibly user-friendly. Its straightforward design allows for easy access to all charging ports, facilitating the efficient management of multiple devices. This accessibility is especially beneficial in fast-paced work environments where time is of the essence. Durable and Reliable Construction Constructed to withstand the tough conditions typical in mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures long-term performance, representing a sound investment for operations focused on efficiency and reliability. Ideal for Various Operational Sizes Whether you are part of a smaller mining crew, a construction team, or managing a rental fleet, the CSA 12 Unit Non-Locking FAST Charger Rack is an excellent choice. It allows for effective management of multiple devices, making it versatile for different operational needs. Get Your Charger Rack Today Upgrade your equipment charging station with the Wisdom CSA 12 Unit Non-Locking FAST Charger Rack from Provix. Visit www.provix.net now to learn more about this efficient, space-saving charging solution and take a step towards optimizing your operation’s productivity.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
U-KWIK Cross Coupling Protector
Upset End Cross Coupling ClampsSivam S.p.A. en Spoltore
Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.
Buy
In Stock
New
New
API
Air Freight
Midastream Supply Company en Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
InWaTec Combined en Vechta
Revolutionizing Geothermal Well Interventions: InWaTec Combined's Mini-Coil Services In the dynamic world of geothermal energy production, where the efficient management of well interventions is paramount, InWaTec Combined is pioneering with our Mini-Coil Services. Designed to navigate the unique challenges of geothermal wells, our Mini-Coil Tubing offers a versatile and high-pressure tolerant solution for fluid placements and well stimulation. Geothermal wells demand a delicate balance between precision and strength. Our Mini-Coiled Tubing services are tailored to meet these needs, providing an ideal solution for the small quantity placements of fluids that are often required in geothermal operations. Whether it's for precision acidizing, scale removal, or other chemical treatments, the Mini-Coil is an invaluable tool. Compact Power: Our Mini-Coiled Tubing is compact yet robust, designed to handle the high pumping pressures needed for effective interventions in geothermal wells. Its smaller diameter does not compromise its ability to withstand intense conditions underground. Efficiency in Production: Lifting wells into production efficiently is crucial for maintaining the economic viability of geothermal operations. The Mini-Coil facilitates this by enabling operators to deliver targeted treatments and interventions that can revitalize well performance. Tailored to Geothermal Needs: While traditional coiled tubing operations may be limited by flow and snubbing capabilities, our Mini-Coil Tubing is engineered to overcome these constraints, providing enhanced pressure handling that is especially beneficial in the high-temperature, high-pressure environments characteristic of geothermal wells. It's true that Mini-Coil Tubing has its limitations regarding flow and snub, but what it offers in return is the capacity to handle significantly higher pumping pressures. This attribute is particularly advantageous in geothermal applications where the subsurface conditions can be extreme. InWaTec Combined's commitment to innovation is further demonstrated by the integration of advanced monitoring technologies that accompany our Mini-Coil Services. Real-time data acquisition allows for precise control and assessment of the intervention process, ensuring that operations are not only successful but also conducted with an emphasis on safety and sustainability. In the realm of geothermal energy, where the right interventions can drastically enhance the output and longevity of wells, InWaTec Combined's Mini-Coil Services emerge as a clear choice for operators seeking to optimize their wells. Our services are a testament to our dedication to providing solutions that are both efficient and effective, reducing downtime and maximizing production. Partner with InWaTec Combined for your geothermal well needs and experience the next level of well intervention services. Let our Mini-Coil Tubing unlock the full potential of your geothermal operations, where precision meets power, and innovation drives production.
Service
In Stock
Service
New
API
Land Freight
Premier Removable Production Packer
Premier PackerMidastream Supply Company en Airdrie
The Premier™ packer is a hydraulic-set, large-bore, removable production packer. It combines the performance of a permanent packer with the conveniences of a retrievable packer. The Premier is ideally suited for big-bore completions and multizone stacked-packer completions. Its retrieving options offer new alternatives in high intervention cost applications. We can source from current stock or direct from the manufacturer.
Buy
Made to Order
Product
New
API
Sea Freight
CWB National Leasing en Winnipeg
Elevate Your Craft with Woodworking Equipment Leasing from CWB National Leasing Transforming Your Woodworking Projects with Flexible and Efficient Equipment Solutions For businesses in the woodworking industry, from small workshops to large manufacturing plants, having access to high-quality woodworking equipment is crucial for productivity and craftsmanship. Leasing woodworking equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution to enhance your woodworking capabilities. Here’s how leasing woodworking equipment can benefit your business: 1. Swift Access to Advanced Equipment CWB National Leasing prioritizes your need for efficient operations. They offer a rapid leasing process, typically approving applications and notifying your equipment dealer about payment within 48 hours. This quick turnaround ensures that your woodworking equipment can be delivered and operational swiftly, minimizing any disruption to your projects. 2. Enhanced Financial Power Leasing woodworking equipment with CWB National Leasing increases your buying power. It allows you to spread costs over periodic payments rather than making a large upfront investment, freeing up capital for other areas of your business. Additionally, the option to add extra features or accessories to your equipment for a small payment increase allows for customization to meet your specific production needs. 3. Effective Cash Flow Management Smaller lease payments over the term mean your woodworking equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, which is essential for the financial health and growth of your business. 4. Flexible Payment Structures CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments are manageable and aligned with your financial situation. 5. Potential Tax Benefits Leasing woodworking equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can optimize your business’s tax position. Conclusion Opting to lease woodworking equipment through CWB National Leasing is a strategic decision that equips your business with essential tools while maintaining financial flexibility. It ensures access to state-of-the-art equipment, vital for producing high-quality wood products, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, increased production capacity, and greater profitability, helping your woodworking business to thrive in a competitive market.
Service
In Stock
Service
New
ISO
ALCiT en Mississauga
Fortify Your Datacenter with ALCiT's Qualys Partnership In the realm of datacenter security, the challenge is immense, but the stakes are even higher. ALCiT stands proudly beside Qualys, the trusted sentinel safeguarding 19,000 global businesses across 130 countries. Our partnership with Qualys redefines how you protect, monitor, and enhance your datacenter security, ensuring that vulnerabilities are addressed and threats are thwarted. Qualys: The Shield of Data Security In a world where data is the currency of progress, Qualys reigns as the fortress of protection. Trusted by global businesses and backed by relentless innovation, Qualys has earned its place as the defender of data integrity. ALCiT's partnership with Qualys brings this unrivaled protection to your datacenter. Your Datacenter: Safeguarded, Simplified, Strengthened Comprehensive Inventory: Every asset in your datacenter is meticulously cataloged and kept up-to-date. With Qualys, you gain clarity and control over your infrastructure like never before. Bug Extermination Made Easy: Say goodbye to breaches. Qualys empowers you to effortlessly detect and eliminate bugs that may compromise your datacenter's security. Real-Time Monitoring, Rapid Alerts: The digital landscape evolves, and so should your security. Qualys offers continuous network monitoring, promptly alerting you to any changes that demand attention. Prioritize Threats with Precision: Not all threats are equal. Qualys equips you with the ability to prioritize threats based on their criticality, ensuring that you tackle the most pressing vulnerabilities first. File Validation, Compliance Assured: Compliance isn't a choice; it's a necessity. Centralized file change logging allows you to adhere to compliance standards while maintaining a secure environment. Uncover Stealthy Malware: Malware often lurks in shadows. Qualys' vigilant system flags malware that might evade other defenses, ensuring your datacenter remains a fortress. Unlock Datacenter Security Excellence Today ALCiT's Qualys partnership isn't just a collaboration; it's your key to fortified datacenter security. Experience the power of innovation and protection that safeguards your digital assets and preserves your business's integrity. Experience the power of ALCiT's partnership with Qualys.
Service
Made to Order
Service
New
ISO
CWB National Leasing en Winnipeg
Boost Your Production Efficiency with Punch Machine Leasing from CWB National Leasing Enhancing Your Fabrication Capabilities with Cost-Effective and Flexible Equipment Solutions For businesses in the manufacturing, metalworking, or fabrication industries, punch machines are vital for high-precision shaping and cutting operations. Leasing punch machines through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially sound solution for businesses aiming to enhance their fabrication capabilities. Here’s how leasing punch machines can benefit your business: 1. Rapid Access to Advanced Fabrication Equipment CWB National Leasing recognizes the need for efficient and precise fabrication tools in your business operations. They offer a fast leasing process, with decisions typically made within 48 hours of application submission. This ensures that your punch machines can be delivered and operational quickly, enhancing your production efficiency and reducing downtime. 2. Increased Financial Flexibility Leasing punch machines with CWB National Leasing enhances your buying power. Opting for periodic payments over a large upfront purchase frees up capital for other vital business needs. The flexibility to add extra features or accessories to your punch machines for a small payment increase allows for customization to meet specific production requirements. 3. Effective Cash Flow Management Manageable lease payments over the term allow your punch machines to start contributing to your business’s revenue while still being paid off. This approach helps maintain a healthy balance between expenses and income, crucial for the financial stability and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing punch machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease punch machines through CWB National Leasing is a strategic decision that equips your business with essential fabrication equipment while maintaining financial agility. It ensures access to high-quality punch machines, vital for precise and efficient metalworking, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business to excel in the competitive manufacturing industry.
Service
In Stock
Service
New
ISO
Poseidon Robotics en Chandler
Unleashing the Full Potential of the Lanai ROV with Poseidon M0020 Backplates At Poseidon Robotics, we are dedicated to pushing the boundaries of subsea exploration and empowering our customers with the most advanced and field-friendly tools. Our latest innovation, the Poseidon M0020 backplate, takes the capabilities of our Lanai ROV to new heights, offering a versatile and efficient solution for all your underwater missions. Designed for Field-Friendly Operations When it comes to subsea operations, ease of use and adaptability are paramount. We understand the challenges our customers face in the field, which is why we developed the Poseidon M0020 backplate with their needs in mind. Our team of experts meticulously engineered this backplate to optimize its performance and enhance the overall ROV experience. Unrivaled Connectivity and Expandability The Poseidon M0020 backplate is a feat of engineering, incorporating a carefully planned configuration that includes multiple threaded locations to accommodate various connectors, sensors, and accessories. With 8 locations threaded for 7/16-20 connectors, 7 locations threaded for M10 sensors, and a small M6 location for lights, this backplate opens up a world of possibilities for customization and expansion. Enhanced Functionality with Manipulators and Accessories We designed the M0020 backplate to provide optimal support for a grabber, such as the BLUEPRINTLAB Reach Alpha, and two auxiliary ports for accessories like sonar, USBL, or mini-SVX. This flexibility allows you to tailor the Lanai ROV precisely to your mission requirements, ensuring that you have the right tools at your disposal to get the job done efficiently and effectively. Durable Construction for Deep-Water Missions The Poseidon M0020 backplate is crafted from 7075 Aluminum, renowned for its exceptional strength and durability. This material not only ensures that the backplate can withstand the rigors of challenging subsea environments but also provides a depth rating in excess of 500 meters. With the M0020 backplate, you can explore deeper and reach areas that were previously beyond your grasp. Seamless Integration with Lanai ROV The M0020 backplate is designed specifically for the Lanai ROV, ensuring a perfect fit and seamless integration. As with all our products, the backplate undergoes rigorous testing and quality assurance procedures to meet our stringent standards. When you choose Poseidon Robotics, you can be confident that every component is engineered with precision and dedication to excellence. Elevate Your Subsea Missions with Poseidon Robotics Our Poseidon M0020 backplate is just one example of our commitment to providing innovative solutions that empower our customers to achieve their goals in subsea exploration. Whether you are conducting scientific research, performing complex inspections, or participating in search and rescue operations, our technology equips you with the tools you need to excel in your mission. Discover the Possibilities Today Explore the limitless possibilities that the Poseidon M0020 backplate brings to your Lanai ROV. Take your subsea operations to new depths and expand your capabilities with ease. Get in touch with Poseidon Robotics today to learn more about our advanced backplate and how it can revolutionize your underwater missions. Choose Poseidon Robotics for Unmatched Performance As the premier provider of subsea robotics and ROV solutions, Poseidon Robotics stands as a trusted partner to professionals worldwide. Our dedication to innovation, quality, and customer satisfaction sets us apart, and we are ready to join you on your journey of discovery beneath the waves. Let us be your guide to unlocking the hidden wonders of the deep ocean.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Virtual Project Planning and Scheduling for EPC/EPCM Projects – Corporate Package
KEY360 Inc en New York, NY
SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT
Service
In Stock
Service
New
ISO
CWB National Leasing en Winnipeg
Elevate Your Business Ambiance with Coffee Machine Leasing from CWB National Leasing Brewing Success with Advanced and Cost-Effective Beverage Solutions For businesses in the hospitality sector, offices, or any setting where offering a quality coffee experience is essential, having a top-notch coffee machine can significantly enhance customer satisfaction and employee morale. Leasing coffee machines through Canadian Western Bank (CWB) National Leasing presents a flexible, economical, and practical solution for businesses looking to upgrade their beverage services. Here’s how leasing coffee machines can benefit your business: 1. Swift Access to High-Quality Coffee Machines CWB National Leasing values the importance of enhancing your business ambiance and offers a rapid leasing process. With decisions typically made within 48 hours of application submission, your coffee machines can be delivered and operational quickly. This efficiency means you can start offering premium coffee experiences without significant delay, enhancing your customer service and workplace environment. 2. Enhanced Financial Power Leasing coffee machines with CWB National Leasing boosts your financial flexibility. It allows you to spread costs over manageable periodic payments rather than making a large upfront investment, freeing up capital for other key business needs. The option to add extra features or accessories to your coffee machines for a small payment increase allows for customization to meet your specific service requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your coffee machines start contributing to your business’s ambiance and productivity while being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing coffee machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease coffee machines through CWB National Leasing is a strategic decision that equips your business with essential beverage equipment while maintaining financial agility. It ensures access to state-of-the-art coffee machines, vital for delivering high-quality coffee experiences, without the financial burden of a large upfront investment. This leasing approach enables enhanced customer satisfaction, improved employee well-being, and increased overall appeal of your business setting.
Service
In Stock
Service
New
ISO
Claims Management and Forensics Management Platform (for construction projects)
KEY360KEY360 Inc en New York, NY
KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.
Service
In Stock
Service
New
ISO
KEY360 Inc en New York, NY
KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.
Service
In Stock
Service
New
ISO
Provix en New Lowell
Maximize Your Mining Equipment's Performance with the Wisdom NWB-25A Charger from Provix Provix is proud to introduce the Wisdom NWB-25A Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This advanced charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Universal Compatibility and High Efficiency The NWB-25A Charger is versatile and adaptable, with AC input compatibility ranging from AC 100-240V +/- 10%, 0.3A, 50-60 Hz, ensuring it can be used in various locations around the world. It also features a DC input of 7~30 V, 1.7 A, making it suitable for a wide range of applications. Optimized Charging for Wisdom Equipment Designed to work seamlessly with Wisdom's range of mining lamps, the NWB-25A offers a maximum DC output voltage of 4.56 ± 0.05 V and a DC output current of 2400 mA ± 100 mA. This ensures fast and efficient charging times: 5 hours for the KL8M, 4-5 hours for the KL5M, and 6 hours for the KL12M, minimizing downtime and enhancing productivity. Global Standards Compliance The NWB-25A Charger is equipped with AC plugs that conform to US, EU, UK, or AU standards, catering to different markets and ensuring compliance with global electrical standards. This feature makes the NWB-25A ideal for mining companies operating in multiple countries. Compact and Lightweight Design With its compact size (116 x 76 x 56 mm; 4.6 x 3.0 x 2.2 in) and light weight (215 g; 7.58 oz), the NWB-25A is highly portable, easy to transport, and convenient to use in various settings, from mining sites to office environments. Enhance Your Charging Experience The Wisdom NWB-25A Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit www.provix.net or contact our expert team.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Simplify Your International Transactions
Business FX ServicesDunbridge Financial en Oakville
Unlock Global Success with Dunbridge Financial's Business Services: Simplify Your International Transactions As a thriving international business, you understand the importance of efficient and cost-effective financial solutions. At Dunbridge Financial, we are your trusted partner in navigating the complexities of global commerce. Our Business Services are tailor-made to help you streamline your international transactions, ensuring you stay ahead of the competition and achieve new heights of success. Pay Invoices with Foreign Exchange Advantage Paying suppliers in local currency gives you a strategic edge, providing access to foreign exchange advantages and better pricing. With Dunbridge Financial, you can take full advantage of these benefits, empowering your business with optimized financial transactions. One Platform for All Your International Business Needs With Dunbridge Financial, managing your international business has never been easier. Experience the convenience of our elegant platform, where you can collect, manage, and pay foreign currencies seamlessly, all from one centralized location. Say goodbye to complexity and uncertainty in your international dealings - we are here to make it simple and secure. Concierge Customer Service - Your Success Is Our Priority At Dunbridge Financial, we believe in embedding ourselves with our customers to understand their unique needs thoroughly. Every customer is assigned a dedicated account manager who will work closely with you to develop a tailored payment strategy that aligns with your business goals. Take the complexity out of your FX payment strategy and let us guide you towards success. Fast and Secure International Payments Time is of the essence in the global marketplace, and Dunbridge Financial is here to ensure your international payments are fast and secure. With our global banking relationships, you can make cost-effective international payments to over 100 currencies and 120 countries. Our market-leading platform, compliant with ISO27001, guarantees your transactions are safe and protected. Multi-Currency Accounts in Your Company's Name Simplify your financial management with multi-currency accounts, all in your company's name. With Dunbridge Financial, you can receive and manage multiple currency balances seamlessly within a single account. Real accounts in your company's name enable you to receive like a local, with IBAN, ACH, and SEPA capabilities. Additionally, you have the flexibility to transfer funds between currencies as needed, empowering you with financial agility. Streamline with Mass Payments Take the burden out of your accounts payable processes with Dunbridge Financial's Mass Payments feature. Easily upload, manage, and pay up to 1000 payees at once, saving time and effort in your financial operations. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider - we are your strategic partner in achieving global success. When you choose us, you gain access to: • A free global business account within 24 hours • An elegant platform that simplifies international transactions • Expert concierge customer service that is tailored to your needs • Fast and secure international payment capabilities • Multi-currency accounts for seamless financial management • Streamlined mass payments to optimize your AP processes Join Us Today and Thrive in the Global Arena Embrace the power of Dunbridge Financial's Business Services and take your international business to new heights. Simplify your international transactions, seize foreign exchange advantages, and secure better pricing for your business. With us by your side, you'll experience seamless financial management, leaving you with more time to focus on what truly matters - your business's growth and success. Empower your business with Dunbridge Financial. Sign up now and unlock the keys to global triumph. Your journey to success begins here.
Service
Made to Order
Service
New
ISO
Air Freight
Virtual Reality / Mixed Reality / Augmented Reality
Software DevelopmentEleks en Toronto
ELEKS VR App Development Services: Shaping the Future Through Immersive Innovation In a world where experiences matter more than ever, harnessing the power of virtual reality (VR), augmented reality (AR), and mixed reality (MR) is not just an option—it's a necessity. As your partner in technological transformation, ELEKS proudly presents VR App Development Services that redefine engagement, streamline processes, and create groundbreaking experiences. ELEKS VR App Development Services: Pioneering Possibilities Create 'Wow' Consumer Engagements: Elevate customer interactions with VR technology that offers 'try before you buy' experiences. Allow customers to virtually explore products before purchase, building brand trust, integrity, and boosting sales by up to 20%. Streamline Your Processes: Leverage the power of VR, AR, and MR to enhance remote collaboration and real-time cooperation. Break geographical barriers and automate workflows in diverse industries, enhancing efficiency, and transforming daily operations. Cut Production Timings and Costs: Revolutionize manufacturing with VR applications that enable pre-construction testing, equipment optimization, and real-time design alterations. Minimize errors, avoid costly missteps, and maximize profits with immersive solutions. Build Better Collaborative Strategies: Bring global teams together through hologram technology, hosting face-to-face meetings in real-time, regardless of location. Elevate engagement, foster cooperation, and reduce expenses with innovative VR/AR/MR solutions. Deliver Industry-Leading Training: Enhance training effectiveness with immersive simulations that resonate far better than traditional methods. Equip your workforce with valuable skills through VR/AR/MR-enabled training programs, bridging gaps between in-house and remote learning. Create Brand-Defining Immersive Experiences: Enter the realm of tangible, immersive experiences to captivate audiences and redefine content delivery. VR technology empowers businesses to satisfy the demand for engagement, delivering content in captivating new ways. ELEKS VR App Development Services: Unveiling the Future Industry Research and Analysis: Our expertise in VR's domain-specific benefits is your advantage. Through comprehensive research, we define the perfect VR/AR/MR solution for your business. Our R&D team immerses themselves in your operations to craft tailored solutions that ensure project success. Custom Software Development: ELEKS offers a suite of VR app development services that span across mobile and accessories. Our expert team crafts immersive experiences without the need for extra hardware. From VR-enabled mobile apps for Android and iOS to game development and web-based solutions, we guide you from ideation to deployment. Cutting-Edge Technologies and Devices: ELEKS is at the forefront of VR technology, working with industry-leading devices and platforms including Oculus Rift, Microsoft Hololens, Steam VR, Google Cardboard, PlayStation VR, and Samsung Gear VR. ELEKS VR App Development Services: Where Reality Meets Vision Join ELEKS on a journey that blends technology and imagination, transforming how you engage with customers, collaborate globally, and deliver exceptional experiences. In a world driven by innovation, be the pioneer with ELEKS.
Service
Made to Order
Service
New
ISO
Sivam S.p.A. en Spoltore
I'm excited to share with you one of our innovative products that can greatly benefit your business. Our cable counters are designed to accurately measure material as it's threaded through the internal wheels, making it an essential tool for the oil industry. What sets our cable counters apart is their ability to add and subtract measurements, giving you precise readings of the amount of material that has been used or remaining. This feature not only saves you time but also ensures accuracy in your operations, which is crucial in the oil industry. Our cable counters are versatile and can be mounted on a pedestal or floor stand, making them easy to use and accessible for your team. This ensures that your operations run smoothly and efficiently. At Sivam, we take pride in our commitment to quality and durability. Our cable counters are built to withstand harsh environments and are made to last, giving you peace of mind and saving you money in the long run. Investing in our cable counters will give you a competitive edge in the oil industry, making your business more efficient and profitable. Contact us today to learn more about our products and how they can benefit your operations.
Buy
In Stock
Manufacturer
New
ISO
Air Freight
Midastream Supply Company en Airdrie
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Currency Management in Foreign Lands
Personal FX ServicesDunbridge Financial en Oakville
Unlock Local Currency Access Anywhere with Dunbridge Financial's Personal Services Imagine traveling to a new country and seamlessly accessing the local currency as if you already had a local bank account. With Dunbridge Financial's Personal Services, this dream becomes a reality. We understand the importance of having local currency at your fingertips when you need it, and our innovative solutions are designed to make your financial experiences hassle-free and empowering. Access Local Currency Anywhere You Go Traveling to a new country is an adventure, but managing your finances in a foreign land can be a challenge. At Dunbridge Financial, we believe that you should have the freedom to access local currency effortlessly. Our Personal Services provide you with the tools you need to make your travel experiences smooth and enjoyable. Personal Services for Your Peace of Mind At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial needs. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is at the heart of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is paramount to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Empower Your Financial Freedom Don't let financial limitations hinder your travel experiences. Join Dunbridge Financial today and experience a world of ease, convenience, and security. Whether you need local currency while traveling or making international money transfers, we are here to make your financial journey a breeze. Empower your financial freedom with Dunbridge Financial. Sign up now and unlock a seamless, worry-free financial experience. Access local currency anywhere you go and embrace a world of limitless possibilities.
Service
Made to Order
Service
New
ISO
Air Freight
CRM Consulting and Implementation
Software DevelopmentEleks en Toronto
Elevate Your Business with ELEKS CRM Consulting and Implementation Services In the realm of modern business, customer relationships are the cornerstone of success. Introducing ELEKS CRM Consulting and Implementation Services – your gateway to harnessing cutting-edge technologies that enhance operations, amplify performance, and drive sales. Join the ranks of industry leaders who have unlocked the power of CRM systems to revolutionize customer engagement, streamline processes, and maximize profits. Experience the ELEKS Advantage: Boost Leads, Ignite Sales: Welcome to a new era of sales excellence. ELEKS helps you pinpoint and implement the perfect CRM system tailored to your organization's needs. This translates into access to cutting-edge tools, enabling sales process automation, pipeline planning, and predictive forecasting. Expand your marketing reach to boost lead volumes and witness improved conversion rates. AI-powered personalization, cross-selling, and upselling further elevate your average deal size. Enhance Retention, Fuel Lifetime Value: Customers are the heartbeat of your success. With the right CRM system, you can create a customer-centric ecosystem that skyrockets sales and marketing ROI. Personalized communication and tailored offerings not only nurture existing clients but also boost customer lifetime value. AI-driven insights into customer behavior provide the ammunition needed to reduce churn rates by offering targeted discounts, benefits, and data-driven recommendations. Elevate Customer Experience: Step into a realm of customer service mastery. Automated processes streamline support, enabling swifter and more personalized responses tailored to individual needs. Adopt an omnichannel approach for seamless communication. The magic doesn't end here – gain a 360° view of customer behavior and preferences, paving the way for tailored approaches, heightened client satisfaction, and a significant reduction in customer attrition. Foster Collaboration for Peak Performance: In a connected world, collaboration reigns supreme. ELEKS' enterprise software experts ensure the implementation of a CRM system that fits like a glove, offering optimal configuration and setup. Experience collaborative workflows and centralized customer management. A unified source of customer data fuels better team alignment, propelling your workforce towards peak performance and remarkable business outcomes. Unleash Potential with ELEKS CRM Consulting Services: Expert Guidance, Optimal Outcomes: Navigate the labyrinth of CRM choices with confidence. Our diverse team of cross-industry enterprise software experts guides you in selecting the best-fit CRM system. From system selection to implementation and customization, ELEKS ensures a seamless journey tailored to your business's unique context and needs. Ongoing Support, Unwavering Excellence: Decades of experience mean we're poised to identify and address any challenges that might arise during your enterprise system's implementation. Our industry-leading CRM support ensures your CRM software performs optimally, empowering your operations to soar to new heights. Optimize Your Processes, Elevate Productivity: When existing systems falter, ELEKS steps in. We analyze your processes, identify bottlenecks, and streamline your operations. Our expert team configures and sets up your system, enhancing productivity and unlocking its full potential for tangible returns. Smooth Implementation, Seamless Transition: For those venturing into enterprise resource management systems, we provide comprehensive support. Our experts guide you through every step, from project roadmap preparation and technical task scoping to stakeholder alignment and change management. Expert Team, Seamless Onboarding: Our extensive pool of skilled software specialists becomes your support network. They configure an expert team that navigates enterprise application consultancy, implementation, training, and ongoing assistance, ensuring your enterprise solution's long-term success. Unveil Opportunities for Growth: With decades of industry experience, our trusted consultants assess your enterprise software ecosystem. We identify areas for improvement and propose integration opportunities that maximize efficiency and cost-effectiveness. ELEKS: Where Vision Meets Implementation Excellence: ELEKS CRM Consulting and Implementation Services redefine what's possible in the realm of customer relationship management. Empower your organization with the tools to forge lasting customer bonds, streamline operations, and propel sales to new heights. Step into the future with confidence, knowing that ELEKS is your trusted partner in achieving CRM-driven success.
Service
Made to Order
Service
New
ISO
Marlin Oil Tools en Calgary
Introducing the BBT Boot Basket from Marlin Oil Tools: The Ultimate Solution for Efficient Debris Management in Oil and Gas Operations Marlin Oil Tools is proud to present the BBT Boot Basket, a cutting-edge tool designed for optimal debris management during oil and gas drilling, milling, or garbage collection operations. Engineered to trap large pieces of sludge that cannot be circulated out of the well to the surface, the BBT Boot Basket is an essential component for maintaining clean and efficient wellbore conditions. Here’s why the BBT Boot Basket is a must-have for your operations. Key Features of the BBT Boot Basket: Efficient Debris Capture: Utilizing a unique design, the BBT Boot Basket efficiently captures large particles. The high-speed upstream flow created by the annular space's small restriction in the lower part of the tool allows for effective trapping as the flow slows down when it passes the upper part, where the gap increases sharply. Optimal Positioning: Designed to be positioned as close to the mill or bit as possible, the BBT Boot Basket ensures that milling procedures can be carried out in normal mode with standard circulation, maximizing debris capture efficiency. Enhanced Capacity Options: To accommodate varying operational needs, several BBT Boot Baskets can be used within the same Bottom Hole Assembly (BHA) to increase overall debris trapping capacity. Customizable Length: Recognizing the diverse requirements of our clients, Marlin Oil Tools offers the option to produce the BBT Boot Basket in different lengths, ensuring a perfect fit for every operation. Durability and Ease of Maintenance: The simple yet robust design of the BBT Boot Basket not only ensures excellent strength characteristics for withstanding torsion and tension but also allows for quick and easy redress, minimizing downtime and extending tool life. Elevate your wellbore cleaning operations with the BBT Boot Basket from Marlin Oil Tools, a premier solution for trapping large sludge particles during drilling, milling, or garbage collection in the oil and gas industry. Featuring an efficient design for optimal debris capture and customizable length options, the BBT Boot Basket enhances operational cleanliness and efficiency. With the capability to position the tool close to the mill or bit and the option to use multiple units for increased capacity, the BBT Boot Basket is adaptable to various operational needs. Its durable construction and easy maintenance ensure long-term reliability and performance. Choose the BBT Boot Basket for a cleaner, more efficient wellbore. Why Choose the BBT Boot Basket from Marlin Oil Tools? Superior Debris Management: Effectively traps large particles, ensuring cleaner wellbore conditions. Customizable and Versatile: Offers options for different lengths and the use of multiple baskets for increased capacity. Durable and Easy to Maintain: Designed for durability and easy redress, reducing operational downtime and costs. Optimized for Efficiency: Enhances milling procedures and maintains normal circulation, optimizing well intervention operations. For operators looking to improve their debris management strategy and maintain efficient well operations, the BBT Boot Basket by Marlin Oil Tools is the ideal solution. Contact us today to learn more about how our innovative oil and gas coiled tubing tools can benefit your operations.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Custom buoyancy options for color, depth rating, and covering area
Buoyancy UnitsPoseidon Robotics en Chandler
Unleashing the Power of Custom Buoyancy Units for Subsea Robotics: Poseidon Robotics At Poseidon Robotics, we are driven by a passion for innovation and a commitment to empowering the subsea exploration industry. Today, we are thrilled to introduce our latest breakthrough - Custom Buoyancy Units. These state-of-the-art buoyancy solutions are designed to enhance the performance and versatility of your subsea robotics, delivering unparalleled control and efficiency in every underwater mission. Tailored to Your Needs: Custom Buoyancy Options We understand that no two subsea missions are the same, and that's why our Custom Buoyancy Units offer a world of possibilities to cater to your specific requirements. From the color and depth rating to the covering area, you have the flexibility to customize every aspect of the buoyancy units, ensuring they align perfectly with your operational needs. Color Customization for Enhanced Visibility In the challenging depths of the ocean, visibility is paramount. Our Custom Buoyancy Units can be tailored in vibrant colors to improve visibility and tracking during underwater operations. Whether you need to differentiate between multiple ROVs in the water or simply want to enhance visual identification, our color options offer the solution you need. Optimal Depth Rating for Any Mission Every subsea mission comes with unique depth challenges. With our Custom Buoyancy Units, you have the power to choose the optimal depth rating that suits your specific application. From shallow-water surveys to deep-sea explorations, our buoyancy solutions are engineered to withstand the pressures of varying depths, ensuring your ROVs perform at their best. Covering Area: Precision Engineering for Stability Stability is crucial in subsea operations, and our Custom Buoyancy Units are meticulously designed to provide the perfect covering area for your ROVs. Through precision engineering and advanced materials, we offer buoyancy units that maintain the ideal balance between buoyancy and stability, resulting in smoother and more controlled underwater movements. Redefining Subsea Robotics with Poseidon Robotics As pioneers in subsea robotics, Poseidon Robotics continues to push the boundaries of innovation. With our Custom Buoyancy Units, we are reshaping the future of underwater exploration. By putting the power of customization in your hands, we enable you to unlock the full potential of your ROVs and achieve new heights in subsea missions. Unleash Your ROV's Potential: Choose Poseidon Robotics Discover the limitless possibilities that await your subsea robotics with Poseidon Robotics' Custom Buoyancy Units. Elevate your underwater operations, optimize your ROV's performance, and gain an edge in your field with our cutting-edge buoyancy solutions. Contact Us Today Take the first step towards transforming your subsea missions with Poseidon Robotics' Custom Buoyancy Units. Our team of experts is ready to assist you in tailoring the perfect buoyancy solution for your unique needs. Embrace the power of customization and embark on a new era of subsea exploration with Poseidon Robotics as your trusted partner. Contact us today to unlock the true potential of your subsea robotics.
Buy
Made to Order
Manufacturer
New
ASME
Air Freight
ALCiT en Mississauga
Elevate Public Sector Operations with ALCiT's Dedicated Solutions In the world of the public sector, the demands are constant – achieving more with less while navigating an ever-expanding sea of complexity. As challenges evolve, cybersecurity remains a paramount concern. ALCiT understands the intricate dynamics you face, and we're here to provide solutions that not only work but excel in the unique landscape of the public sector. Security: Your Ultimate Priority, Our Expertise Cybersecurity isn't just a checkbox; it's a commitment. In the public sector, where the stakes are high and the responsibilities are monumental, security can't be compromised. ALCiT is your dedicated partner, ensuring that every solution we provide is fortified with security measures that align with the gravity of your mission. A Portfolio Tailored to Excellence ALCiT understands that one-size-fits-all solutions won't cut it. That's why we've curated a portfolio of solutions, each adaptable to your unique needs. Our solutions, rooted in enterprise-grade tools, are pre-configured for optimal performance, delivering maximum value in record time. Whether deployed individually or as an integrated suite, we ensure your operations run seamlessly. Public Sector Solutions That Excel Security Operation Center (SOC) as a Service: Trust is earned through vigilance. Our 24/7 SOC monitoring offers round-the-clock surveillance, providing real-time threat detection and response. In just weeks, your security operations will be elevated to new heights. Network Access Control (NAC): Control isn't a luxury; it's a necessity. ALCiT's NAC empowers you to regulate network access, ensuring only authorized devices enter your domain, bolstering security and control. Network Refresh: Simplify your network management and enhance security posture with our network refresh solutions. Choose between a Service-based approach or a purchase model – either way, we ensure your network is optimized for success. Secure Today, Empower Tomorrow ALCiT's commitment to the public sector goes beyond services; it's a partnership built on trust and excellence. Let us empower your operations, enable your teams, and ensure your data remains fortified against the evolving challenges of the digital realm. Elevate public sector operations with ALCiT's dedicated solutions.
Service
Made to Order
Service
New
ISO
Digital
Poseidon Robotics en Chandler
Poseidon Robotics' Custom Lift Points: Unparalleled Strength for Your Subsea Lifting Needs When it comes to subsea operations, lifting heavy loads with precision and safety is a paramount concern. At Poseidon Robotics, we are proud to introduce our state-of-the-art Custom Lift Points—a breakthrough in subsea lifting technology. Engineered for exceptional strength and load-bearing capabilities, our Custom Lift Points are built to withstand the most challenging underwater lifting tasks. Strength Meets Customization At Poseidon Robotics, we understand that no two subsea projects are the same. That's why our Custom Lift Points are designed with versatility and customization in mind. We work closely with you to tailor our lift points to your specific requirements, ensuring that they seamlessly integrate with your subsea equipment, ROVs, or other subsea systems. Load Tested to Perfection Safety is at the core of everything we do at Poseidon Robotics. Our Custom Lift Points undergo rigorous load testing to ensure they exceed industry standards and can handle immense weights with ease. Rest assured that our lift points are reliable and dependable, giving you peace of mind during critical lifting operations. A Robust Solution for All Environments Subsea environments can be harsh and unforgiving, but our Custom Lift Points are up to the challenge. Crafted from high-quality materials, our lift points offer excellent corrosion resistance, making them suitable for prolonged underwater use without compromising on strength and performance. Versatility and Adaptability Whether you're dealing with offshore installations, subsea construction, or scientific research, our Custom Lift Points adapt to diverse applications. Their flexible design allows for easy integration into various subsea equipment and systems, giving you the freedom to tackle a wide range of projects efficiently. A Commitment to Excellence Poseidon Robotics takes pride in our commitment to excellence. Our team of experienced engineers and technicians ensures that each Custom Lift Point is meticulously crafted to meet the highest standards of quality and reliability. We leave no stone unturned in delivering lifting solutions that empower your subsea operations. Experience the Power of Poseidon Robotics' Custom Lift Points Embrace a new era of subsea lifting with Poseidon Robotics' Custom Lift Points. With unbeatable strength, unmatched customization, and unwavering safety, our lift points redefine what's possible beneath the waves. Join the Poseidon Robotics Revolution Unlock the potential of your subsea projects with Poseidon Robotics as your trusted partner. Our Custom Lift Points, load tested to an astounding 55,000 lbs, are here to elevate your subsea lifting capabilities to new heights. Discover the Future of Subsea Lifting Take the next step in your subsea journey with Poseidon Robotics. Contact us today to explore the possibilities of our Custom Lift Points and embark on a transformative subsea lifting experience. At Poseidon Robotics, we lift the world below the surface.
Buy
Made to Order
Manufacturer
New
ASME
Air Freight
B-KWIK Control Line and Cable Protector
Dual Completion CAST Cross Coupling ProtectorSivam S.p.A. en Spoltore
Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.
Buy
In Stock
Manufacturer
New
API
Air Freight
Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Well Treatment Efficiency! Are you ready for a game-changing solution in well treatment? Look no further than Thru-Tubing Acid Stimulation by StimStixx Technologies. Our innovative product offers quick and easy deployment via electric wireline, providing you with a seamless experience from start to finish. We offer two powerful options to meet your specific needs: HCL and HCL/HF acid blends. With our specially formulated solid acid stick, delivered through slickline, wireline, coil tubing, or tractor conveyance, we ensure heated acid vapor is precisely directed to the zone of interest, providing pinpoint accuracy. The secret behind our success lies in the highly reactive nature of our heated acid vapor. It penetrates contaminants and carbonate scale with increased efficiency, resulting in enhanced contact with the formation. The vapor quickly vaporizes and becomes fully spent down-hole, thanks to its high reactivity and relatively low volume. This unique feature eliminates the need for post-treatment clean-up or disposal, ensuring a cleaner and safer operation. But the benefits don't stop there. Thru-Tubing Acid Stimulation offers numerous advantages that will transform your well treatment process. Our technology reduces CO2 emissions, helping you contribute to a greener future. With reduced downtime and simple implementation, you can save valuable time and resources. The increased precision of our product guarantees optimal results, while its fast-acting nature ensures efficient operations. Lower manpower, rig, and equipment costs further enhance the cost-effectiveness of our solution. Additionally, you can bid farewell to worries about corrosion and wear on machinery, as our product minimizes these concerns. And with no surface spillage and reduced exposure to hazardous materials, safety becomes a top priority. Join the Thru-Tubing Acid Stimulation revolution today and experience the unparalleled efficiency and effectiveness of StimStixx Technologies. Trust us to elevate your well treatment process to new heights.
Buy
In Stock
Product & Service
New
API
Air Freight
Hoca Oil Tools en Zwartemeer
Elevate Downhole Efficiency with HOCA Oil Tools' Plug Chokes for Tubing In the rapidly evolving landscape of the oil and gas industry, achieving optimal control and efficiency in downhole operations is crucial. HOCA Oil Tools, at the forefront of downhole technology innovation, introduces its Plug Chokes for Tubing – specialized tools designed to revolutionize fluid flow control within the wellbore. Crafted with precision and built to meet the highest industry standards, our Plug Chokes are engineered to enhance the performance and safety of downhole operations. HOCA’s Plug Chokes for Tubing: Precision Control, Unmatched Durability Our Plug Chokes for Tubing are designed for operators who demand precise fluid flow control in their downhole operations. These tools are crucial for managing production rates, minimizing fluid losses, and optimizing well performance. Constructed from high-grade materials resistant to corrosion and wear, HOCA's Plug Chokes ensure reliability and durability under the harshest downhole conditions. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Plug Chokes for Tubing means choosing a solution that stands for innovation, efficiency, and reliability. Our commitment to excellence ensures that our products not only meet but exceed the demands of modern oilfield operations, providing our clients with tools that enhance their downhole success. Integrating our Plug Chokes into your downhole operations marks a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a strategic partner committed to supporting your operational challenges with advanced solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Plug Chokes for Tubing. Partner with us, and take your downhole operations to new heights of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards for reliability, control, and performance in the challenging oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
Eleks en Toronto
ELEKS: Your Ultimate Nearshore Software Development Partner Unlock the potential of nearshore software development with ELEKS – your gateway to building top-tier technology solutions across borders. With 11 delivery centers spanning 8 countries, we offer you a seamless collaboration experience that transcends geographical barriers and propels your projects to new heights. ELEKS Nearshore Software Development: The Future of Collaboration Time Zone and Geographical Alignment: Experience a level of synchronicity that offshore development can't provide. ELEKS nearshore software development ensures smooth communication, collaboration, and project delivery. Our nearshore advantage means regular onsite visits and a working partnership that's as cohesive as it is efficient. Unified Cultural Approach: Integration goes beyond technology – it's about embracing culture. Our experts seamlessly blend with your in-house team, adopting your unique ethos. Beyond that, we transfer vital process and behavior-change knowledge, ensuring a truly unified and synergistic approach. Faster Product Launch: Elevate your go-to-market strategy with ELEKS as your nearshore development partner. Our streamlined processes and collaborative approach mean you can launch your product twice as fast. Time is of the essence in today's dynamic market – we help you seize it. Superior Quality of Work: Satisfaction is not a target; it's a standard. At ELEKS, we never rest until you're completely satisfied. Our unmatched client satisfaction rating of 97% speaks volumes about our commitment to excellence. Trust us to deliver top-notch results. Access to Top Talent: ELEKS' talent pool boasts 2000+ multi-skilled specialists rooted in math and physics. This means you can assemble the perfect team to bring your vision to life. The right talent is the foundation of success – with us, it's a given. Dedicated Team: Complexity meets capability with our dedicated teams. We handpick specialists with tailored skills to flawlessly execute your software vision. No matter how intricate your project, our experts are up to the task. ELEKS Global Presence: Spanning 18 locations across three continents, ELEKS ensures swift and streamlined communication. With us, you'll experience the efficiency and cost-saving benefits of offshore development coupled with accessible, onsite collaboration. ELEKS Nearshore Software Development: Where Innovation Meets Excellence Our Nearshore Software Development Services: Our portfolio is a testament to three decades of innovation and expertise. With a wide range of market-leading software and consultancy services, we cater to global clients with diverse needs. What Sets ELEKS Apart? • Nearly three decades of custom software development excellence • Extensive technology consulting prowess • Deep strategic product design proficiency with a UX-certified team • One of Ukraine's largest data science teams • Mitigate investment risk with MVP development • Trailblazing technological innovation through our in-house R&D lab Nearshore vs. Offshore vs. Onshore: A Winning Formula with ELEKS When scaling or upskilling is the name of the game, onshore development can be effective but pricey. Offshore options save you time and money, but often come with control trade-offs. ELEKS introduces the winning formula: nearshore development. It blends cost efficiency with quality, offering streamlined communication and onsite visits without compromising savings. ELEKS Nearshore Software Development: Your Bridge to Innovation Experience the best of both worlds – a nearshore team that combines accessibility with efficiency. ELEKS empowers you to transcend borders, embrace innovation, and redefine success. With us, your nearshore journey is a step towards a more collaborative and prosperous future.
Service
In Stock
Service
New
ISO
Inicia sesión para añadir favorito